Temporal trends of elements in Turin (Italy) atmospheric particulate matter from 1976 to 2001

The temporal trends of major, minor and trace elements in the total atmospheric particulate sampled in the urban area of Turin (Italy) were determined for the following years: 1976, 1986, 1996 and 2001. The wavelength dispersive X-ray fluorescence (WD-XRF) technique was adopted to determine the concentrations of Ba, Br, Ca, Cl, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, S, Ti and Zn. A smaller number of samples was also analysed by ICP atomic emission spectroscopy (ICP-AES) and the results were compared with those obtained by WD-XRF to confirm their validity. A clear seasonal pattern with higher concentrations of the aforementioned elements in the cold periods was observed. Moreover, a change in the chemical composition of atmospheric particulate matter was evidenced, particularly between the first (1976 and 1986) and the last (1996 and 2001) years. This change can be attributed both to the greater contribution of Pb and Br to atmospheric pollution in the past and, in recent years, to the higher level of pollutants associated with increased vehicular traffic and industrial activities. The application of chemometric techniques (Principal Component Analysis and Cluster Analysis) allowed us to speculate about the main emitting sources influencing the total atmospheric particulate in these years.     

A protocol for the evaluation of genotoxicity in bile of carp (Cyprinus carpio) exposed to lake water treated with different disinfectants

A sensitive and rapid method to evaluate toxic and genotoxic properties of drinking water supplied from Lake Trasimeno (Umbria, Central Italy) was worked out analysing bile in Cyprinus carpio exposed for 20 d to lake water treated with 3 different disinfectants, sodium hypochlorite (NaClO), chlorine dioxide (ClO₂) and peracetic acid (PAA). Fish were sacrificed at 0, 10 and 20 d in order to investigate the time course of these endpoints. An aliquot of bile samples was fractionated by adsorption on C₁₈ silica cartridges and the genotoxic potential of whole bile and of bile fractions was evaluated by the single-cell microgel-electrophoresis (comet) assay on human colonic adenocarcinoma cells (Caco-2). Bile (both whole and fractionated) from specimens exposed to the three disinfectants always showed a genotoxic activity as compared to the control group. The results of this study provide evidence that all three disinfectants cause an increase in bile genotoxicity of chronically exposed fish.     

A high-resolution non-invasive approach to quantify oxygen transport across the capillary fringe and within the underlying groundwater

Oxygen transport across the capillary fringe is relevant for many biogeochemical processes. We present a non-invasive technique, based on optode technology, to measure high-resolution concentration profiles of oxygen across the unsaturated/saturated interface. By conducting a series of quasi two-dimensional flow-through laboratory experiments, we show that vertical hydrodynamic dispersion in the water-saturated part of the capillary fringe is the process limiting the mass transfer of oxygen. A number of experimental conditions were tested in order to investigate the influence of grain size and horizontal flow velocity on transverse vertical dispersion in the capillary fringe. In the same setup, analogous experiments were simultaneously carried out in the fully water-saturated zone, therefore allowing a direct comparison with oxygen transfer across the capillary fringe. The outcomes of the experiments under various conditions show that oxygen transport in the two zones of interest (i.e., the unsaturated/saturated interface and the saturated zone) is characterized by very similar transverse dispersion coefficients. An influence of the capillary fringe morphology on oxygen transport has not been observed. These results may be explained by the narrow grain size distribution used in the experiments, leading to a steep decline in water saturation at the unsaturated/saturated interface and to the absence of trapped gas in this transition zone. We also modeled flow (applying the van Genuchten and the Brooks-Corey relationships) and two-dimensional transport across the capillary fringe, obtaining simulated profiles of equivalent aqueous oxygen concentration that were in good agreement with the observations.     

