A new urban boundary layer and dispersion parameterization for an emergency response modeling system: Tests with the Joint Urban 2003 data set

A new urban parameterization for a fast-running dispersion prediction modeling system suitable for emergency response situations is introduced. The parameterization represents the urban convective boundary layer in the dispersion prediction system developed by the National Atmospheric Release Advisory Center (NARAC) at Lawrence Livermore National Laboratory. The performance of the modeling system is tested with data collected during the field campaign Joint Urban 2003 (JU03), held in July 2003 in Oklahoma City, Oklahoma. Tests were performed using data from three intense operating periods held during daytime slightly unstable to unstable conditions. The system was run in operational mode using the meteorological data that would be available operationally at NARAC to test its effectiveness in emergency response conditions. The new parameterization considerably improves the performance of the original modeling system, by producing a better degree of pattern of correspondence between predictions and observations (as measured by Taylor diagrams), considerably reducing bias, and better capturing directional effects resulting in plume predictions whose shape and size better resemble the observations (via the measure of effectiveness). Furthermore, the new parameterization shows similar skills to urban modeling systems of similar or greater complexity. The parameterization performs the best at the three JU03 sensor arcs (1, 2, and 4 km downwind the release points), with fractional bias values ranging from 0.13 to 0.4, correlation values from 0.45 to 0.71, and centered root-mean-square error being reduced more than 50% in most cases. The urban parameterization has been tested with grid increments of 125, 250, 500 and 1000 m, performing best at 250 and 500 m. Finally, it has been found that representing the point source by a Gaussian distribution with an initial spread of particles leads to a better representation of the initial spread induced by near-source buildings, resulting in lower bias and improved correlation in downtown Oklahoma City.     

Linking Excess Nutrients,Light, and Fine Bedded Sediments to Impacts on Faunal Assemblages in Headwater Agricultural Streams1

Griffith, Michael B., F. Bernard Daniel, Matthew A. Morrison, Michael E. Troyer, James M. Lazorchak, and Joseph P. Schubauer‐Berigan, 2009. Linking Excess Nutrients, Light, and Fine Bedded Sediments to Impacts on Faunal Assemblages in Headwater Agricultural Streams. Journal of the American Water Resources Association (JAWRA) 45(6):1475‐1492. Abstract: Biological impairments in streams are typically defined by regulatory agencies in terms of altered invertebrate or fish assemblages. While nutrients, canopy cover, and sediment fines contribute to these impairments, these stressors are often defined, at least in part, by their impacts on periphyton. Path analysis can extend these assessments to impacts on invertebrates and fish by characterizing the direct and indirect relationships among variables along defined model pathways. With data from headwater tributaries in the Little Miami River, Ohio, we tested models of the impacts of nutrients [total nitrogen (TN), total phosphorus (TP), and the nitrogen to phosphorus (N/P) ratio], the percentage of (%) open canopy, and the % sand and fines on three periphyton metrics [periphytic ash‐free dry mass (AFDM), the percent abundance of cyanobacteria (% cyanobacteria), and the percent abundance of Chlorophyta (% Chlorophyta)] and, in turn, on selected invertebrate or fish metrics. Our objective was to develop and evaluate a statistical model that assesses the direct and indirect impacts of excess nutrients on macroinvertebrate and fish in these streams and demonstrate how this approach might be applicable elsewhere. The results suggest indirect pathways for the influences of nutrients, canopy cover, and fine bedded sediments on invertebrates or fish that are mediated by their influences on periphyton. This is in addition to any direct impacts of these stressors on the invertebrate and fish metrics. In most models, all three periphyton metrics increased with % open canopy. Periphytic AFDM increased with TN, while % cyanobacteria decreased. The % cyanobacteria also decreased with % sand and fines, but % Chlorophyta increased. The metrics, percent abundance of (%) three most dominant (macroinvertebrate) taxa, % Trichoptera, and % herbivorous fish all increased with periphytic AFDM, while % climbers, % swimmers, and %Lepomis cyanellus Rafinesque decreased. Lepomis cyanellus is an indicator species, because it is generally common in these streams and relatively tolerant to various common environmental stressors. The % three most dominant macroinvertebrate taxa increased while % Hydropsychidae (Trichoptera) and %L. cyanellus decreased with % cyanobacteria. The % Trichoptera and %L. cyanellus increased with % Chlorophyta. Some macroinvertebrate metrics, such as the % burrowers and number of burrower taxa, did not have any statistically significant relationships with the periphyton metrics but did exhibit a direct pathway with % sand and fines. These analyses illustrate how path analysis can be used to estimate the relationships among the variables in a conceptual model, modify the model, assess the relative importance of different paths, and explore responses resulting from stressors with interacting and indirect impacts.     

