Deposition fluxes of PCDD/Fs in the area surrounding a steel plant in northwest Italy

The paper aims at investigating the contribution of a steel plant located in a rural area in northwestern Italy (700,000 tons of steel/year) to the deposition fluxes of Polychorinated Dibenzo-p-dioxins and Polychorinated dibenzofurans (PCDD/PCDFs) at local level through the analysis of sampling data, literature data, and air dispersion model (AERMOD)output data. Total measured deposition fluxes of PCDD/PCDFs in three monitoring stations were consistent with other studies carried out in Italy in urban and suburban areas and in rural European areas; while these were lower than those measured in other European urban/suburban areas or in sites influenced by industrial sources. Furthermore, the measured fluxes were also compared with the pattern of PCDD/Fs in ambient air sampled at the same sites in a previous study. This comparison showed a similarity between air concentration and deposition patterns of the samples collected at the three monitoring stations and a clear distinction of these from the source. The study was completed with AERMOD simulations, conducted with a mass mean particle diameter of 0.5 μm, according to the particle size distribution of the samples collected at the source. AERMOD calculated deposition fluxes of two to three orders of magnitude lower than those measured in two monitoring points; while in the most distant monitoring station, the deposition fluxes were too low to be calculated by the model. The simulations confirmed that the most distant monitoring station was not subject to emissions from the steel plant. The analysis highlighted the limited influence of the source in the local PCDD/F deposition fluxes.     

Photochemistry and photoinduced toxicity of acifluorfen, a diphenyl-ether herbicide

Photochemistry studies can be helpful in assessing the environmental fate of chemicals. Photochemical reactions lead to the formation of by-products that can exhibit different toxicological properties from the original compound. For this reason the photochemical behavior of the herbicide acifluorfen (5-[2-chloro-4-(trifluoromethyl)phenoxy]-2-nitrobenzoic acid) in the presence of different solvents was studied. Photochemical reactions were carried out using a high-pressure mercury arc and a solar simulator. Kinetic parameters and quantum yields were determined. The identification of photoproducts was performed by mass spectrometry and [1H] nuclear magnetic resonance (NMR). Nitrofluorfen, hydroxy-nitrofluorfen, 2-chloro-4-(trifluoromethyl)phenol, 5-trifluoromethyl-5'-nitrodibenzofuran, and other derivatives were identified. The photochemical reactions were also carried out in the presence of either a singlet or a triplet quencher, and in the presence of either a radical initiator or a radical inhibitor. Substances used as inhibitors of the excited levels T1 and S1 showed that photodegradation of acifluorfen begins from a singlet state S1 through a pi,pi* transition. The role of free radicals in the photodegradation of acifluorfen was determined and a radical mechanism was proposed. Toxicity tests against Daphnia magna Strauss showed that acifluorfen was not toxic at a concentration of 0.1 mM; however, photoproducts formed after 36 h of UV exposure of the herbicide induced a remarkable toxicity to the test organism.     

Vietnamese Uplands: Environmental and Socio-Economic Perspective of Forest Land Allocation and Deforestation Process

Vietnam, in the ongoing transition to market economies, has to cope with high rural poverty and a dramatic process of forest loss and environment degradation, particularly in the mountainous regions. The government considers rural poverty as the main cause of environment degradation, associated with slash-and-burn cultivation and to an unclear definition of property rights on forest land. In 1993, the government launched a Forest Land Allocation programme aiming to lease forest lands to individual households and, on this basis, to solve food security problems, halt the increasing environment degradation and preserve the remaining forests.To evaluate the results of this land reform policy, two upland pilot communes have been intensively monitored. The environmental and economic impacts of the forest land reform allocation in the two study areas are presented, after providing a background on the Vietnamese situation of mountain zones. On the basis of these findings, it is discussed as to whether the current forest land allocation process may actually promote local development and natural resources conservation, and under what conditions. Deforestation problems must be tackled also with new macroeconomic policies (e.g. credit programmes to support sustainable agriculture practices) and social policy (e.g. reduction of demographic pressure), together with the reform of the State institutions (e.g. State Forest Enterprises) involved in management of the forest areas.     

Life cycle assessment of a domestic cooker hood

A life cycle assessment (LCA) of a domestic cooker hood was conducted. Cradle-to-grave analysis was performed using the GaBi software with Eco-Indicator 99 (Egalitarian Approach). The most polluting phases were “manufacturing” and “use”, the environmental impact being affected especially by production materials and the electricity consumed during the product’s lifespan. The study also highlighted that the hood’s environmental impact is closely related to the local power grid mix. This aspect was further analyzed by entering the data for operating it both in Italy and in France. Finally, the improvements obtained by replacing the single-phase electrical motor with an inverter-driven three-phase induction one and the halogen lamps with Light Emitting Diode (LED) lamps were assessed with the LCA. These changes entail an improvement of the environmental impact of 36% in Italy and of 24% in France.     

