A pragmatic approach to study the groundwater quality suitability for domestic and agricultural usage,Saq aquifer,northwest of Saudi Arabia

The present study deals with detailed hydrochemical assessment of groundwater within the Saq aquifer. The Saq aquifer which extends through the NW part of Saudi Arabia is one of the major sources of groundwater supply. Groundwater samples were collected from about 295 groundwater wells and analyzed for various physico-chemical parameters such as electrical conductivity (EC), pH, temperature, total dissolved solids (TDS), Na⁺, K⁺, Ca²⁺, Mg²⁺, CO₃ ^?, HCO₃ ^?, Cl^?, SO₄ ^2?, and NO₃ ^?. Groundwater in the area is slightly alkaline and hard in nature. Electrical conductivity (EC) varies between 284 and 9,902?μS/cm with an average value of 1,599.4 μS/cm. The groundwater is highly mineralized with approximately 30 % of the samples having major ion concentrations above the WHO permissible limits. The NO₃ ^? concentration varies between 0.4 and 318.2 mg/l. The depth distribution of NO₃ ^? concentration shows higher concentration at shallow depths with a gradual decrease at deeper depths. As far as drinking water quality criteria are concerned, study shows that about 33 % of samples are unfit for use. A detailed assessment of groundwater quality in relation to agriculture use reveals that 21 % samples are unsuitable for irrigation. Using Piper’s classification, groundwater was classified into five different groups. Majority of the samples show Mix-Cl-SO₄- and Na-Cl-types water. The abundances of Ca²⁺ and Mg²⁺ over alkalis infer mixed type of groundwater facies and reverse exchange reactions. The groundwater has acquired unique chemical characteristics through prolonged rock-water interactions, percolation of irrigation return water, and reactions at vadose zone.     

Seasonality in the distribution of dinoflagellates with special reference to harmful algal species in tropical coastal environment,Bay of Bengal

A study was carried out in the coastal waters of Kalpakkam, southeast coast of India, to find out the seasonal variation in dinoflagellate community structure. Samples were collected for a period of 4 years during 2006–2010. During the study 69 species of dinoflagellates were encountered among which Ceratium furca and Prorocentrum micans were most common during all the seasons. Genus Ceratium was found to be the most diverse one with 23 species which was followed by genus Protoperidinium with 16 species. Of 69 species, 27 species were considered as dominant based on their abundance during pre-monsoon (PRM), monsoon (MON) and post-monsoon (POM) periods. Relatively high density and diversity of dinoflagellates were encountered during the PRM period as compared to the MON and POM periods. Abundance pattern of dinoflagellates for three seasons showed the following trend: PRM?>?POM?>?MON. Salinity showed a positive correlation with dinoflagellate community showing its importance in dinoflagellate growth and sustenance. Ammonia and phosphate developed negative correlation with dinoflagellate density indicating the utilization of these nutrients by the dinoflagellate community. The presence of three dinoflagellate associations, broadly representing the three seasons experienced at this location, was evident from the cluster analysis. The study revealed presence of 19 relatively abundant toxic/red tide forming dinoflagellate species in the coastal waters of Kalpakkam.     

Assessment of imidacloprid degradation by soil-isolated Bacillus alkalinitrilicus

Imidacloprid is extensively used on a broad range of crops worldwide as seed dressing, soil treatment, and foliar application. Hence, the degradation potential of bacterial strains from sugarcane-growing soils was studied in liquid medium for subsequent use in bioremediation of contaminated soils. The microbe cultures degrading imidacloprid were isolated and enriched on Dorn’s broth containing imidacloprid as sole carbon source maintained at 28 °C and Bacillus alkalinitrilicus showed maximum potential to degrade imidacloprid. Clay loam soil samples were fortified with imidacloprid at 50, 100, and 150 mg kg^?1 along with 45?×?10⁷ microbe cells under two opposing sets of conditions, viz., autoclaved and unautoclaved. To study degradation and metabolism of imidacloprid under these two conditions, samples were drawn at regular intervals of 7, 14, 28, 35, 42, 49, and 56 days. Among metabolites, three metabolites were detected, viz., 6-chloronicotinic acid, nitrosimine followed by imidacloprid-NTG under both the conditions. Total imidacloprid residues were not found to follow the first-order kinetics in both types of conditions. This paper reports for the first time the potential use of pure cultures of soil-isolated native bacterium B. alkalinitrilicus and also its use along with natural soil microflora for remediation of imidacloprid-contaminated soils.     

A study on the obstacle-induced variation of the gas explosion characteristics

A study on the variation of the gas explosion characteristics caused by the built-in obstacles was conducted in enclosed/vented gas explosion vessels. It has been well known that the obstacles in pipes and long ducts would accelerate the flame propagation, and cause the transition from deflagration to detonation. In this study, the explosion characteristics and the flame behavior of vented explosions and constant-volume explosions were investigated. Experiments were carried out in a 270-liter and 36-liter hexahedron vessels filled with LPG–air mixture. The explosion characteristics of the gas mixture were determined by using a strain-responding pressure transducer. The flame behavior was recorded by using a high-speed video camera. The shape and the size of the obstacle, and the gas concentration, were adjusted in the experiments.

It can be seen from the experimental results that, instead of being accelerated, the flame propagation inside the explosion vessel is decelerated by the plate obstacles fixed at the bottom of the vessel. Also, the characteristics of the enclosed explosion are not so affected by the built-in obstacles as those of the vented explosion are. It is believed that the eddy-induced turbulence behind the obstacle decelerates the flame propagation.     

