Risk assessment and chemical decontamination of an oxime carbamate insecticide (methomyl) from eggplant, Solanum melongena L.

Methomyl, S-methyl (EZ)-N-(methylcarbamoyloxy)thioacetimidate, is a systemic insecticide chosen for the management of shoot and fruit borer, Leucinodes orbonalis G. Codex Alimentarious Commission has proposed a maximum residue limit (MRL) of 0.2 mg kg^???1 of methomyl, and there is a need to validate this value on eggplant. First + first-order model can explain the nonlinear dissipation pattern of methomyl conveniently in comparison to first-order kinetics. The preharvest intervals (PHI) of 27.3 and 35.3 days as obtained from first + first-order model for single and double doses would bring down the methomyl residue below MRL in actual practice. The respective half-lives were 6.6 and 7.8 days. On the other hand, first-order model suggests methomyl dissipated with a half-life value around 5 days and proposed PHIs of 6.57 and 8.57 days for single and double doses, which was far from reality. Hence, five different decontamination agents were chosen for the decontamination of methomyl from eggplant. Safety factors such as theoretical maximum daily intake and maximum permissible intake were used to evaluate risk assessment to human health. A 3-day waiting period for the both doses, following conventional agricultural practice and processing factor could not ensure sufficient margin of safety. Subjecting the data to a processing factor of 60% could not bring the residues below the proposed MRL by Codex. Methomyl is not found appropriate and effective for application in eggplant. Either the proposed MRL needs to be revised or good agricultural practice involving methomyl for plant protection in eggplant cultivation is questioned.     

Assessing spatio-temporal trend of vector breeding and dengue fever incidence in association with meteorological conditions

Th aim of this study is to investigate spatio-temporal trends of dengue vector breeding and epidemic (disease incidence) influenced by climatic factors. The spatio-temporal (low-, medium-, and high-intensity periods) evaluation of entomological and epidemiological investigations along with climatic factors like rainfall (RF), temperature (T_max), relative humidity (RH), and larval indexing was conducted to develop correlations in the area of Lahore, Pakistan. The vector abundance and disease transmission trend was geo-tagged for spatial insight. The sufficient rainfall events and optimum temperature and relative humidity supported dengue vector breeding with high larval indices for water-related containers (27–37%). Among temporal analysis, the high-intensity period exponentially projected disease incidence followed by post-rainfall impacts. The high larval incidence that was observed in early high-intensity periods effected the dengue incidence. The disease incidence had a strong association with RF (r = 0.940, α = 0.01). The vector larva occurrence (r = 0.017, α = 0.05) influenced the disease incidence. Similarly, RH (r = 0.674, α = 0.05) and average T_max (r = 0.307, α = 0.05) also induced impact on the disease incidence. In this study, the vulnerability to dengue fever highly correlates with meteorological factors during high-intensity period. It provides area-specific understanding of vector behavior, key containers, and seasonal patterns of dengue vector breeding and disease transmission which is essential for preparing an effective prevention plan against the vector.     

Farmers’ attitude toward treated sludge use in the villages of West Bank,Palestine

An application of treated sewage sludge on agricultural land has been widely accepted, as this method is simple and economical for disposal of wastewater residues. When applied properly on an agricultural land, sludge can replenish organic matter and nutrients in soil. Although sewage sludge has been used in agriculture in many parts of the world, its acceptability varies with different cultures and beliefs among farmers. Farmers’ concerns on sludge use are primarily due to its anthropogenic origin, pollutants that it carries, a general perception of sewage being dirty, and its offensive odor. This paper aims to investigate farmers’ perceptions on land application of treated sewage sludge on their farm. This study targeted two farming communities, namely, Anza and Beit Dajan villages, located in Jenin and Nablus districts in the West Bank, Palestine. In this study, a sample of 106 farmers were randomly selected and surveyed through a mixture of structured and open-ended questions. Results indicated that, overall, farmers have positive perceptions on land application of sludge. A majority of the farmers are in favor of the concept of sludge use when a planned wastewater treatment plant is constructed and it becomes operational. Results also indicate that a majority of the farmers are in favor of using sludge for fertilizing fruit trees, rather than growing vegetables and other plants in a greenhouse, and that many of them have knowledge of sludge properties and advantages and disadvantages of sludge use in agriculture. Despite the positive perceptions by the majority of farmers, a small fraction of the farmers are in disfavor of the use of sludge for the following reasons: psychological and social concerns, potential health risks, and their religious beliefs. Results further suggest that the land application of treated sewage sludge can be accepted by more farmers if the consumers are willing to buy agricultural products fertilized by sludge, sludge meets the public health requirements, and sludge is available at low costs. To improve farmers’ perceptions on the land application of sludge, several measures are recommended.     

Adsorption of methylene blue from aqueous solution by jackfruit (Artocarpus heteropyllus) leaf powder: A fixed-bed column study

Continuous fixed-bed studies were undertaken to evaluate the efficiency of jackfruit leaf powder (JLP) as an adsorbent for the removal of methylene blue (MB) from aqueous solution under the effect of various process parameters like bed depth (5–10 cm), flow rate (30–50 mL/min) and initial MB concentrations (100–300 mg/L). The pH at point of zero charge (pH_PZC) of the adsorbent was determined by the titration method and a value of 3.9 was obtained. A FTIR of the adsorbent was done before and after the adsorption to find the potential adsorption sites for interaction with methylene blue molecules. The results showed that the total adsorbed quantities and equilibrium uptake decreased with increasing flow rate and increased with increasing initial MB concentration. The longest breakthrough time and maximum MB adsorption were obtained at pH 10. The results showed that the column performed well at low flow rate. Also, breakthrough time and exhaustion time increased with increasing bed depth. The bed-depth service time (BDST) model and the Thomas model were applied to the adsorption of MB at different bed depths, flow rates, influent concentrations and pH to predict the breakthrough curves and to determine the characteristic parameters of the column that are useful for process design. The two model predictions were in very good agreement with the experimental results at all the process parameters studied indicating that they were very suitable for JLP column design.     

