Fire and explosion assessment on oil and gas floating production storage offloading (FPSO): An effective screening and comparison tool

Fires and explosions have been identified as major potential hazards for Oil and Gas Floating Production Storage Offloading (FPSO) installations and pose risk to personnel, assets, and the environment. Current fire and explosion assessment (FEA) tools require physical effect modeling software and follows standards from API, ISO, and engineering practices. However, the tools are not specific to any particular system such as an FPSO, and do not provide comprehensive guidance for safety engineers to perform FEA.This paper discusses the development of a screening and comparison tool for FEA on FPSOs and the incorporation of an expert system into the tool. The results are computerized using MS Excel/VBA to provide a structured and comprehensive assessment on each equipment and module handling natural gas, crude oil, methanol and diesel on FPSO topsides.This tool features built-in calculations for jet and pool fire size estimation for gas/liquid releases, and the ability to perform Quantitative Risk Analysis (QRA) to specify the personnel and equipment risk for varying leak sizes and process conditions. Control and recovery measures are incorporated as an expert system based on report findings, engineering practices, and relevant standards. Bowtie analysis is applied in the tool to define detailed control and recovery measures for the FPSO based on the incident scenarios. An explosion assessment is performed by incorporating physical effect modeling software results.Unique features provided in the tool include fire and radiation contour mapping on an FPSO layout to help determine personnel and equipment risk more accurately and fire pump sizing that can be used to verify the amount of water deluge system required to mitigate fires and explosions. In addition, flexibility of data input (process data, failure rate data, etc.) and user interfaces assist safety engineers to screen and compare process alternatives, check design quality, and evaluate design options at any design stage.     

COMPARATIVE EVALUATION OF LAND COVER DATA SOURCES FOR EROSION PREDICTION1

ABSTRACT: A fundamental problem in protecting surface drinking water supplies is the identification of sites highly susceptible to soil erosion and other forms of nonpoint source (NPS) pollution. The New York City Department of Environmental Protection is trying to identify erodible sites as part of a program aimed at avoiding costly filtration. New York City's 2,000 square mile watershed system is well suited for analysis with geographic information systems (GIS); an increasingly important tool to determine the spatial distribution of sensitive NPS pollution areas. This study used a GIS to compare three land cover sources for input into the Modified Universal Soil Loss Equation (MUSLE), a model estimating soil loss from rangeland and forests, for a tributary watershed within New York City's water supply system. Sources included both conventional data (aerial photography) and Landsat data (MSS and TM images). Although land cover classifications varied significantly across these sources, location-specific and aggregate watershed predictions of the MUSLE were very similar. We conclude that using Landsat TM imagery with a hybrid classification algorithm provides a rapid, objective means of developing large area land cover databases for use in the MUSLE, thus presenting an attractive alternative to photo interpretation.     

Licensing resource tracts : A comparison of auction and discretionary systems

This paper uses simulations of a model of a company's decision about the maximum bid value and the optimal investment programme for a resource tract to compare the auction and discretionary systems of licence allocation. The modle includes uncertainty about the size of resource stock and the selling price of extracted resource, as well as risk aversion on the part of the company. It is concluded that an auction system provides the government both with better information about a company's perception of the value of a resource tract and with the potential for considerably higher revenue from its licensing.     

How shell cleaned up a 400,000-gallon oil spill

On April 23, 1988, approximately 9,500 barrels (400,000 gallons) of San Joaquin Valley crude oil leaked from an aboveground storage tank at Shell Oil Company's Martinez Manufacturing Complex in Martinez, California and entered Suisun Bay, an important recreation area. This article describes the remediation techniques Shell used to protect and clean up the Bay's oiled marshes, sloughs, rocky shores, marinas, and sandy beaches, and discusses the main methods of oil spill response, site-specific factors that must be considered in choosing remediation techniques, the interaction between Shell and government agencies, and the costs associated with the spill. The cleanup's total cost was approximately $8.3 million, which did not include private claims and claims handling costs; Shell also signed a separate consent decree for $19.75 million with the state of California and the federal government. This spill and its aftermath emphasize the need for preparation that facilitates response actions, improves the chances for cooperation between responsible parties and government agencies, minimizes the time needed for remediation, lowers cleanup costs, and limits natural resource damage claims and penalties.     

Convenience improves composting and recycling rates in high-density residential buildings

Increasing volumes of solid waste, implicated in environmental pollution and health problems, are central to the current environmental crisis. In two randomized field experiments, we demonstrate that convenience dramatically boosts recycling and composting rates in multi-family dwellings and university residences. When compost bins were placed on each floor in a multi-family residence, instead of on the ground floor, composting rates increased by 70%, diverting 27 kilograms of compost from the landfill per unit per year. When recycling stations were placed just meters from suites in student residences, instead of in the basement, recycling increased by 147% (container), and 137% (paper), and composting increased by 139%, diverting 23, 22, and 14 kilograms of containers, paper, and compost, respectively, from the landfill per person per year. Simply making recycling and composting convenient can significantly increase waste diversion, and as such this single intervention has important implications for waste management and environmental policy.     

