Factors affecting overall satisfaction with a river recreation experience

Visitor satisfaction has been a consistently stated goal of outdoor recreation management. Recreation resource managers provide opportunities for the visiting public with the anticipation of satisfying the needs of the visitors. Management efforts are often evaluated in terms of visitor satisfaction. In the recent decade, a multiple satisfactions approach has been the primary research paradigm guiding visitor satisfaction research. This paradigm has focused primarily upon behavioral-type dimensions such as crowding, goal attainment, and resource impacts resulting from behavior. The purpose of this study was to examine the importance of a setting dimension relative to behavioral-type dimensions for explaining differences in visitor satisfaction. A sample of 895 river visitors were sent a questionnaire in the mail; 682 were returned for a 76.2% response rate. Regression analysis indicated the setting dimension was ranked as one of the most important dimensions for explaining differences in visitor satisfaction. Other dimensions considered included group behavior, perceived crowding, parking, past experience, encounters, use levels, and time waiting. Implications for management are discussed.     

Groundwater Impacts on Surface Water and Sediment—Gowanus Canal,Brooklyn, New York

The Gowanus Canal Superfund Site in Brooklyn, New York, is an approximately 1.5‐mile (1.61‐km) long estuary that was historically converted into a canal for industrial and commercial purposes. Three manufactured gas plants (MGPs) were formerly located on the Gowanus Canal and discharged waste into it. Surface sediments remain highly contaminated with polycyclic aromatic hydrocarbons (PAHs) long after the MGPs were razed. A hydrogeologic assessment indicates that groundwater passes through the deeper coal tar–contaminated sediment prior to discharging to the canal. This study was undertaken to investigate if groundwater passing through coal tar–contaminated sediment could be responsible for the ongoing contamination of both surface sediments and surface water in the canal. PAH compound distributions in surface water samples collected from the tidal canal at low tide were compared with PAH compounds found in adjacent groundwater‐monitoring wells, point sources (combined sewer overflows [CSOs]), and surface sediments. The results indicate a strong correlation between PAH contaminant distributions in groundwater, sediment, and surface water, indicating that contaminated groundwater passing through the deeper coal tar–contaminated sediments is the primary mechanism contributing to the contamination of both surface sediment and surface water in the canal. Therefore, any sediment remediation efforts in the Gowanus Canal that fail to evaluate and control the upward transport processes have a high chance of failure due to recontamination from below.  ©2016 Wiley Periodicals, Inc.     

Sea to land transfer of anthropogenic radionuclides to the North Wales coast, Part II: aerial modelling and radiological assessment

Modelling calculations have been performed to predict the radiological impact of the sea to land transfer pathway to members of the public in North Wales from 1952 to 2004. The radionuclides of interest were (99)Tc, (137)Cs, (239,240)Pu and (241)Am and the exposure routes considered were food consumption, external and inhalation. The consumption of locally grown terrestrial food in the early to mid 1980s was the most significant source of exposure to all of the groups considered, with (239,240)Pu being the radionuclide contributing most to the dose. A maximum dose of 1.46muSvy(-1) was calculated for adult members of the critical consumption group in 1985, with doses for 2004 reducing to 0.59muSvy(-1). Despite the conservative approach of the dose calculations, the dose rate values are very low, less than 0.15% of the annual limit of 1000muSvy(-1) for the UK public from controlled radiation sources (excluding medical).     

Polynuclear aromatic hydrocarbon contaminants in oysters from the Gulf of Mexico (1986-1990)

Polynuclear aromatic hydrocarbon (PAH) contaminant concentrations in 870 composite oyster samples from coastal and estuarine areas of the Gulf of Mexico analyzed as part of National Oceanographic and Atmospheric Administration's (NOAA's) National Status and Trends (NS&T) Mussel Watch Program exhibit a log-normal distribution. There are two major populations in the data. The cumulative frequency function was used to deconvolute the data distribution into two probability density functions and calculate summary statistics for each population. The first population consists of sites with lower PAH concentration probably due to background contamination (i.e. stormwater runoff, atmospheric deposition). The second population are sites with higher concentrations of PAHs associated with local point sources of PAH input (i.e. small oil spills, etc.). The temporal pattern for the mean concentration of the populations from the Gulf of Mexico is consistent with large-scale climatic factors such as the El Ni?o cycles which affect the precipitation regime.     

Source apportionment of airborne fine particulate matter in an underground mine

The chemical mass balance source apportionment technique was applied to an underground gold mine to assess the contribution of diesel exhaust, rock dust, oil mists, and cigarette smoke to airborne fine (<2.5 microm) particulate matter (PM). Apportionments were conducted in two locations in the mine, one near the mining operations and one near the exit of the mine where the ventilated mine air was exhausted. Results showed that diesel exhaust contributed 78-98% of the fine particulate mass and greater than 90% of the fine particle carbon, with rock dust making up the remainder. Oil mists and cigarette smoke contributions were below detection limits for this study. The diesel exhaust fraction of the total fine PM was higher than the recently implemented mine air quality standards based on total carbon at both sample locations in the mine.     