Identification of PM10 Sources in a Mediterranean Island

Due to the dry Mediterranean climate in Cyprus, particulate matter is resuspended from soils and other surfaces. From November 2002 to August 2003, gravimetric PM₁₀ measurements were carried out at three characteristic sites (traffic, residential and rural). A significant seasonal trend with high winter concentrations was observed at the traffic site. Special events, e.g. long-range transport of Sahara dust storms, were recorded over traffic, residential and rural areas in the order of six to eight events per year, with a major frequency in summer and spring periods. This contributes to the increase of 24-h EU limit value exceedances for PM₁₀ at the three investigated sites. The origin of the PM₁₀ load was determined by enrichment factors based on analyses of the local soil deposition at the investigated sites. Furthermore, positive matrix factorisation modelling was applied to find the sources of PM₁₀. Results indicate that the major emission sources affecting the PM₁₀ load were mineral soil, sea salt, road dust, oil combustion, secondary pollutants and gasoline vehicles. The natural contribution (local mineral soil and sea salt) at the three sites was in the range of 7–9 μg m^?3 in PM₁₀. Besides the Sahara dust storms and natural background concentrations, the vehicular pollution was found as the largest contributor (12–14 μg m^?3) to PM₁₀ load at the traffic site.     

Transforming an open dump into a sanitary landfill: a development effort in waste management

Upgrading a crude dump site into a sanitary landfill is a very challenging task; Matuail landfill site in Dhaka posed just such a challenge. From the very beginning, the existing disposal site had been used for the crude dumping of solid wastes. All types of solid wastes were haphazardly disposed of all over the site. The existing drainage channels of the dumping ground were not operational due to blockage by indiscriminate waste dumping. A large amount of leachate oozing out from the waste mixed with storm water and made the site esthetically very displeasing and environmentally unsound. This adverse situation sometimes caused disruption of the waste vehicular movement. Step-by-step improvement measures have been taken in the open dump to make it controlled and sanitary by adopting simple and locally available materials, technical guidelines, and construction techniques.     

Population and Environment： Necessary Transition Initiatives for Developing Countries

Now environment is an important topic in academic field. Many researches focus on the negative outcomes of nature which are being continually created by human and much attention has been paid to how the environment is protected through integrated research, movement and policy. But few studies are concentrated on population and environment and are to find out the interconnectivity and underlying mechanism that have an effect on people＇s preferring additional children and perception to environment. Many researchers claim that population growth is a great problem for environment but they do not provide the indepth integrated knowledge and mechanism that influence fertility trend and environmental problems. It is very crucial to develop practical and concrete initiatives to confirm a transition to reduce population growth and redirect the perception on population and environment.     

Determination of volatile organic compounds pollution sources in malaysian drinking water using multivariate analysis

A field investigation was conducted at all water treatment plants throughout 11 states and Federal Territory in Peninsular Malaysia. The sampling points in this study include treatment plant operation, service reservoir outlet and auxiliary outlet point at the water pipelines. Analysis was performed by solid phase micro-extraction technique with a 100 μm polydimethylsiloxane fibre using gas chromatography with mass spectrometry detection to analyse 54 volatile organic compounds (VOCs) of different chemical families in drinking water. The concentration of VOCs ranged from undetectable to 230.2 μg/l. Among all of the VOCs species, chloroform has the highest concentration and was detected in all drinking water samples. Average concentrations of total trihalomethanes (THMs) were almost similar among all states which were in the range of 28.4--33.0 μg/l. Apart from THMs, other abundant compounds detected were cis and trans-1,2-dichloroethylene, trichloroethylene, 1,2-dibromoethane, benzene, toluene, ethylbenzene, chlorobenzene, 1,4-dichlorobenzene and 1,2-dichloro - benzene. Principal component analysis (PCA) with the aid of varimax rotation, and parallel factor analysis (PARAFAC) method were used to statistically verify the correlation between VOCs and the source of pollution. The multivariate analysis pointed out that the maintenance of auxiliary pipelines in the distribution systems is vital as it can become significant point source pollution to Malaysian drinking water.     

Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches

The adsorption capacity of activated carbon produced from oil palm empty fruit bunches through removal of 2,4-dichlorophenol from aqueous solution was carried out in the laboratory. The activated carbon was produced by thermal activation of activation time with 30 min at 800℃. The adsorption process conditions were determined with the statistical optimization followed by central composite design. A developed polynomial model for operating conditions of adsorption process indicated that the optimum conditions for maximum adsorption of phenolic compound were： agitation rate of 100 r/min, contact time of 8 h, initial adsorbate concentration of 250 mg/L and pH 4. Adsorption isotherms were conducted to evaluate biosorption process. Langmuir isotherm was more favorable （R^2=0.93） for removal of 2,4-dichlorophenol by the activated carbon rather than Freundlich isotherm （R^2=0.88）.