The legacy of large dams in the United States

The sustainability of large dams has been questioned on several grounds. One aspect that has been less explored is that the development of dams and reservoirs often enables agricultural expansion and urban growth, which in turn increase water consumption. As such, dam development influences, while being influenced by, the spatial and temporal distribution of both supply and demand of water resources. In this paper, we explore the interplay between large dams, patterns of population growth and agricultural expansion in the United States over the past two centuries. Based on a large-scale analysis of spatial and temporal trends, we identify three distinct phases, in which different processes dominated the interplay. Then, we focus on agricultural water use in the Southwest region (Arizona, California and Nevada) and explore chicken-and-egg dynamics where water supply partly meets and partly fuels water demand. Lastly, we show that the legacy of dams in the United States consists of a lock-in condition characterized by high levels of water consumption, especially in the Southwest, which leads to severe water crises and groundwater overexploitation when droughts occur.     

Toxicity of tire debris leachates

Data on the indicators of environmental impact of tire debris, originated from the tire abrasion on roads, are extremely scarce, while it is well known that tires may produce deleterious effects. Tire debris contains significant quantities of zinc (Zn) which may be released by tire rubber. We have used tire particles (TD) produced in laboratory from new rubber. Two sets of experiments were set up to obtain eluates. One set used 50 and 100 g/L TD to produce eluates at pH 3-7. The Zn quantity was measured with a Inductively Coupled Plasma-Atomic Emission Spectrometry. The eluates at 1%,10%,50%,100% concentrations in culture media were tested on Raphidocelis subcapitata, Daphnia magna and Xenopus laevis embryos (FETAX test). The other set of experiments was performed putting 250 mg/L TD in a column with glass beads to control particle dispersion during the elution process. We demonstrate that factors such as pH, size and particles aggregation deeply influence the elution process, that the amount of Zn leached from particles is related to their aggregation rather than their quantity. These results, even though do not reflect the real environmental toxicity of the leachates, can be successfully used for comparative purposes allowing an initial assessment of the potential effect of tire derived particles.     

Pollution historical trends as recorded by sediments at selected sites of the Venice Lagoon

Polychlorinated biphenyls (PCBs), dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs) and hexaclorobenzene (HCB) were determined in three sediment cores of the Venice Lagoon: I1, from the San Giuliano Canal that is likely the main source of pollutants for the study area; E, representing the lagoon sediment of the zone of Campalto; and M3, typical of a salt marsh environment and mostly subject to atmospheric inputs. Maximum concentrations were found in core I1: 25-1858 ngI-TE kg(-1) (PCDD/Fs), 1.7-13 microg kg(-1) (HCB), and 107-717 microg kg(-1) (PCBs) are surficial and peak values, respectively. The lagoon sediment (E), is much less contaminated: 24-47 ngI-TE kg(-1) for PCDD/Fs, 2.3-3.6 microg kg(-1) for HCB, and 56-203 microg kg(-1) for PCBs, whereas M3 shows the lowest values: 1.6-6.0 ngI-TE kg(-1) for PCDD/Fs, 0.3-0.6 microg kg(-1) for HCB, and 7.1-39 microg kg(-1) for PCBs. In any case, the recent trend is toward a decrease of pollutant concentration. The chronology of cores E and M3 is based on both 210Pb and 137Cs activity-depth profiles. The maximum concentrations of PCDD/Fs, HCB, and PCBs correspond to the years 1949, 1980, and 1968, respectively. The homologue profiles of PCDD/Fs confirm that I1 has been subject to an industrial source while the other sites also recorded significant contributions, changing over time, of octachlorinated dioxin from combustion. A comparison of the pollutant inventories, all normalised to 210Pb inventories, suggests that the atmospheric contribution to the contamination of the area of Campalto is low: the upper limits range from 6% (PCDD/Fs) to 17% (HCB).     

The use of mosses as environmental metal pollution indicators

The possibility of using mosses as environmental indicators of metal pollution has been investigated. Mosses of the species Bryum argenteum were collected from different parts of Piedmont (Italy), ranging from highly polluted areas to nearly uncontaminated mountain areas. Periodical samplings were planned in every site on a monthly base, in order to check variations of metal uptake throughout one year; correlations with pluviometric and thermal patterns were investigated for all sampling stations. On every moss sample 20 elements, ranging from major (K, P, Al, Ca, Fe and Mg) to minor (Mn, Na, Ti and Zn) and trace (As, Ba, Cd, Co, Cr, Cu, Li, Ni, Pb and Sr), were quantitatively determined by inductively coupled plasma-atomic emission spectrometry or graphite furnace-atomic absorption spectrometry, depending on the needed sensitivity. Statistical analyses, carried out with principal component analysis and cluster analysis methods, revealed that a good correlation exists between metal content in mosses and pollution degree in the areas sampled.