Carbon and energy taxation for CO<Subscript>2</Subscript> mitigation: a CGE model of the Malaysia

Malaysia has made a pledge to reduce voluntarily her carbon dioxide-equivalent (CO₂-e) gas emission’s intensity of gross domestic product by up to 40 % based on 2005 levels by 2020. The country is considering implementing economic instruments, among others, to assist the achievement of emission reduction targets while contributing towards the nation’s energy security and sustainable development goals. This paper develops a computable general equilibrium model with explicit energy-emission linkages to appraise the economy-wide and welfare impacts of carbon and energy tax policies to reduce CO₂ emissions in Malaysia. Results indicate that the negative macroeconomic impacts of carbon and energy taxes are small relative to the quantum of emission reduction. A Hicksian welfare criterion is utilized to determine the impact of revenue natural shifts in carbon and energy taxes. Revenue neutrality assumptions show that carbon taxation is the best choice when it can provide a double dividend if the generated revenue is used for the purpose of consumption subsidy on household purchases. The notion of the double dividend is confirmed when the change in the consumption structure will result in a welfare improvement, while CO₂ emission is decreased effectively. The study also found that carbon tax policy results in greater emission reductions relative to energy taxes, while the use of renewable energy will increase more substantially.     

Permeability measurement and scan imaging to assess clogging of pervious concrete pavements in parking lots

This paper describes a study that used permeability measurement along with physical and hydrological characteristics of 20 pervious concrete pavements in parking lots throughout California. The permeability was measured at five locations: the main entrance, an area with no traffic, and three separate measurements within a parking space at each parking lot. Hydrological and physical site characteristics such as traffic flow, erosion, vegetation cover, sediments accumulation, maintenance practice, presence of cracking, rainfall, and temperature data were also collected for each parking lot. These data were used to perform detailed statistical analysis to determine factors influencing changes in permeability and hence assessing possible cause of clogging. In addition, seven representative core samples were obtained from four different parking lots with permeability ranging from very low to very high. Porosity profiles produced from CT scanning were used to assess the possible nature and extent of clogging. Results showed that there is a large variation in permeability within each parking lot and between different parking lots. In general, the age of the parking lot is the predominant factor influencing the permeability. Statistical analysis revealed that fine sediment (particles less than 38 μm) mass is also an important influencing factor. Other influencing factors with lower significance included number of days with a temperature greater than 30°C and the amount of vegetation next to the parking lot. The combined scanned image analysis and porosity profile of the cores showed that most clogging occurs near the surface of the pavement. While lower porosity generally appeared to be limited to the upper 25 mm, in some core samples evidence of lower porosity was found up to 100mm below the surface.     

A stochastic stormwater quality volume-sizing method with first flush emphasis

A Monte Carlo simulation technique was applied to assess the effect of stormwater quality volume captured by best management practices (BMPs) on the frequency of discharging concentrations of constituents above certain designated threshold limits. The method used an assumption of a power law relationship between the cumulative load and flow to incorporate the first flush effect. The exponent of this relationship was considered a random variable and its frequency distribution was obtained from 78 measured pollutographs from three urban highway sites in West Los Angeles, California. Although the effect of rain depth captured by BMPs is site-specific, the method offered here provides a systematic approach to evaluate the effect of selecting various regulatory guidelines for controlling urban stormwater pollution on the overall discharge of pollutants into waterways. This allows selecting the requirements for capturing runoff volume by BMPs based on the tradeoff between the probability of concentration criteria violation and economic factors.     

