Needs-based sewerage prioritization: alternative to conventional cost-benefit analysis

This paper presents an empirical approach to select and prioritize sewerage projects within set budgetary limitations. The methodology includes a model which quantifies benefits of a sewerage project as an index or dimensionless number. The index considers need and urgency of sewerage and other project goals. Benefit is defined as the difference in anticipated impact between the current condition (without the project) and the expected condition with the project. Anticipated benefits primarily include reduction in environmental pollution, reduction of human diseases and morbidity, and other tangible and intangible improvement. This approach is a powerful decision tool for sewerage prioritization and an effective alternative to conventional cost-benefit analysis. Unlike conventional analysis, this approach makes no attempt to convert project benefits and other impacts into a monetary measure. This work recognizes that the decision to provide sewerage based solely on net benefits is not practical. Instead, benefit-cost ratios (B/C) are calculated utilizing cost-effectiveness approach. Using these ratios, 16 unserviced areas of Ensenada, Mexico are ranked. The prioritization rankings produced by this method must be further scrutinized and carefully reviewed for logic, accuracy of input data, and practicality of implementation. A similar framework may also be useful for prioritizing other public works projects.     

Occurrence of heavy metals in fish: a study for impact assessment in industry prone aquatic environment around Kolkata in India

A study was conducted during November 2005-October 2006 for determining the heavy metal contamination in surface water and sediments and giving prime thrust to determine the heavy metal concentrations fish samples collected from various points of the river Ganga at different time interval. Fish samples (viz., Channa marulius and Aorichthys seengala) were analyzed for heavy metals using standard laboratory procedures by AAS method. In impact points the annual average values for Cu, Cr, Cd, Pb and Zn were 0.15, 0.04, 0.03, 0.02 and 0.29 ppm, respectively. The concentrations of heavy metals in the riverine water collected from middle point had the order Zn > Cu > Cr > Cd > Pb. The data indicated that copper was maximally accumulated in the riverine sediments whereas least annual average concentration was obtained for lead. The trend of accumulation suggested deposition was maximum for zinc and minimum for cadmium in the muscles of both fish species. Only zinc has shown some significant seasonal variation in relation to metal deposition in fish muscles (minimum in monsoon and maximum in summer). The heavy metal contamination to fish may be due to indiscriminate discharge of polluted and untreated sewage sludge to the river. The heavy metal contents in fish at some places are alarming.     

The Effect of Job and Environmental Factors on Job Satisfaction in Automotive Industries

A methodology was developed for diagnosing industrial work, which includes questionnaire, observation, measurements, data collection and statistical analysis. A survey was conducted to investigate the relationship between job satisfaction and factors that affect work design in 2 automotives manufacturing companies in Malaysia. A basic work design model was proposed. The aim of this model was to determine the factors that influence employees’ perception towards their work. A set of multiple-choice questionnaires was developed and data was collected by interviewing employees at a production plant. The survey focused on job and environmental factors. The results supported the proposed model and showed that job and environmental factors were significantly related to job satisfaction. They highlighted the significant influence of age, work experience and marital status on job satisfaction. Further, environmental factors, especially the surroundings, context dependence and the building’s function, also had a significant impact on job satisfaction.     

Do phytotoxic allelochemicals remain in ashes after burning Chrysanthemoides monilifera subsp. monilifera (boneseed)?

Australia is facing challenges in controlling Chrysanthemoides monilifera subsp. monilifera(boneseed). However, burning has achieved some success in this regard. We aimed to investigate the comparative phytotoxicity of boneseed dried powder and ashes(burnt at 450℃ and250℃). Phenolic compounds in powder and ashes were measured using Folin–Ciocalteu assay and HPLC. The phytotoxicity of boneseed powder and ash extracts was assessed through germination bioassay on Lactuca sativa and the phytotoxicity of litter and ashes was evaluated using field soil, both in growth chamber. Burning of boneseed reduced total phenolics in ashes of boneseed organs by 99% and 100% both at high and low temperatures. The four phenolic compounds that were detected in boneseed were either absent or at negligible levels in the ashes,with inversely related to temperature. Both boneseed ash extracts and litter ash-mediated soil significantly reduced phytotoxicity displaying increased germination, biometric and biochemical parameters of test species compared with unburnt powder extracts and litter powder-mediated soil respectively, with greater reduction of phytotoxicity found for ashes produced at the lower temperature. Interestingly, the ash extracts and litter ash-mediated soil were found to stimulate some of those parameters of the test species compared to control. There was no excessive reactive oxygen species(ROS) produced in test species exposed to ash extracts compared with unburnt powder extracts. These findings suggest that burning of boneseed is an appropriate method of weed control and that this approach will reduce phytotoxicity of this species on native plants.     