Why are larger convict cichlid (Cichlasoma nigrofasciatum) fry sometimes adopted into broods of smaller fry?

Females of Elasmucha grisea defend their eggs and small nymphs against invertebrate predators. Females sometimes guard their clutches side by side on the same birch leaf. We studied benefits of this joint guarding both in the field and in the laboratory. We found that adjacent females had significantly larger clutches than solitary females. In the laboratory, we studied the effectiveness of joint versus single defence against ant (Formica uralensis) predators. We established female pairs from initially singly guarding females by cutting off pieces of leaves with egg clutches and pasting them beside another female guarding her clutch. In the control group the females with their clutches were similarly cut off but these clutches were placed on another leaf without any female. The birch twigs where females guarded their clutches were placed in cages in close proximity to laboratory ant nests. In the experimental treatment, two females guarded their clutches together and at the same nest there was another birch twig without a female. In the control treatment two twigs with one female on each were placed close to another ant nest. Two females defended their clutches significantly more successfully, losing fewer eggs than did the single females. This primitive form of female sociality in parent bugs resembles colonial nesting in birds, where communal defence is also important. However, to our knowledge this is the first experiment where the benefit of joint guarding has been tested directly by manipulating the size of the breeding group rather than by measuring the risk of predation in groups of different size.     

Source apportionment and source/sink relationships of PAHs in the coastal atmosphere of Chicago and Lake Michigan

Multivariate statistical techniques were used to investigate source apportionment and source/sink relationships for polycyclic aromatic hydrocarbons (PAHs) in the urban and adjacent coastal atmosphere of Chicago/Lake Michigan in 1994–1995. The PAH signatures for the atmospheric particle phase, surface water particle phase and sediments indicate that atmospheric deposition is the major source of PAHs to the sediments and water column particulate phase of Lake Michigan. The PAH signature for the atmospheric gas phase and water dissolved phase indicate an intimate linkage between the lake and its overlying atmosphere. A modified factor analysis-multiple regression model was successfully applied to the source apportionment of atmospheric PAHs (gas+particle). Coal combustion accounted for 48±5% of the ΣPAH concentration in both the urban and adjacent coastal atmosphere, natural gas combustion accounted for 26±2%, coke ovens accounted for 14±3%, and vehicle emissions (gas+diesel) accounted for 9±4%. Each is an identified source category for the region. These results are consistent with the mix of fossil fuel combustion sources and ratios of indicator PAHs.     

Evaluation of the effects of acid precipitation in eastern Canada using the raison system

Evaluations have been made of the key chemical factors in the aquatic effects upon surface waters due to acidic precipitation in eastern Canada. The region of Canada east of the Manitoba/Ontario border was divided into 22 aggregates and assessments of inorganic and organic ion chemistry appraised relative to sulphate deposition rates and distributions. Aquatic sensitivity is largely dominated by the concentration, distribution and magnitude of SO _inf4 ^sup2- (sulphate) deposition and by the prevalent geology and derived soils found in each aggregate. The RAISON system provided an adaptable and highly flexible platform to evaluate interactively, multiple data sets of divergent characteristics. Attributes usually associated with geographical information systems are significantly augmented by quantitative numerical and stochastic capabilities that were used extensively in this study.     

Emissions of organic compounds and trace metals in fine particulate matter from motor vehicles: a tunnel study in Houston, Texas

Fine particulate matter (PM) samples collected in a highway tunnel in Houston, TX, were analyzed to quantify the concentrations of 14 n-alkanes, 12 polycyclic aromatic hydrocarbons, and nine petroleum biomarkers, as well as 21 metals, with the ultimate aim of identifying appropriate tracers for diesel engines. First, an exploratory multivariate dimensionality reduction technique called principal component analysis (PCA) was employed to identify all potential candidates for tracers. Next, emission indices were calculated to interpret PCA results physically. Emission indices of n-heneicosane, n-docosane, n-tricosane, n-tetracosane, n-pentacosane, fluoranthene, and pyrene were correlated highly and increased strongly with percentage carbon present in the tunnel emanating from diesel vehicles. This suggests that these organic compounds are useful molecular markers to separate emissions from diesel and gasoline engines. Additionally, the results are the first quantification of the metal composition of PM with aerodynamic diameters smaller than 2.5 microm (PM2.5) emissions from mobile sources in Houston. PCA of trace metal concentrations followed by emission index calculations revealed that barium in fine airborne particles can be linked quantitatively to diesel engine emissions, demonstrating its role as an elemental tracer for heavy-duty trucks.