Spatial Analysis of Volatile Organic Compounds from a Community-Based Air Toxics Monitoring Network in Deer Park,Texas, USA

In the summer of 2003, ambient air concentrations of volatile organic compounds (VOCs) were measured at 12 sites within a 3-km radius in Deer Park, Texas near Houston. The purpose of the study was to assess local spatial influence of traffic and other urban sources and was part of a larger investigation of VOC spatial and temporal heterogeneity influences in selected areas of Houston. Seventy 2-h samples were collected using passive organic vapor monitors. Most measurements of 13 VOC species were greater than the method detection limits. Samplers were located at 10 residential sites, a regulatory air monitoring station, and a site located at the centroid of the census tract in which the regulatory station was located. For residential sites, sampler placement locations (e. g., covered porch vs. house eaves) had no effect on concentration with the exception of methyl tertiary-butyl ether (MTBE). Relatively high correlations (Pearson r > 0.8) were found between toluene, ethylbenzene, and o,m,p-xylenes suggesting petroleum-related influence. Chloroform was not correlated with these species or benzene (Pearson r < 0.35) suggesting a different source influence, possibly from process-related activities. As shown in other spatial studies, wind direction relative to source location had an effect on VOC concentrations.     

Natural dyes and antimicrobials for green treatment of textiles

Increasing studies on extraction, purification and modification processes of natural dyes and antimicrobials, and their subsequent application on textiles demonstrate the revival of natural dyeing and finishing. Natural dyes have been widely used in textile coloration since ancient times. But, with advent of man-made synthetic dyes in the mid-nineteenth century, the dye market has been captured due to a variety of competitive properties of synthetic dyes against natural ones such as lower cost, higher fastness, color variety, ability to dye synthetic fibers and availability in large industrial scale. However, most of the synthetic dyes raise some serious problems in human health and cause environmental risks. Due to these drawbacks along with the growing awareness about cleaner surroundings and healthy lifestyle, there has been recently a worldwide interest in the production and application of dyes from two natural sources, plants and microorganisms. Most of these natural dyes have also inherently antimicrobial properties and could consequently possess high medicinal activity. They are extracted from different types of microorganisms as well as various parts of the plants that contain coloring materials such as tannin, flavonoids and quinonoids. Here we review the latest scientific researches on extraction and application of natural dyes/antimicrobials on textiles as effective coloring and antibacterial agents. First, different methods of extraction of natural dyes/antimicrobials will be discussed, and then, current methods of textile treatments and examples of early applications of these dyes on textile processing, properties achieved and the results obtained will be presented.     

A novel pollution index based on the bioavailability of elements: a study on Anzali wetland bed sediments

In this research, we study on the distribution of several elements in bed sediments of Anzali wetland. Anzali, one of the most important international wetlands, is located on the southern coast of the Caspian Sea in Iran. This wetland receives discharges of domestic, agricultural, and industrial wastewater, which affect the distribution of elements. Our contribution in this study is threefold. First, we measured the total concentration of metals as well as their chemical partitioning and bioavailability in the sediments. Second, we calculated anthropogenic portions of metals in the sediment of this area. The results reveal anthropogenic portion of metals as Mo > Mn > Cd > As > Zn > Hg > Co > Sn > Cu > V > Ag > Ni > Pb > Fe > Cr > Al, respectively. We evaluated the intensity of pollution by using an enrichment factor, the geo-accumulation index and the pollution index. All these indices do not take into consideration the bioavailability of the elements. As our third and most important contribution, we introduced a new formula that takes into account the bioavailability of different elements. In comparison with aforementioned pollution indices, our newly introduced pollution index has a higher Pearson correlation with anthropogenic portion of metals. This high-correlation coefficient shows that our proposed pollution index is an effective indicator for determining the level of pollution, while other indices preserve their own merits.     

Cumulative effects of developed road network on woodland—a landscape approach

Population growth, during the twentieth century, has increased demand for new farmlands. Accordingly, road networks have rapidly been developed to facilitate and accelerate human access to the essential resources resulted in extensive land use changes. The present study aims at assessing cumulative effects of developed road network on tree cover of Golestan Province in northern Iran. In order to detect changes over the study period of 1987–2002, the LULC map of the study area was initially prepared from the satellite images of Landsat TM (1987) and ETM+ (2002) using maximum likelihood supervised classification method. Afterwards, a total number of seven landscape matrices were selected to detect cumulative effects of the developed road network on woodland cover. The obtained results indicated that the fragile patches are mainly located at a distance of 171–342 m from the roadside. Furthermore, the majority of the patches affected by cumulative effects of development activities are situated at a distance of 342–684 m from the roadside, over an approximate area of 55 ha. The analysis of landscape metrics revealed that the developed road network has increased the landscape metrics of “the number of patches” and “patches perimeter-area ratio”. It has also followed by a decrease in metrics such as “patches area”, “Euclidean nearest neighbor distance”, “patches proximity”, “shape index”, “contiguity”, and “mean patches fractal dimension”. The road network has also increased the “number of patches” and decreased the “mean patches area” representing further fragmentation of the landscape. With identification of highly affected wooldland cover patches, it would be possible to apply adaptive environmental management strategies to preserve and rehabilitate high-priority patches.     