Spatiotemporal mapping of Land Use/Land Cover dynamics using Remote Sensing and GIS approach: a case study of Prayagraj City,India (1988–2018)

Environment, Development and Sustainability - Prayagraj City is one the biggest cities in the State of Uttar Pradesh which has been selected as Smart City by Ministry of Housing and Urban Affairs,...     

How safe are standard certified motorcycle safety helmets? Malaysian postal delivery riders scenario

Objective: The objective of this study was to determine the proportion of motorcycle safety helmets (MSHs) used by postal delivery riders (PDRs) that comply with the Standards and Industrial Research Institute of Malaysia’s (SIRIM) MSH standard guidelines and identify factors that contribute toward compliance of used MSHs with the standards.

Methods: The presence of SIRIM certification label, the status of MSH, type of chinstrap, MSH crash history, and duration of MSH use were observed. The dependent variable was the results of the SIRIM testing procedures (SIRIM tests). MSHs that passed the SIRIM tests were considered “standard certified” MSHs.

Results: The odds of the complimentary MSHs passing all of the SIRIM tests were 3.7 times the odds of the self-purchased MSHs passing the tests. The odds of MSHs with the SIRIM certification label passing all of the SIRIM tests were 24.2 times the odds of MSHs without the SIRIM certification label, and the odds of MSHs used <3?years passing the SIRIM tests were 3.75 times the odds of the MSHs used ≥3.8?years.

Conclusion: PDRs provided with complimentary MSHs with the SIRIM certification label by the employer for their daily delivery routines and duration of MSH used for less than 3 years were found to be safe MSHs for male occupational riders in Malaysia.     

Performance of a commercial radon-in-water measurement kit

Methods currently approved for the measurement of radon ((222)Rn) in water in New York State are liquid scintillation counting and emanation into alpha-scintillation cells. A passive system using an electret ion chamber (EIC) was evaluated as an alternative for the measurement of radon in water. Over 130 water samples from a community water supply containing 32BqL(-1) and 30 standards containing 686BqL(-1) were measured using the EIC method over 1- to 4-day exposure times. For comparison, identical samples were measured using liquid scintillation counting. Results of duplicate samples were typically within 5% for liquid scintillation counting and within 10% for the EIC. With respect to accuracy, the EIC produced results that were consistently low by 11-15%.     

Partitioning of radiostrontium in marine aqueous suspensions: laboratory experiments and modeling studies

Quantitative information on the adsorption/desorption of radionuclides by suspended loads is important in the study of their environmental behavior. In this paper, controlled laboratory experiments were directed at studying the kinetic transfer and final distribution of radiostrontium in aqueous suspensions using 85Sr as tracer. The results showed that the uptake of 85Sr in seawater can be properly described by one reversible-reaction model. However, in the absence of competitive cations, it has been shown that two reactions of different characteristic times are unambiguously involved in the kinetic evolution of adsorption. Thus, a modeling approach consisting of three-box model has been applied. The model predicts in a satisfactory way the time evolution of activities in the dissolved phase and two sites in the particles. Experimental evidence showed, through comparison among kinetic and distribution coefficients corresponding to different conditions, that Ca2+ affects strongly the rate and extent of Sr uptake by suspended particles. On the other hand, distribution coefficients were found to be sensitive to changes in suspended particulate matter (SPM) concentration, exhibiting a reverse effect with this parameter on the adsorption. In addition, desorption from particles is important showing that Sr can be easily released due to cation-exchange processes.