Gas-phase reaction of CCl2F2 (CFC-12) with methane

Gas-phase reaction of CFC-12 (CCl2F2) with methane was carried out in a plug flow reactor over the temperature range of 873-1123 K. The major organic halocarbons formed during the reaction were C2F4, C2H2F2, CHClF2, CH3Cl, C3H2F6 and CCl3F. The formation of all products except C2H2F2 decreased with temperature, while the selectivity to C2H2F2 (difluoroethylene) increased with temperature and reached approximately 80% at 1123 K. Under these reaction conditions, methane acts as hydrogen and carbon source, resulting in the formation of an unsaturated C2 hydrofluorocarbon from two C1 precursors.     

Nonequilibrium sorption of phenols onto geosorbents: the impact of pH on intraparticle mass transfer

While the pH effect on sorption equilibrium of weak acids on natural sorbents was investigated in a number of studies, less is known about the pH dependence of sorption kinetics. This paper investigates the impact of pH on sorption kinetics during the transport of some selected phenols through a sandy aquifer material. Breakthrough curves measured in column experiments were analyzed using a mass transfer based nonequilibrium model designated as dispersed flow, film and particle diffusion model (DF-FPDM). In this model, the rate limiting intraparticle diffusion is characterized by the mass transfer coefficient, kSaV, which can be determined from breakthrough curves by curve fitting. The experimental results indicate that the kSaV is pH-dependent and inversely correlated with the pH-dependent distribution coefficient, K(d,app). Regression equations are presented that may be used to estimate approximate values of intraparticle mass transfer coefficients on the basis of experimentally determined or LFER predicted distribution coefficients.     

A framework for assessing vulnerability of inland fisheries to impacts of climate variability in India

In recent years climate variability has threatened the sustainability of inland fisheries and dependent fishers in India. Systematic methodology to assess the vulnerability of the fisheries sector to climate variability is currently not available. Towards this end, the present work deals with the assessment of inland fisheries vulnerability to climate variations in 13 districts of West Bengal state in India. For this purpose, a composite vulnerability index (0.0–1.0) has been developed on the basis of functional relationships amongst sensitivity, exposure and adaptive capacity using 19 indicators related to inland fisheries. The data obtained reflected different spatial combinations of climate exposure, sensitivity and adaptive capacity among the districts. Five districts were highly vulnerable which was attributable to low adaptive capacity of the fishers which played an important role in altering the spatial pattern of vulnerability among the districts. Thus our research will provided an important basis for policy makers to develop appropriate adaptation strategies to minimize the risk of fisheries sector to climate variability.     

Techno-environmental risks and ecological modernisation in “double-risk” societies: reconceptualising Ulrich Beck’s risk society thesis

By utilising a relatively underused framework developed by Maurie J. Cohen (1997. Risk society and ecological modernisation alternative visions for post-industrial nations. Futures, 29 (2), 105–119), this theoretical paper joins two of the most debated theories of environmental politics – ecological modernisation (EM) and Ulrich Beck’s risk society thesis – into a unified framework and problematises some of their implicit assumptions to theoretically introduce the notion of a “double-risk” society. In addition, it explains the differences between the traditional “Risk Society” theorised by the German sociologist Ulrich Beck and the newly introduced concept of a “double-risk” society. The arguments put forward in this paper provide some fresh perspectives facilitating the study of the techno-environmental risks and other ecological problems faced by “double-risk” societies. Theoretically, this paper adds to both EM theory and the risk society thesis as the generalisability of their existing versions is limited precisely because they fail to address some important social changes at the global structural level.     

Consumption of heavy metal contaminated foods and associated risks in Bangladesh

This study investigated the magnitude of heavy metal contamination and determined the carcinogenic as well as non-carcinogenic risks associated with selected food consumption in Bangladesh. Commonly consumed varieties of rice, vegetables, and fish samples were analyzed to measure the concentrations of heavy metals such as cadmium, chromium, lead, arsenic, manganese, nickel, and zinc. These staple food items showed the greatest probabilities of heavy metal contamination in different phases of their production and marketing. Wide variations of metal concentrations were observed. Specifically, estimated daily intakes of arsenic and cadmium exceeded allowable daily intakes in all three food items. Toxicity scores of the metals were evaluated, and a comprehensive risk assessment was conducted to quantify the risks associated with the daily food consumption. Except for cadmium and lead in vegetables, all the contaminants present in each food item posed significant levels of carcinogenic risks up to 2.99?×?10^?3 compared to the EPA recommended carcinogenic risk level of 1.0?×?10^?6. Cadmium and arsenic intake due to rice consumption also posed unsafe levels of non-carcinogenic risks of 4.587 and 6.648, respectively, compared to the EPA recommended non-carcinogenic risk level of 1.0. Finally, a revised set of permissible limits was proposed for the heavy metals detected in the food items. Those permissible limits would ensure the risks associated with food consumption below the allowable carcinogenic and non-carcinogenic risk levels. Thus, this comprehensive approach would provide guidelines to formulate adequate control measures and regulatory limits of toxic metals in foods produced and marketed in Bangladesh.     