Hydrochemical and geoelectrical investigation of the coastal shallow aquifers in El-Omayed area, Egypt

Monitoring and assessment of the coastal aquifers are becoming a worldwide concern for the need of additional and sustainable water resources to satisfy demographic growth and economic development. A hydrochemical and geoelectrical investigation was conducted in the El-Omayed area in the northwestern coast of Egypt. The aim of the study was to delineate different water-bearing formations, provide a general evaluation of groundwater quality, and identify the recharge sources in aquifers. Thirty-seven water samples were collected and chemically analyzed from the sand dune accumulations and oolitic limestone aquifers. Fifteen profiles of vertical electrical soundings (VESs) were obtained in the oolitic limestone aquifer to examine the variations of subsurface geology and associated groundwater chemistry. The groundwater reserves in the El-Omayed area are mainly contained in sand dune accumulations and oolitic limestone aquifers. The aquifer of sand dune accumulations contains freshwater of low salinity (average total dissolved solids (TDS)?=?974 mg/l). Groundwater of oolitic limestone aquifer is slightly brackish (average TDS?=?1,486 mg/l). Groundwater of these aquifers can be used for irrigation under special management for salinity control, and regular leaching as indicated by electrical conductivity and sodium adsorption ratio. Results of VES interpretation classified the subsurface sequence of oolitic limestone aquifer into four geoelectric zones, with increasing depth, calcareous loam, gypsum, oolitic limestone, and sandy limestone. Oolitic limestone constitutes the main aquifer and has a thickness of 12–32 m.     

A new method for environmental site assessment of urban solid waste landfills

Regarding various types of pollutant, waste management requires high attention. Environmental site selection study, prior to landfill operation, and subsequently, monitoring and maintaining of the location, are of foremost points in landfill site selection process. By means of these studies, it is possible to control the undesirable impacts caused by landfills. Study ahead aims at examination of effectiveness of a new method called Monavari 95–2 in landfill site assessment. For this purpose, two landfills Rasht and Andisheh, which are, respectively, located on humid and arid areas, were selected as case studies. Then, the results obtained from both sites were compared with each other to find out the weaknesses and strengths of each site. Compared with others similar methods, much more criteria (53 parameters) can be considered within this method, so the results will be more calculable. According to this method, Rasht landfill (site H) is classified as unacceptable landfill site i.e. there is an urgent need for a new suitable site for landfill, while Andishe Landfill (site D) is ranked as acceptable landfill site but needs environmental management program to handle the existing weaknesses.     

Effect of fertilizer application on soil heavy metal concentration

A large amount of chemicals is annually applied at the agricultural soils as fertilizers and pesticides. Such applications may result in the increase of heavy metals particularly Cd, Pb, and As. The objective of this study was to investigate the variability of chemical applications on Cd, Pb, and As concentrations of wheat-cultivated soils. Consequently, a study area was designed and was divided into four subareas (A, B, C, and D). The soil sampling was carried out in 40 points of cultivated durum wheat during the 2006–2007 periods. The samples were taken to the laboratory to measure their heavy metal concentration, soil texture, pH, electrical conductivity, cationic exchange capacity, organic matter, and carbonate contents. The result indicated that Cd, Pb, and As concentrations were increased in the cultivated soils due to fertilizer application. Although the statistical analysis indicates that these heavy metals increased significantly (P value < 0.05), the lead and arsenic concentrations were increased dramatically compared to Cd concentration. This can be related to overapplication of fertilizers as well as the pesticides that are used to replant plant pests, herbs, and rats.