Review of environmental monitoring methods: survey designs

During the past decade and a half, environmental monitoring programshave increased in numberand importance. Large scale environmental monitoring programs often present design difficulties because they tend to measure many(sometimes hundreds) of parameters through space and time. Thispaper reviewed and summarized one important component of environmental monitoring programs, the statistical survey design. Survey designsused for long-term monitoring programs lasting multiple (3)occasions were reviewed, paying specialattention to those published after 1985. During this review, two key components of the overall survey design were identified. The first key component wasthe membership design. Groups of population units sampled the same occasionwere called panels here, and the membership design specified which units were members of which panels. The second component was the revisit design that specified when panels were to be revisited. Membership designs varied, butsome form of simple random or systematic design was popular.Among revisit designs, four basicpatterns were found in the literature and their relative strengths andweaknesses were summarized. To efficiently discuss revisit designs, anew unified short-hand notation was proposed and adopted.     

Porous organoclay composite for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Complex mixtures of hazardous chemicals such as polycyclic aromatic hydrocarbons (PAHs) in contaminated soil and groundwater can have severe and long-lasting effects on health. The evidence that these contaminants can cause adverse health effects in animals and humans is rapidly expanding. The frequent and wide-spread occurrence of PAHs in groundwater makes appropriate intervention strategies for their remediation highly desirable. The core objective of this research was to assess the ability of a clay-based composite to sorb and remove toxic contaminants from groundwater at a wood-preserving chemical waste site. Treatment efficiencies were evaluated using either effluent from an oil-water separator (OWS) or a bioreactor (B2). The effluent water from these units was passed through fixed bed columns containing either an organoclay composite or granular activated carbon. The sorbent columns were placed in-line using existing sampling ports at the effluent of the OWS or B2. Individual one-liter samples of treated and untreated effluent were collected in Kimax bottles over the course of 78 h (total of 50 samples). Subsequently each sample was extracted by solid phase extraction methodology, and pentachlorophenol (PCP) and PAH concentrations were quantitated via GC/MS. Columns containing porous organoclay composite, i.e. sand-immobilized cetylpyridinium-exchanged low-pH montmorillonite clay (CP/LPHM), were shown to reduce the contaminant load from the OWS effluent stream by 97%. The concentrations of benzo[a]pyrene (BaP) and PCP were considerably reduced (i.e. >99%). An effluent stream from the bioreactor was also filtered through columns packed with composite or an equivalent amount of GAC. Although the composite reduced the majority of contaminants (including BaP and PCP), it was less effective in diminishing the levels of lower ring versus higher ring PAHs. Conversely, GAC was more effective in removing the lower ring PAHs, except for naphthalene and PCP. The effectiveness of sorption of PCP from the OWS effluent by the composite was confirmed using a PCP-sensitive adult hydra bioassay previously described in our laboratory. The findings of this initial study have delineated differences between CP/LPHM and GAC for groundwater remediation, and suggest that GAC (instead of sand) as the solid support for organoclay may be more effective for the treatment of contaminated groundwater under field conditions than GAC or CP/LPHM alone. Further work is ongoing to confirm this conclusion.     

Understanding non-industrialized workers' approaches to safety: How do commercial fishermen “stay safe”?

BACKGROUND: Commercial fishing is carried out worldwide, often in non-industrialized forms, and is associated with high rates of fatal and non-fatal occupational injury. PROBLEM: Fishermen who work independently in non-industrialized settings do not have access to union or industry sponsored safety services and must make their own decisions about safety practices. Learning the meaning of safety for them and the safety measures they employ is important before developing interventions. METHODS: Two fieldworkers conducted in-depth ethnographic interviews with 31 commercial fishermen in North Carolina. Interviews and fieldnotes were analyzed using QSR N5. RESULTS: Fishermen primarily related staying safe to work practices and attitudes. They identified specific safety measures, appropriate gear and boat maintenance, weather decisions, and working cooperatively when ocean fishing. DISCUSSION: The ethnographic research process can produce information about a group's norms of preventive behavior and safety concerns. Knowledge of workers' concepts and practices will inform researchers' inquiries.     

Occupational stressors identified by small-scale,independent commercial crab pot fishermen

IntroductionWe interviewed fishermen to identify jobs and/or tasks of concern in order to guide and inform current ergonomic interventions.MethodsWe administered surveys to two groups of southeastern US commercial crab fishermen: a cohort contacted by telephone and fishermen recruited at 11 local fish houses. Fishermen were asked to rate physical stress of selected work tasks and conditions on a scale from 0 (no problem) to 10 (major problem). Fishermen were also asked open-ended questions about other work-issues of concern.ResultsFishermen who completed the survey (n = 91) were predominantly male (90%), white (96%), and over 40 years of age (71%). The five most physically strenuous tasks and conditions as rated by fishermen were pulling pots by hand (mean 6.4), rough weather (6.1) or rough water (6.2), unloading without mechanical assistance (5.8), and long work days (5.3). Task stress ratings with the most variability measured by the inter-quartile range (IQR) included: pulling pots by hand (IQR = 5), unloading without mechanical assistance (IQR = 5), gear maintenance (IQR = 4.5), and moving boxes and baskets on board (IQR = 4.5). Other situations that fishermen identified as a problem included: economic, off-shore work, declining industry, mental stress, environment, regulation, conflict with other commercial or recreational fishermen, issues with crew, sun (glare or burn), and breaking up frozen bait.ConclusionsIn general, stressful tasks identified from previous research were rated similarly by the fishermen surveyed. Development and testing of ergonomic interventions is ongoing.