Influence of H2SO4 and ferric iron on Cd bioleaching from spent Ni–Cd batteries

The paper is concerned with biohydrometallurgical methods of cadmium recovery from spent Ni–Cd batteries. Cd leaching efficiency from electrode material in different media (H₂SO₄ and Fe₂(SO₄)₃ solutions), at different Fe(III) concentrations and using the bacteria Acidithiobacillus ferrooxidans were investigated. The main aim of this study was to understand which from the bioleaching products (sulphuric acid or ferric sulphate) play a main role in the bioleaching process of Cd recovery. The influence of Fe ions on Cd leachability was confirmed. The best leaching efficiency of Cd (100%) was reached by bioleaching and also by leaching in Fe₂(SO₄)₃ solution. The results of X-ray diffraction confirmed that no cadmium was present in solid residuum obtained after the Cd bioleaching as well as Cd leaching using solely ferric iron. The use of H₂SO₄ solution resulted in the lowest efficiency of Cd leachability, the presence of hydroxides in electrode materials caused neutralization of the leaching solution and inhibition of Cd leaching.     

Adsorption Air Cleaning From Ozone

Not much has been written about air cleaning from ozone. The aim of this paper was to demonstrate the possibility of adsorption air cleaning from ozone. The second aim was to investigate the dependence of the efficiency of ozone removal from the air on the height of the adsorber layer and on concentrations of ozone, and to obtain empirical formulas for calculating the efficiency of ozone treatment. Equipment for air cleaning from ozone and nitrogen and sulphur dioxides is suggested.     

From Natural Oils to Epoxy Resins: A New Paradigm in Renewable Performance Materials

The direct conversion of natural products to useful engineering materials is desirable from both economic and environmental considerations. We describe the synthesis and properties of 100?% oil-based epoxy resins generated from three epoxidized oils. The catalyst, tris(pentafluorophenyl)borane (B(C₆F₅)₃) in toluene, allowed for controlled cationic polymerization at a very low concentration. Epoxidized oils (derived from triolein, soybean, and linseed oil) had varying epoxy content, rendering resins of different cross-link density. The polymerization was carried out at room temperature followed by post-curing at elevated temperature to speed up conversion. Epoxy resins were amorphous transparent glasses below glass transitions and hard rubbers above. Despite their high cross-link density, these materials show relatively low T_g’s reflecting the aliphatic nature of fatty acids and the presence of plasticizing “dangling” chains. The structure of the triglyceride starting oils influenced the properties of the resulting materials: the more regular structure of triolein compared to the very heterogeneous structures of soybean and linseed oils seemed to have enhanced some properties of the polymer networks. These epoxy polymers are potentially useful as encapsulating and potting compounds for electronic applications.

     

An in-depth human health risk assessment of potentially toxic elements in highly polluted riverine soils,Příbram (Czech Republic)

Environmental Geochemistry and Health - Environmental pollution by potentially toxic element (PTE) and the associated health risks in humans are increasingly becoming a global challenge. The...     

Stable isotope and biochemical fractionation in the marine pelagic food chain: the jellyfish Pelagia noctiluca and net zooplankton

In our field study we analyzed the C and H isotopic and biochemical (C, N, P, protein, lipid, carbohydrate) composition of the jellyfish Pelagia noctiluca (collected from the Gulf of Trieste in 1985 to 1986) and its presumed diet-net zooplankton. The mean ¹³C (-18.8) and D (-58.4) ratios of P. noctiluca showed enrichment in heavy isotopes relative to net zooplankton (2 for carbon and 30 for hydrogen). Both the jellyfish and net zooplankton were characterized by a linear correlation between ¹³C and D. C. N, P, protein, lipid, and carbohydrate contents of P. noctiluca were low on a dry weight basis as compared to net zooplankton. Significantly lower C:N and C:P ratios were found in jellyfish indicating a greater loss of carbon relative to nitrogen and phosphorus along the passage to a higher trophic level. Isotopic and biochemical evidence indicate that, though collected in nearshore waters, P. noctiluca depended on autochthonous marine organic matter.     