Characteristics of the vibrating-mesh minimum ignition energy testing apparatus for dust clouds

A novel apparatus for testing the minimum ignition energies of flammable dusts is introduced. Unlike the conventional apparatus (the Hartmann tube), this new apparatus employs a vibrating mesh to produce a dust cloud. Using three kinds of powders, namely lycopodium, anthraquinone and polyacrylonitrile, which are designated as the samples for calibration by the International Electrotechnical Commission (IEC, 1994) standards, fundamental characteristics were experimentally investigated. Concerning the minimum ignition energies (MIEs), the new testing apparatus worked well for two samples, lycopodium and polyacrylonitrile. The MIE for anthraquinone, however, was by far larger than the expected value. We concluded that the aggregation of anthraquinone particles is the main cause of the difference and is attributable to both the tribo-charges acquired by the particles when passing through the mesh and the filamentary shape of the crystal. Other essential factors for characterizing the testing apparatus, such as the concentration of dust, the shape and spacing of the sparking electrode system, and the impedance of the sparking circuit are discussed.     

Epidemiology of occupational acute traumatic hand injuries: a literature review

The purpose of this review was to summarize the literature on occupational, acute, traumatic hand injury and suggest directions for future research. In 1996, the leading occupational injury treated in United States' hospital emergency departments was an acute hand injury (e.g. laceration, crush or fracture). These injuries affected 30% of an estimated 3.3 million injured workers (990,000). Cuts and lacerations of the fingers ranked third after back and leg strains in the number of lost workday cases in the USA in 1994. The incidence rate of hand injuries studied in seven manufacturing environments around the world ranged from 4 to 11 per 100 workers per year. Workers aged 24 years or less had the highest risk of hand injury. Men had higher rates of severe hand injury than women.Despite the high frequency and significant amount of lost work time associated with these injuries, they are poorly understood from an etiological perspective. There is only one case-control study of occupational hand injury in the literature. That study suggested an important role for both fixed (age) and transient risk factors (doing an unusual task) at the time of the injury. More analytic epidemiological research is needed to identify potentially modifiable risk or protective factors (e.g. glove use) for acute hand injuries. In this regard, the case-crossover design, a relatively new epidemiological approach using cases as their own controls, could prove an efficient method for determining transient, modifiable risk factors for acute, occupational hand injury.     

Safety climate factors, group differences and safety behaviour in road construction

This study determines the factor structure of safety climate within a road construction organization using a modified version of the safety climate questionnaire (SCQ). It also investigates the relationship between safety climate and safety performance. The SCQ was administered to 192 employees from two districts and in two job categories — construction and maintenance. A behavioural observation measure of safety performance was also developed. Factor analysis derived six factors, which were similar to those obtained in an earlier study using the SCQ. Differences in the safety climate of job sub-groups were found on two of the factors. No differences between the two districts were found. No relationship was found between safety climate and the safety performance measure. While identical safety climate factors cannot apply to all organizations, some general safety climate factors may emerge. Discussion focuses upon the measurement of safety climate.     

An Ecoregional Context for Forest Management on National Wildlife Refuges of the Upper Midwest,USA

To facilitate forest planning and management on National Wildlife Refuges, we synthesized multiple data sources to describe land ownership patterns, land cover, landscape pattern, and changes in forest composition for four ecoregions and their associated refuges of the Upper Midwest. We related observed patterns to ecological processes important for forest conservation and restoration, with specific attention to refuge patterns of importance for forest landbirds of conservation priority. The large amount of public land within the ecoregions (31–80%) suggests that opportunities exist for coarse and meso-scale approaches to conserving and restoring ecological processes affecting the refuges, particularly historical fire regimes. Forests dominate both ecoregions and refuges, but refuge forest patches are generally larger and more aggregated than in associated ecoregions. Broadleaf taxa have increased in dominance in the ecoregions and displaced fire-dependent taxa such as pine (Pinus spp.) and other coniferous species; these changes in forest composition have likely also affected refuge forests. Despite compositional changes, larger forest patches on refuges suggests that they may provide better habitat for area-sensitive forest landbirds of mature, compositionally diverse forests than surrounding lands if management continues to promote increased patch size. We reason that although fine-scale research and monitoring for species of conservation priority is important, broad scale (ecoregional) assessments provide crucial context for effective forest and wildlife management in protected areas.     

Precision placement of separated dairy sludge improves early phosphorus nutrition and growth in corn ( L.)

Efficient use of manure nutrients by crops is necessary to minimize losses to the environment. This field study examined the possibility of replacing side-banded mineral P with precision-placed high-P sludge (6.2-11.0% dry matter) obtained after settling dairy manure slurry. The sludge was injected at about 30 kg P ha (36.0-51.2 m ha) into the soil at corn row spacing, and the corn was planted 5, 10, and 15 cm beside the injection furrow. Controls included no added P and side-banded commercial P fertilizer. The treatments were tested on corn with low and high root colonization by arbuscular mycorrhizae (AM). The study showed that sludge did not impede AM root colonization, corn germination, or seedling growth. Corn plants with both high and low levels of AM colonization responded to the sludge from the three-leaf stage and showed the greatest benefit at the six-leaf stage. Corn responded more to sludge placed at 5 than at 15 cm from the corn rows, whereas the response at the 10-cm spacing was intermediate. There was little difference in seedling growth or final harvest parameters between the side-banded fertilizer P and the 5-cm sludge treatment. The results show a new way to use manure nutrients, namely precision-placement sludge for corn. This may obviate the need for chemical fertilizers for improving farm nutrient balances. Other anticipated benefits are less energy use for hauling and injection of the sludge fraction and reduced risk of nutrient loss by runoff and volatilization (ammonia) and nuisance odors due to injection.