Does the built environment affect when American teens become drivers? Evidence from the 2001 National Household Travel Survey

Problem

Motor vehicle crashes are the most common cause of death for American adolescents. However, the impact of where teens live on when they begin driving has not been studied.

Method

Data from the 2001 National Household Travel Survey were used to estimate the effect of residential density on the driver status of teens aged 16 to 19 years after matching on demographic characteristics.

Results

Controlling for demographic characteristics, 16 and 17 year old teens in high density neighborhoods had driver rates 15 percentage points below teens living in less dense areas (p < 0.001). The effect for 18 and 19 year olds was a 9 percentage point decrease (p < 0.001).

Summary

These results suggest teens living in less dense and more sprawling communities initiate driving at a younger age than comparable teens in compact areas, placing them at increased risk for crash related injuries. Impact on Industry: The role of environmental factors, such as neighborhood walkability and provision of transit, should be considered in young driver programs.     

The politics of NGO registration in international protectorates: the cases of Bosnia and Iraq

Following international interventions in Bosnia-Herzegovina(1) and Iraq, non-governmental organisations (NGOs) have played a central role in delivering humanitarian relief, encouraging participation in new systems of government, and advocating on behalf of marginalised groups. Although intervening agencies have framed such autonomous organisations as unquestionably virtuous, scholars have increasingly questioned the agency of NGOs, pointing to the constraining effects of funding and regulatory mechanisms. This paper contributes to this body of work by offering a detailed examination of legislation requiring NGOs to register with nascent state institutions. Drawing on case study material from Bosnia and Iraq, it argues that NGO registration should not be dismissed as a technical or legal matter, but that it should be embraced as a significant political practice embedded in relations of power. Registration legislation has increased the transparency of NGO funding origins and institutional practices, yet it has simultaneously acted as a barrier to smaller organisations and led to the transmission of international objectives through civil society entities.     

Metabolism of chlorinated biphenyls: use of 3,3'- and 3,5-dichlorobiphenyl as sole sources of carbon by natural species of Ralstonia and Pseudomonas

Ralstonia sp. SA-3, Ralstonia sp. SA-4 and Pseudomonas sp. SA-6 are natural strains with a novel capacity to utilize meta-substituted dichlorobiphenyls (diCBs) hitherto not known to serve as a sole source of carbon and energy for polychlorobiphenyl-degraders. In growth experiments, axenic cultures of isolates grew logarithmically on 3,3'-diCB with generation times that ranged insignificantly (t-test, P>0.05) from 30.4 to 33.8 h. Both 3-chlorobenzoate (3-CBA) and chloride produced as metabolites were recovered in non-stoichiometric quantities. The release of chloride by the cultures lagged substantially, indicating that the initial dioxygenase attack preceded cleavage of carbon-chloride bonds and that chloride must have been released from the chlorinated hydroxypentadienoate. In the case of 3,5-diCB, SA-3 and SA-6 metabolised this substrate primarily to 3,5-CBA. The lack of chloride in the culture media coupled with stoichiometric recovery of 3,5-CBA suggests that growth by these strains occurred predominantly at the expense of the unsubstituted phenyl ring. The unique metabolic properties of these three aerobic isolates point to their potential usefulness as seeds for bioremediation of PCBs polluted environments without the need for repeated inoculation or supplementation by a primary growth substrate such as biphenyl.     

Role of protein, amino acids, and enzyme activity on odor production from anaerobically digested and dewatered biosolids.

The main objective of this research was to test the hypothesis that bioavailable protein and, more specifically, the sulfur-containing amino acids within the protein, can be degraded by proteolytic enzymes to produce odor-causing compounds--mainly volatile sulfur compounds (VSCs)--during biosolids storage. To achieve these objectives, samples of digester effluent and cake solids were collected at 11 different wastewater treatment plants in North America, and the samples were analyzed for protein and amino acid content and general protein-degrading enzyme activity. At the same time, cake samples were stored using headspace bottles, the concentration of VSCs were measured using gas chromatography, and olfactometry measurements were made by a trained odor panel. The results showed that the bound cake protein content and methionine content was well-correlated with VSC production and the detection threshold measured by the odor panel.     

Production of Nephrops norvegicus larvae in the Irish Sea

Plankton survey data from 1982, 1985 and 1995 were used to estimate the annual production of Nephrops norvegicus (L.) larvae in the Irish Sea. The larval abundance data from each set of surveys were analysed using the same temperature-to-stage-duration relationships. The production of larvae was similar in all 3?yr at approx. 360?×?10⁹ Stage I larvae per year. The estimated production in the eastern Irish Sea was 5% of the value for the western Irish Sea. This corresponded well to the sizes of the fisheries and the relative areas of the mud patches. Larvae in both areas were found to hatch over 5½?wk, centred on the first week in May. The time lag between onset of production of each stage reflected the estimated stage durations, but the lag between maximum production of each stage was much shorter than expected.     

