A new THOR shoulder design: a comparison with volunteers, the Hybrid III, and THOR NT

OBJECTIVE: Since the shoulders are rarely seriously injured in frontal or oblique collisions, they have been given low priority in the development of frontal impact crash test dummies. The shoulder complex geometry and its kinematics are of vital importance for the overall dummy kinematics. The shoulder complex also influences the risk of the safety belt slipping off the shoulder in oblique forward collisions. The first aim of this study was to develop a new 50th percentile male THOR shoulder design, while the second was to compare the new shoulder, mounted on a THOR NT dummy, with volunteer, THOR NT, and Hybrid III range of motion and stiffness data. The third aim was to test the repeatability of the new shoulder during dynamic testing and to see how the design behaves with respect to belt slippage in a 45 degrees far-side collision. METHODS: The new 50th percentile THOR shoulder design was developed with the aid of a shell model of the seated University of Michigan Transportation Research Institute (UMTRI) 50th percentile male with coordinates for joints and bony landmarks (Schneider et al., 1983). The new shoulder design has human-like bony landmarks for the acromion and coracoid processes. The clavicle curvature and length are also made similar to that of a male human, as is the range of motion in the anterior-posterior, superior-inferior, and medial-lateral directions. The new shoulder design was manufactured and tested under the same conditions that T?rnvall et al. (2005b) used to compare the shoulder range of motion for the volunteers, Hybrid III, and THOR Alpha. The new design was also tested in two dynamic test configurations: the first was a 0 degrees full-frontal test and the second was a 45 degrees far-side test. The dummy tests were conducted with an R-16 seat with a three-point belt, the Delta V was 27.0+/-0.5 km/h and the maximum peak acceleration was approximately 14.6+/-0.5 g for each test. RESULTS: A new shoulder design with geometry close to that of humans was developed to be retrofitted to the THOR NT dummy. The results showed that the range of motion for the new shoulder complex during static loading was larger by at least a factor of three, for the maximum load (200 N/arm), than that of either the Hybrid III or the THOR NT; this means it was more similar to the volunteers' range of motion. It was observed that the THOR NT with the new shoulder did not slide out of the shoulder belt during a far-side collision. The performance of the new shoulder was reasonably repeatable and stable during both the static tests and the sled tests. CONCLUSION: A new shoulder for the THOR NT has been designed and developed, and data from static range of motion tests and sled tests indicate that the new shoulder complex has the potential to function in a more human-like manner on the THOR dummy.     

Experimental determination of dust cloud deflagration parameters of selected hydrogen storage materials: Complex metal hydrides,chemical hydrides,and adsorbents

This paper discusses the results of an experimental program carried out to determine dust cloud deflagration parameters of selected solid-state hydrogen storage materials, including complex metal hydrides (sodium alanate and lithium borohydride/magnesium hydride mixture), chemical hydrides (alane and ammonia borane) and activated carbon (Maxsorb, AX-21). The measured parameters include maximum deflagration pressure rise, maximum rate of pressure rise, minimum ignition temperature, minimum ignition energy and minimum explosible concentration. The calculated explosion indexes include volume-normalized maximum rate of pressure rise (K_St), explosion severity (ES) and ignition sensitivity (IS). The deflagration parameters of Pittsburgh seam coal dust and Lycopodium spores (reference materials) are also measured. The results show that activated carbon is the safest hydrogen storage media among the examined materials. Ammonia borane is unsafe to use because of the high explosibility of its dust. The core insights of this contribution are useful for quantifying the risks associated with use of these materials for on-board systems in light-duty fuel cell-powered vehicles and for supporting the development of hydrogen safety codes and standards. These insights are also critical for designing adequate safety features such as explosion relief venting and isolation devices and for supplementing missing data in materials safety data sheets.     

Water Network Synthesis Using Mutation-Enhanced Particle Swarm Optimization

Different techniques for the synthesis of industrial water reuse/recycle networks have been developed in recent process integration research. These tools range from graphical pinch analysis approaches to mathematical programming models. The latter have the advantage of being flexible enough to incorporate various water network constraints, but in many cases these are often non-linear, thus making the identification of global optima difficult. Recent work has demonstrated the effectiveness of metaheuristic algorithms such as particle swarm optimization (PSO), for finding good solutions these problems. This work describes the use of a modified PSO for solving mixed integer non-linear programming (MINLP) models for water network synthesis. By incorporating a mutation operator for the binary variables in the model, the algorithm is able to escape sub-optimal network topologies and proceed towards better solutions than can be found with ordinary PSO. Two case studies involving water recycle/reuse are used to demonstrate the new design methodology.     

Characteristics of speeders

OBJECTIVE: To determine the characteristics of speeders, defined as drivers of vehicles traveling at least 15 mph above the posted speed limit and relatively faster than surrounding vehicles. METHODS: Vehicle speeds were recorded on 13 roads in Virginia with speed limits ranging from 40 to 55 mph. Speeders were compared with slower drivers, defined as drivers of adjacent vehicles traveling no more than 5 mph above the speed limit. License plates were used to identify vehicle owners; owners were inferred to have been driving if observed gender and estimated age matched those of the registered owner. For these drivers, information on exact driver age and gender, vehicle make and model, and driving record was obtained from the Virginia Department of Motor Vehicles. RESULTS: Five percent of the vehicles observed were traveling at least 15 mph above the limit, and 3% qualified as speeders, as defined in this study. Speeders were younger than drivers in the comparison group, drove newer vehicles, and had more speeding violations and other moving violations on their records. They also had 60% more crashes. DISCUSSION: Speeders are a high-risk group. Their speeding behavior is not likely to be controlled without vigorous, consistent enforcement, including the use of automated technology.     