Host genotype and age have no effect on rejection of parasitic eggs

Egg rejection belongs to a widely used host tactic to prevent the costs incurred by avian brood parasitism. However, the genetic basis of this behaviour and the effect of host age on the probability of rejecting the parasitic egg remain largely unknown. Here, we used a set of 15 polymorphic microsatellite loci, including a previously detected candidate locus (Ase64), to link genotypes of female great reed warblers (Acrocephalus arundinaceus), a known rejecter, with their egg rejection responses in two host populations. We also tested whether host female age, as a measure of the experience with own eggs, plays a role in rejection of common cuckoo (Cuculus canorus) eggs. We failed to find any consistent association of egg rejection responses with host female genotypes or age. It seems that host decisions on egg rejection show high levels of phenotypic plasticity and are likely to depend on the spatiotemporal variation in the parasitism pressure. Future studies exploring the repeatability of host responses towards parasitic eggs and the role of host individual experience with parasitic eggs would greatly improve our understanding of the variations in host behaviours considering the persistence of brood parasitism in host populations with rejecter phenotypes.     

Characteristics of black carbon aerosol mass concentration over the East Baltic region from two-year measurements

Continuous measurements of black carbon (BC) aerosol mass concentration were performed at a background site Preila (55°55'N, 21°00'E, 5 m a.s.l., Lithuania) during the period 2008-2009. The data were used to characterize the BC mass concentration distribution over the East Baltic region. High increase in aerosol BC concentration was associated with the change in air mass characteristics and biomass burning during the winter heating season and spring wildfires. Monthly means of BC concentration ranged from 212 to 1268 ng m(-3) and the highest hourly means of concentration were from 4800 to 6300 ng m(-3), predominantly in spring and winter months. During the October-April period the BC mass concentrations were about twice as high as those in the summertime. The BC diurnal pattern in winter was typically different from that in spring indicating the seasonal variation of the atmospheric boundary layer height. The weekday/weekend difference was not strongly pronounced because the BC concentrations in Preila are mainly affected by long-range transport or local sources. Typical periodicities caused by anthropogenic and meteorological influences have been identified using Fourier analysis. It was shown that domestic heating appears as a 365 day periodicity; traffic slightly contributes 5-7 day peaks in the spectrum and elevated long-range BC can be identified as characteristic peaks with periodicities in the range from 16 to 29 days.Temporal evolution and transport of BC aerosols were interpreted by the air mass backward trajectory analysis in conjunction with the examination of the wavelength dependence on the aethalometer data. Air masses originated from the North Atlantic Ocean and Scandinavia were favourable for lower BC concentrations (350 ng m(-3)), while the BC level associated with the Western Europe airflows was significantly higher (970 ng m(-3)). The mean values of ?ngstr?m exponent of the absorption coefficient (monthly means 1.45 ± 0.25 and 0.84 ± 0.50 over January and June, respectively) revealed that the BC concentration observed over the East Baltic is influenced by submicron sized particles as a result of incomplete biomass combustion during the winter season.     

Synthesis of batch water network for a brewery plant

This paper presents an industrial application of mixed-integer nonlinear programming (MINLP) models for the optimisation of a water network, which was initiated by an integral need for cleaner production within a brewery. Several mathematical models were developed in order to reduce the use of freshwater, whilst considering the specific requirements of each particular production section. These models are based on the design method developed by Kim and Smith [1]. The original formulation is modified to enable efficient integration of discontinuous and semi-continuous water-using processes in the packaging area. Semi-continuous processes are treated as water sources of limited capacity. The option of installing storage tanks for semi-continuous water streams is included in the model, in order to re-use these streams during the shutdown periods of semi-continuous operations. The original model is additionally extended with the option of installing local (on-site) wastewater treatment units operating either in batch or semi-continuous modes. This enables the analysing of opportunities for regeneration re-use within the production area, i.e. the brewhouse with a cellar, because of high contaminant concentrations at these sites. The scheduling of batch wastewater treatment units is performed simultaneously in order to adjust the treatment schedule to a fixed schedule of batch processes.