Arsenic uptake and speciation and the effects of phosphate nutrition in hydroponically grown kikuyu grass (Pennisetum clandestinum Hochst)

Background

This work focuses on the accumulation and mobility properties of arsenic (As) and the effects of phosphate (P) on its movement in Pennisetum clandestinum Hochst (kikuyu grass), grown hydroponically under increasing arsenate (As(V)) concentrations. The uptake of both ions and the relative kinetics show that phosphate is an efficient competitive inhibitor of As(V) uptake. The P/As uptake rate ratios in roots indicate that P is taken up preferentially by P/As transporters. An arsenite (As(III)) efflux from roots was also found, but this decreased when the arsenate concentration in the solution exceeded 5???M.

Methods

Increases in both arsenite and arsenate concentrations in roots were observed when the arsenate concentration in the solution was increased, and the highest accumulation of As(III) in roots was found when plants were grown at 5???M As(V). The low ratios of As accumulated in shoots compared to roots suggest limited mobility of the metalloid within Kikuyu plants.

Results

The results indicate that arsenic resistance in kikuyu grass in conditions of moderate exposure is mainly dependent on the following factors: 1) phosphate nutrition: P is an efficient competitive inhibitor of As(V) uptake because of the higher selectivity of membrane transporters with respect to phosphate rather than arsenate; and 2) a detoxification mechanism including a reduction in both arsenate and arsenite root efflux.

Conclusions

The As tolerance strategy of Kikuyu limits arsenate uptake and As translocation from roots to shoots; therefore, this plant cannot be considered a viable candidate for use in the phytoextraction of arsenic from contaminated soils or water.     

Adoption of environmental standards and a lack of awareness: evidence from the food and beverage industry in Vietnam

Environmental Economics and Policy Studies - Voluntary approaches to environmental policy can contribute to stemming environmental degradation in developing countries with weak institutions. We...     

The effect of EURO-0 vehicle substitution on polycyclic aromatic hydrocarbon and carbon monoxide concentrations in an urban area

From 1994 to 2003, daily air concentrations of particle-bound polycyclic aromatic hydrocarbons (PAHs) and carbon monoxide (CO) were regularly monitored at two traffic-oriented sampling sites (A and B) in urban Genoa, Italy. The data were used to estimate effects on air quality in real situations due to progressive substitution of EURO-0 vehicles, started in 1993, with less-polluting vehicles (EURO-1, EURO-2), mainly gasoline vehicles with a catalyst. PAH profile classification and diagnostic PAH ratios were used to identify 345 samples of predominantly traffic origin. At both sites, CO and PAH daily concentrations decreased exponentially with time and the apparent half-life values calculated were 6.3 and 5.5 for CO and 3.7 and 3.5 years for PAHs at sites A and B, respectively. At site A, monitored for traffic intensity, multiple regression analyses confirmed that daily PAH and CO concentrations were positively correlated with the number of non-catalytic vehicles estimated to cross this site during sampling and negatively correlated with seasonal variables (air temperature, ozone concentration, relative air humidity). The reduction in air pollution estimated for complete substitution of non-catalytic gasoline vehicles was 89% for BaP, 85% for total PAHs and 69% for CO.     

Gas-particle concentration and distribution of n-alkanes and polycyclic aromatic hydrocarbons in the atmosphere of Prato (Italy)

Air samples were collected in an urban and industrialised area of Prato (Italy) during 2002, as part of a study to identify and measure aliphatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs). Total concentrations of aliphatic hydrocarbons ranged between 170 and 282ngm(-3) in the gas phase and from 48.9 to 276ngm(-3) in the particulate phase. The average total PAH concentrations (gas+particulate) were 59.4+/-26.5ngm(-3), and both gas and particulate phase PAH concentrations decreased with increasing temperature. Source identification using diagnostic ratios and principal component analysis identified automobile traffic, in particular, the strong influence of diesel fuel burning, as the major PAH source. Gas-particle partition coefficients (K(p)'s) of n-alkane and PAHs were well correlated with the sub-cooled liquid vapour pressure (P(L)(0)) and indicate stronger sorption of PAHs to aerosol particles compared with n-alkanes.     