Florida's weakened motorcycle helmet law: effects on death rates in motorcycle crashes

OBJECTIVES: Effective July 1, 2000, Florida's universal helmet law was amended to exclude riders ages 21 and older with insurance coverage providing at least 10,000 US dollars in medical benefits for injuries sustained in a motorcycle crash. Observed helmet use in Florida was reported to have declined from nearly 100% in 1998, before the law change, to 53% after. This study examined the effects of the law change on the likelihood of death, given involvement in a motorcycle crash. METHODS: Rates of motorcyclist deaths per crash involvement in Florida for 2001-2002 (after the law change) were compared with those for 1998-1999 (before the law change). Before/after death rate ratios (95% CIs) were examined, and logistic regression models estimated the effect of the helmet law change on the odds of death in a crash, while controlling for rider gender, age, and seating position, and number of vehicles. RESULTS: The motorcyclist death rate increased significantly after the law change, from 30.8 to 38.8 deaths per 1,000 crash involvements. Motorcyclist death rates increased for single- and multiple-vehicle crashes, for male and female operators, and for riders of all ages including those younger than 21. After controlling for gender and age, the likelihood of death given involvement in a motorcycle crash was 25% higher than expected after the law change. It is estimated that 117 motorcyclist deaths could have been avoided during 2001-2002 if Florida's universal helmet law had remained in place. CONCLUSIONS: This study provides evidence of the life-saving benefits of universal helmet laws. The results also suggest that age-specific helmet laws are not effective in protecting the youngest drivers. This is not surprising, as these laws are largely unenforceable.     

Aging and compressibility of municipal solid wastes

The expansion of a municipal solid waste (MSW) landfill requires the ability to predict settlement behavior of the existing landfill. The practice of using a single compressibility value when performing a settlement analysis may lead to inaccurate predictions. This paper gives consideration to changes in the mechanical compressibility of MSW as a function of the fill age of MSW as well as the embedding depth of MSW. Borehole samples representative of various fill ages were obtained from five boreholes drilled to the bottom of the Qizhishan landfill in Suzhou, China. Thirty-one borehole samples were used to perform confined compression tests. Waste composition and volume-mass properties (i.e., unit weight, void ratio, and water content) were measured on all the samples. The test results showed that the compressible components of the MSW (i.e., organics, plastics, paper, wood and textiles) decreased with an increase in the fill age. The in situ void ratio of the MSW was shown to decrease with depth into the landfill. The compression index, Cc, was observed to decrease from 1.0 to 0.3 with depth into the landfill. Settlement analyses were performed on the existing landfill, demonstrating that the variation of MSW compressibility with fill age or depth should be taken into account in the settlement prediction.     

Use of inert C&D materials for seawall foundation: quality control measures

The technical viability of using inert construction and demolition (C&D) materials for the construction of seawall and breakwater foundations has been established by laboratory testing of the materials, numerical analysis of foundation stability, and a pilot field-scale engineering performance evaluation. However, quality control measures are still required so that only suitable materials are used for seawall and breakwater foundation construction. The development of different quality control measures for different site conditions is presented in this paper. The rationale, practicality, and implementation of these quality control measures are also discussed.     

Leachability of municipal solid waste ashes in simulated landfill conditions

In Japan the volume of municipal solid waste is reduced by incineration, with fly ash and bottom ash disposed in controlled landfills. The leachability of anions and heavy metal cations, Zn, Cu and Pb, from MSW fly ash and bottom ash at different pHs was examined using batch- and column-leaching tests. The MSW ashes had a high capacity for neutralizing acids. Behaviour during leaching depended on the pH of the solution. For the volumes applied, the leachabilities of MSW fly ash were very similar at pHs from 3 to 6. Due to its amphoteric nature, Pb is leachable at pHs of approximately 10 or more, with leachate concentrations of about 3 and 3-10mg/L for the fly ash and bottom ash, respectively, much higher than for Zn and Cu. Pb concentrations for most leaching solutions were 1 and 3mg/L for the fly ash and bottom ash, respectively. Zn, and Cu leached at low concentrations for solutions of pH 3-6. Na and K ions leached at high concentrations of approximately 5000 mg/L in the first batch leaching test, decreasing to 10mg/L by the fourth leach. Ca and Mg ions leached more gradually than Na and K. Cl(-) and SO(4)(2+) ions were the major anions in the MSW ash. The high pH and cation leaching are expected to have negative impacts on the performance of clay liners.     

Effect of soil solids concentration in batch tests on the partition coefficients of organic pollutants in landfill liner-soil materials

 The effect of the soil solids concentration in batch tests on the measured values of the partition coefficient (K _p) of organic pollutants in landfill liner-soil material was investigated. Since this study was based on the results of batch and column tests conducted independently, there were limitations to the conclusions derived. The organic compounds tested were benzene, methylene chloride, toluene, trichloroethylene, and p-xylene. The results of this study showed that as soil solids concentrations increased, the measured K _p values of these organic compounds strongly decreased. The observed values of K _p stabilized when the soil solids concentration was above a certain value. Typical K _p values obtained from batch tests conducted under high soil solids concentrations were close to those obtained from column tests. It was concluded that the K _p values of organic compounds measured under low soil solids concentrations, i.e., less than 100 g/l, may not correctly simulate the field situation. Consequently, the values of K _p obtained with low soil solids concentrations can result in an overestimation of the retardation factor of the landfill liner material. Received: March 14, 2002 / Accepted: August 25, 2002