Investigation of perfluoroalkyl carboxylic and sulfonic acids in leachates from industrial and municipal solid waste landfills,and their treated waters and effluents from their closest leachate treatment plants

Journal of Material Cycles and Waste Management - Per- and polyfluoroalkyl substances (PFASs) are used in products, such as aqueous film-forming foam and fluorochemical surfactants, because of...     

(137)Cs concentration in zooplankton and its relation to taxonomic composition in the western North Pacific Ocean

To study the role of zooplankton in the transport of (137)Cs in the ocean, zooplankton samples were collected in October 2005 and June 2006 in the western North Pacific Ocean. The peak zooplankton biomass was observed in the surface layer, and gelatinous plankton was more abundant in October 2005 than in June 2006 reflecting exchange of water masses. The concentrations of (137)Cs in zooplankton varied from 11 to 24 mBq kg wet(-1) and were higher in October 2005 than in June 2006. The elevated abundance of gelatinous zooplankton probably led to higher concentration of (137)Cs in zooplankton in October 2005. Annual export fluxes of (137)Cs by ontogenetic vertical migrant copepods were estimated to be 0.8 and 0.6 mBq m(-2) year(-1) at 200 and 1000 m depths, respectively; this suggested that transport of (137)Cs by zooplankton may be no trivial pathway.     

Toxic elements in well water from Malaysia

Toxic elements present in well water that is used for drinking pose a threat to the human health in many countries. However, there are few reports on the toxic elements in well water in Malaysia. Since a native doctor informed us about the increasing number of patients with depigmented skin (vitiligo) in Rosob Village, Sabah State, Malaysia, the origin of diseases associated with well water was suspected. Thus, the concentrations of 15 toxic elements in 52 well water samples from Rosob (n = 21), and the control areas of Pitas (n = 8) and Telaga (n = 23) within the same state were measured. No toxic elements with levels exceeding that of the WHO health-based guidelines were detected in the well water samples from Pitas and Telaga. On the other hand, the concentration levels of arsenic (As), uranium (U), and manganese (Mn), independently found in 19% (4/21), 4.8% (1/21), and 19% (4/21), respectively, of the well water samples from Rosob, exceeded the levels given in the WHO health-based guidelines. In the well water samples from Rosob, the average concentration of Mn was found to be higher and its maximum value with levels up to 10-fold higher, respectively, than the value in the WHO health-based guidelines. Significant correlations between Mn and As and between Mn and U were noted. Thus, for the first time, the results of this pilot study showed that the levels of the toxic elements in 42.9% (9/21) of well water samples from Rosob in Malaysia were higher than the values in WHO health-based guidelines indicating the need for further studies.     

Evaluation of diffusive gradients in thin films technique (DGT) for measuring Al, Cd, Co, Cu, Mn, Ni, and Zn in Amazonian rivers

Studies concerning the lability and bioavailability of trace metals have played a prominent role in the search for contamination of water resources. This work describes the first application yet of the diffusive gradients in thin films technique (DGT) to the determination of the fraction of free plus labile metals in waters from the Amazon Basin. Due to the complexity of the use of DGT for samples with low ionic strength and high organic matter content (characteristic of Amazonian rivers), a new analytical procedure was developed. The method is based on the determinations of apparent diffusion coefficients (D_ap) in the laboratory, by performing deployments in samples collected in the corresponding sites of study. The D_ap thereby determined is then used for in situ measurements. The suitability of the proposed approach for determination of labile Al, Cd, Co, Cu, Mn, Ni, and Zn in the Amazon River and Rio Negro (English: Black River) was evaluated. Except for Co, Mn (in a deployment at Rio Negro), Ni and Zn (in a deployment at Amazon River), labile in situ measurements were lower or similar to dissolved concentrations, indicating suitability of the proposed approach.     

Risk/benefit analysis of prohibition of the mercury electrode process in caustic soda production

This study attempts a risk-benefit analysis of the Japanese government decision of the prohibition of the mercury electrode process used for production of caustic soda in 1973. The reduction in human health risk and the costs incurred due to the decision are evaluated, on the basis of which an implicit value of its benefit-risk (BRR) ratio is estimated. Human health risk is evaluated in terms of loss of life expectancy, which enables us to quantify and compare human health risks, irrespective of cancer or noncancer toxic risks. The value of BRR of the decision is calculated to be 570 million yen, approximately U.S. $5.7 million, per life-year saved. Comparing the BRR values of a couple of other policies enacted or proposed in Japan, ranging from 24 to 45 million yen per life-year saved, its value is very high. This result implies that the decision in study is not cost-effective.     