Comparison of in vivo and in vitro methodologies for the assessment of arsenic bioavailability in contaminated soils

An in vivo swine assay was utilised for the determination of arsenic (As) bioavailability in contaminated soils. Arsenic bioavailability was assessed using pharmacokinetic analysis encompassing area under the blood plasma-As concentration time curve following zero correction and dose normalisation. In contaminated soil studies, As uptake into systemic circulation was compared to an arsenate oral dose and expressed as relative As bioavailability. Arsenic bioavailability ranged from 6.9+/-5.0% to 74.7+/-11.2% in 12 contaminated soils collected from former railway corridors, dip sites, mine sites and naturally elevated gossan soils. Arsenic bioavailability was generally low in the gossan soils and highest in the railway soils, ranging from 12.1+/-8.5% to 16.4+/-9.1% and 11.2+/-4.7% to 74.7+/-11.2%, respectively. Comparison of in vivo and in vitro (Simplified Bioaccessibility Extraction Test [SBET]) data from the 12 contaminated soils and bioavailability data collected from an As spiked soil study demonstrated that As bioavailability and As bioaccessibility were linearly correlated (in vivo As bioavailability (mgkg(-1))=14.19+0.93.SBET As bioaccessibility (mgkg(-1)); r(2)=0.92). The correlation between the two methods indicates that As bioavailability (in vivo) may be estimated using the less expensive, rapid in vitro chemical extraction method (SBET) to predict As exposure in human health risk assessment.     

Methyl bromide as a building disinfectant: interaction with indoor materials and resulting byproduct formation

Several buildings were contaminated with Bacillus anthracis in the fall of 2001. These events required consideration of how to disinfect large indoor spaces for continued worker occupation. The interactions of gaseous disinfectants with indoor materials may inhibit the disinfection process, cause persistence of the disinfectant, and lead to possible byproduct formation and persistence. Methyl bromide (CH3Br) is a candidate for disinfection/deactivation of biological agents in buildings. In this study, 24 indoor materials were exposed to CH3Br for 16 hr at concentrations ranging from 100 to 2500 ppm in 48-L electropolished stainless steel chambers. CH3Br concentrations were measured during and after disinfection. Its interactions with materials were observed to be small, with nearly complete and rapid desorption. Between 3% and 8% of CH3Br adsorbed to four materials (office partition, ceiling tile, particle-board, and gypsum wallboard with satin paint), and the degree of adsorption decreased with increasing relative humidity. The percentage of adsorption to all other materials was <2%. This result suggests that when designing disinfection events with CH3Br, loss to indoor materials can be neglected in terms of disinfectant dose calculations. Possible reaction products were identified and/or quantified before and after exposure to CH3Br. Several monomethylated and dimethylated aliphatic compounds were observed in chamber air at low concentrations after the exposures of six materials to CH3Br. Concentration increases also occurred for chemicals that were observed to naturally off-gas from materials before exposure to CH3Br, suggesting that CH3Br may play a role in enhancing the natural off-gassing of chemicals, for example, by competitive displacement of compounds that already existed in the materials. The results described in this paper should facilitate the design of building disinfection systems involving CH3Br.     

Modeling dispersion from toxic gas released after a train collision in Graniteville, SC

The Savannah River National Laboratory (SRNL) Weather Information and Display System was used to provide meteorological and atmospheric modeling/consequence assessment support to state and local agencies after the collision of two Norfolk Southern freight trains on the morning of January 6, 2005. This collision resulted in the release of several toxic chemicals to the environment, including chlorine. The dense and highly toxic cloud of chlorine gas that formed in the vicinity of the accident was responsible for 9 fatalities and caused injuries to more than 500 others. Transport model results depicting the forecast path of the ongoing release were made available to emergency managers in the county's Unified Command Center shortly after SRNL received a request for assistance. Support continued over the ensuing 2 days of the active response. The SRNL also provided weather briefings and transport/consequence assessment model results to responders from the South Carolina Department of Health and Environmental Control, the Savannah River Site (SRS) Emergency Operations Center, Department of Energy headquarters, and hazard material teams dispatched from the SRS. Operational model-generated forecast winds used in consequence assessments conducted during the incident were provided at 2-km horizontal grid spacing during the accident response. High-resolution Regional Atmospheric Modeling System (RAMS, version 4.3.0) simulation was later performed to examine potential influences of local topography on plume migration in greater detail. The detailed RAMS simulation was used to determine meteorology using multiple grids with an innermost grid spacing of 125 m. Results from the two simulations are shown to generally agree with meteorological observations at the time; consequently, local topography did not significantly affect wind in the area. Use of a dense gas dispersion model to simulate localized plume behavior using the higher-resolution winds indicated agreement with fatalities in the immediate area and visible damage to vegetation.