Detection and removal of microplastics in wastewater: evolution and impact

Environmental Science and Pollution Research - The pervasiveness of microplastics in aquatic ecosystems has become a major environmental issue in recent years. The gradual dumping of plastic...     

Rates of shoreline change along the coast of Bangladesh

Bangladesh, at the confluence of the sediment-laden Ganges and Brahmaputra Rivers, supports an enormous and rapidly growing population (>140 million in 2011), across low-lying alluvial and delta plains that have accumulated over the past few thousand years. It has been identified as one of the most vulnerable places in the world to the impacts of climate change and sea-level rise. Although abundant sediment supply has resulted in accretion on some parts of the coast of Bangladesh, others are experiencing rapid erosion. We report a systematic assessment of rates of shoreline change over a 20-year period from 1989 to 2009, using Landsat satellite images with pixel resolution of 30 m on the ground. A Band ratio approach, using Band-5 divided by Band-2, discriminated the water line on images that were largely cloud-free, adequately registered, and at comparable tidal stages. Rates of shoreline change were calculated for >16,000 transects generated at 50 m intervals along the entire mainland coastline (>1,100 km) and major islands, using the End Point Rate (EPR) method in the Digital Shoreline Analysis System (DSAS) extension in ArcGIS®. Erosion characterises most of the seaward margin of the Sundarbans in western Bangladesh. Retreat rates of up to 20 m/yr are typical, with little evidence that local devastation of the mangrove fringe by Cyclone Sidr in November 2007 had resulted in uncharacteristic long-term rates of retreat where it made landfall. Erosion exceeded accretion in the Barguna Patuakhali coastal zone, most of which eroded at up to 20 m/yr, but with truncation of the southern tip of the Patharghata Upazila at up to 100 m/yr. In Bhola, erosion at rates of up to 120 m/yr were observed along much of the coast, but in the Noakhali Feni coastal zone, similar rates of erosion were balanced by rapid accretion of the main promontory by more than 600 m/yr. Rates of change were more subdued in the Chittagong and Cox’s Bazar coastal zones of southeast Bangladesh. Islands in the Meghna estuary were especially dynamic; Hatiya Island accreted along some of its shoreline by 50 km² between 1989 and 2009, but lost 65 km² through erosion elsewhere, resulting in the island moving south. Similar trends were observed on adjacent islands. The overall area changed relatively little across the entire coastline over the 20-year period with accretion of up to 315 km², countered by erosion of about 307 km².     

Pollution control technologies for the treatment of palm oil mill effluent (POME) through end-of-pipe processes

Palm oil production is one of the major industries in Malaysia and this country ranks one of the largest productions in the world. In Malaysia, the total production of crude palm oil in 2008 was 17,734,441 tonnes. However, the production of this amount of crude palm oil results in even larger amounts of palm oil mill effluent (POME). In the year 2008 alone, at least 44 million tonnes of POME was generated in Malaysia. Currently, the ponding system is the most common treatment method for POME but other processes such as aerobic and anaerobic digestion, physicochemical treatment and membrane filtration may also provide the palm oil industries with possible insights into the improvement of POME treatment processes. Generally, open ponding offers low capital and operating costs but this conventional method is becoming less attractive because the methane produced is wasted to the atmosphere and the system can not be certified for Carbon Emission Reduction trading. On the other hand, anaerobic digestion of POME provides the fastest payback of investment because the treatment enables biogas recovery for heat generation and treated effluent for land application. Lastly, it is proposed herewith that wastewater management based on the promotion of cleaner production and environmentally sound biotechnologies should be prioritized and included as a part of the POME management in Malaysia for attaining sustainable development. This paper thus discusses and compares state-of-the-art POME treatment methods as well as their individual performances.     

Sea level extremes in the U.S.-Affiliated Pacific Islands—a coastal hazard scenario to aid in decision analyses

The objective of this study is to provide a perspective on the extremes of sea-level variability and predictability for the U.S.-Affiliated Pacific Islands (USAPI) on seasonal time-scales. Based on the Generalized Extreme Value (GEV) model, the L-moments method has been used to estimate the model parameters. The bootstrap method has been used to define the exceedance probability level of upper and lower bounds of the return periods at the 90% confidence interval. On the basis of these return calculations and expected extremes of high sea level, the seasonal maxima of sea level and the varying likelihood of extreme events have been estimated. For analyzing the predictability of the extremes of sea-level, a canonical correlation analysis (CCA) statistical model has been developed. Findings reveal that there is seasonal climatology of extreme events in the vicinity of USAPI that are variable on temporal and spatial scales. Some of the islands (Yap and Saipan) display considerably higher seasonal extremes than the others for 20 to 100 year return periods because of typhoon-related storm surges. These surges are likely to cause huge tidal large sea-level inundations and increased erosion to low-lying atolls/islands and result in considerable damage to roads, harbors, unstable sandy beaches, and other major infrastructures. Finally, the need for evaluating the extreme events and associated typhoons from a regional perspective has been stressed for coastal hazard management decision analyses in the USAPI.     

The transition of a line plume to round plume

Environmental Fluid Mechanics - Buoyant turbulent plumes are often categorized by their geometry and described as either round plumes, issuing from a point source, or line/planar plumes, issuing...