Biological removal of selenate in saline wastewater by activated sludge under alternating anoxic/oxic conditions

Removal of selenate in saline wastewater by activated sludge was examined. Sequencing batch reactor was operated under alternating anoxic/oxic conditions. Above 97% removal of soluble selenium (Se) was achieved continuously. Major Se removal mechanism varied depending on the length of aeration period. Various Se-reducing bacteria likely contributed to coordinately to Se removal. Selenium (Se)-containing industrial wastewater is often coupled with notable salinity. However, limited studies have examined biological treatment of Se-containing wastewater under high salinity conditions. In this study, a sequencing batch reactor (SBR) inoculated with activated sludge was applied to treat selenate in synthetic saline wastewater (3% w/v NaCl) supplemented with lactate as the carbon source. Start-up of the SBR was performed with addition of 1–5 mM of selenate under oxygen-limiting conditions, which succeeded in removing more than 99% of the soluble Se. Then, the treatment of 1 mM Se with cycle duration of 3 days was carried out under alternating anoxic/oxic conditions by adding aeration period after oxygen-limiting period. Although the SBR maintained soluble Se removal of above 97%, considerable amount of solid Se remained in the effluent as suspended solids and total Se removal fluctuated between about 40 and 80%. Surprisingly, the mass balance calculation found a considerable decrease of Se accumulated in the SBR when the aeration period was prolonged to 7 h, indicating very efficient Se biovolatilization. Furthermore, microbial community analysis suggested that various Se-reducing bacteria coordinately contributed to the removal of Se in the SBR and main contributors varied depending on the operational conditions. This study will offer implications for practical biological treatment of selenium in saline wastewater.     

Desorption characteristics of kaolin clay contaminated with zinc from electrokinetic soil processing

A number of bench scale laboratory column tests were carried out using a newly designed and developed electrokinetic cell to investigate the fundamental behavior of zinc-spiked kaolin clay subjected to an electric field. Laboratory investigations focused on (i) zinc migration by the combined effects of electromigration and electro-osmosis and (ii) the electrically induced desorption characteristics of zinc-contaminated kaolin that occurred during processing. The correlations of the applied voltage gradient, electro-osmotic flow rate, and the development of a pH gradient were examined and evaluated. The results showed that the removal efficiency was high during the early stage of processing due to rapid desorption by electrokinetic effects in the cathode region. However, the majority of zinc migrating from the anode was precipitated due to the high pH environment in the cathode region.     

Simple technology for recycling phosphate from wastewater to farmland in rural areas

A simple technology for phosphate (P _i ) recovery has been developed using a bifunctional adsorption–aggregation agent. The bifunctional agent was prepared by soaking calcium silicates in hydrochloric acid solution. Importantly, recyclable calcium silicates were available almost free of charge from the cement industry and also from the steel industry. The acid treatment was essential not only for enhancing the ability of calcium silicates to remove P _i from aqueous solution but also for enabling the high settleability of removed P _i . On-site experiments using a mobile plant showed that approximately 80% P _i could be recovered from anaerobic sludge digestion liquor at a wastewater treatment plant. This technology has the potential to offer a simple, compact service for recycling P _i from wastewater to farmland in rural areas.     

The origin of extensive colour polymorphism in Plateumaris sericea (Chrysomelidae,Coleoptera)

Evidence is presented to demonstrate that colour polymorphism in a beetle arises from structural colours produced by a five-layered reflector in the elytron. The colour of leaf beetles, Plateumaris sericea, ranges across the visible spectrum from blackish-blue to red. The elytra have two distinct layers: epicuticle and exocuticle. Morphological observations reveal that the multilayer structure within the exocuticle differs little among the different colour morphs but the layers within the epicuticle have characteristic thicknesses corresponding to the observed colour. The reflectors, consisting of five layers within the epicuticle, are responsible for all the different colours observed in P. sericea, as shown by theoretical analyses for a multilayer stack, and by showing that removal of the elytral surface, including epicuticle, results in the disappearance of the iridescent colour.