Remediation of heavy metals contaminated soils by ball milling

In the present work, the use of ball milling reactors for the remediation of lead contaminated soils was investigated. Lead immobilization was achieved without the use of additional reactants but only through the exploitation of weak transformations induced on the treated soil by mechanical loads taking place during collisions among milling media. The degree of metal immobilization was evaluated by analyzing the leachable fraction of Pb(II) obtained through the "synthetic precipitation leaching procedure". The reduction of leachable Pb(II) from certain synthetic soils, i.e., bentonitic, sandy and kaolinitc ones, was obtained under specific milling regimes. For example, for the case of bentonitic soils characterized by a Pb(II) concentration in the solid phase equal to 954.4 mg kg(-1), leachable Pb(II) was reduced, after 7 h of mechanical treatment, from 1.3 mg l(-1) to a concentration lower than the USEPA regulatory threshold (i.e., 0.015 mg l(-1) for drinkable water). Similar results were obtained for sandy and kaolinitic soils. X-ray diffraction, scanning electron microscopy, electron dispersive spectroscopy and granulometric analyses revealed no significant alterations of the intrinsic character of sandy and bentonitic soils after milling except for a relatively small increase of particles size and a partial amorphization of the treated soil. On the other hand, the mechanical treatment caused the total amorphization of kaolinitic soil. The increase of immobilization efficiency can be probably ascribed to specific phenomena induced by mechanical treatment such as entrapment of Pb(II) into aggregates due to aggregation, solid diffusion of Pb(II) into crystalline reticulum of soil particles as well as the formation of new fresh surfaces (through particle breakage) onto which Pb(II) may be irreversibly adsorbed.     

Biogas from the organic fraction of municipal solid waste: Dealing with contaminants for a solid oxide fuel cell energy generator

The present work investigates electricity production using a high efficiency electrochemical generator that employs as fuel a biogas from the dry anaerobic digestion of the organic fraction of municipal solid waste (OFMSW).The as-produced biogas contains several contaminants (sulfur, halogen, organic silicon and aromatic compounds) that can be harmful for the fuel cell: these were monitored via an innovative mass spectrometry technique that enables for in-line and real-time quantification.A cleaning trap with activated carbons for the removal of sulfur and other VOCs contained in the biogas was also tested and monitored by observing the different breakthrough times of studied contaminants.The electrochemical generator was a commercial Ni anode-supported planar Solid Oxide Fuel Cell (SOFC), tested for more than 300 h with a simulated biogas mixture (CH₄ 60 vol.%, CO₂ 40 vol.%), directly fed to the anode electrode. Air was added to promote the direct internal conversion of CH₄ to H₂ and CO via partial oxidation (POx).The initial breakthrough of H₂S from the cleaning section was also simulated and tested by adding ～1 ppm(v) of sulfur in the anode feed; a full recovery of the fuel cell performance after 24 h of sulfur exposure (～1 ppm(v)) was observed upon its removal, indicating the reliable time of anode exposure to sulfur in case of exhausted guard bed.     

Coastal dune systems and disturbance factors: monitoring and analysis in central Italy

This study describes the conservation status of dune systems in relation to disturbance factors in the coastal stretch of the Viterbo province, Latium Region, Italy. Particular emphasis was given to the bioindication value of plant communities and their sequence. Each plant community was considered as a "habitat" in accordance with Annex I of the Directive 92/43/EU. Stress factors, such as sand dynamic and erosion, and anthropogenic pressures, such as trampling and bathing settlements, influence the sequence of habitats and weaken the system of relations that makes these coenoses to occur in extreme conditions. The choice to carry out surveys along wide transects, recording different data, allowed to explore the use of habitats as bioindicators. Comparing sites characterized by the same extension in a homogeneous area, it was possible to expand the use of canonical correspondence analysis (CCA) as a tool to correlate habitat composition and disturbance factors. The application of CCA showed a high correlation of degradation and habitat loss with coastal erosion, trampling and presence of waste. Furthermore, floristic surveys allowed the application of different biodiversity indices to quantify species richness of sampled areas. The conservation status of the sites investigated was found to be diverse, from the total disappearance of the mobile dune habitats to their complete sequence. The proposed methodology has been useful to fulfill the objective of the work and is applicable to other case studies in the Mediterranean.