Source identification, contamination status and health risk assessment of heavy metals from road dusts in Dhaka, Bangladesh

In this study, concentrations of Cr, Mn, Ni, Cu, Zn, Cd and Pb were determined in road dusts collected from different locations in Dhaka to assess source, contamination status and health risk. Energy-dispersive X-ray fluorescence spectroscopy and energy-dispersive X-ray spectroscopy were used to determine Cr, Mn, Ni, Cu, Zn, Cd and Pb and their mean concentrations were 162.27 ± 29.46, 721.18 ± 180.14, 35.65 ± 12.55, 104.56 ± 128.33, 515.32 ± 321.90, BDL, and 342.82 ± 591.20 mg/kg, respectively. Among the heavy metals, highest concentrations of Cu, Zn and Pb were found at urban sites-7 (municipal waste dumping) and 8 (medical waste incineration). Highest concentration of Cr followed by Cu and Zn was found at site-5 (Tejgaon, urban). Principal component analysis revealed that anthropogenic activities are the potential sources for Cr, Ni, Cu, Zn and Pb while earth crust for Mn. Pollution index and pollution load index results suggested that all the sites were contaminated and/or degraded by Cr, Cu, Zn and Pb except sites-9 (urban), 10 (sub-urban), 11 (rural) while sites-7 and 8 (urban) were extremely degraded. For noncarcinogenic health risk, hazard quotient values for dermal were higher compared to that of inhalation/ingestion. Though hazard index values were less than 1 at all the sites, these were at least one order of magnitude higher for children group than that of adult group, thus the children group may face more noncarcinogenic health risk at sites-7 and 8. Values of incremental lifetime cancer risk were from 10⁻⁹ to 10⁻¹¹ showed no carcinogenic health risk by road dusts contaminated with the heavy metals.     

Potential sources and meteorological factors affecting PM<Subscript>2.5</Subscript>-bound polycyclic aromatic hydrocarbon levels in six main cities of northeastern Italy: an assessment of the related carcinogenic and mutagenic risks

A yearlong sampling campaign (2012–2013) was conducted in six major cities of the Veneto region to investigate the spatial-temporal trends and the factors affecting the polycyclic aromatic hydrocarbon (PAHs) variations and identify the local sources. Sixty samples per city were collected for analyses in every alternate month (April, June, August, October, December, and February): 10 samples per sampling site in 10 consecutive days of the months selected. Samples were ultrasonically extracted with acetonitrile and processed through high-performance liquid chromatography. Total Σ-PAH concentrations ranged from 0.19 to 70.4 ng m^?3 with a mean concentration of 11.5 ng m^?3. The mean benzo[a]pyrene (BaP) concentration reached 2.0 ng m^?3, which is two-times higher than the limit set by the European Union. BaP contributed for 17.4% to the total concentration of PAHs, which showed the same pattern across the region with maxima during cold months and minima in the warm period. In this study, PAHs showed an inverse relationship with temperature, solar radiation, wind speed, and ozone. According to this study, biomass burning for household heating and cooking, followed by gaseous PAHs absorption on particles due to low atmospheric temperature, were the main reasons for increasing PAHs concentration in winter. Health risk, evaluated as lifetime lung cancer risk (LCR), showed a potential carcinogenic risk from the airborne BaP_TEQ six-fold higher in the cold season than in the warm one. Diagnostic ratios and conditional probability functions were used to locate the sources, and results confirmed that local emission, overall domestic heating, and road transport exhausts were responsible for higher concentration rates of PAHs as well as of PM_2.5.     

The effects of temperature on decomposition and allelopathic phytotoxicity of boneseed litter

Decomposition of plant litter is a fundamental process in ecosystem function, carbon and nutrient cycling and, by extension, climate change. This study aimed to investigate the role of temperature on the decomposition of water soluble phenolics(WSP), carbon and soil nutrients in conjunction with the phytotoxicity dynamics of Chrysanthemoides monilifera subsp. monilifera(boneseed) litter. Treatments consisted of three factors including decomposition materials(litter alone, litter with soil and soil alone), decomposition periods and temperatures(5–15, 15–25and 25–35°C(night/day)). Leachates were collected on 0, 5, 10, 20, 40 and 60 th days to analyse physico-chemical parameters and phytotoxicity. Water soluble phenolics and dissolved organic carbon(DOC) increased with increasing temperature while nutrients like SO-24 and NO-13 decreased. Speed of germination, hypocotyl and radical length and weight of Lactuca sativa exposed to leachates were decreased with increasing decomposition temperature. All treatment components had significant effects on these parameters. There had a strong correlation between DOC and WSP, and WSP content of the leachates with radical length of test species. This study identified complex interactivity among temperature, WSP, DOC and soil nutrient dynamics of litter occupied soil and that these factors work together to influence phytotoxicity.     

The roles of nuclear energy,renewable energy,and economic growth in the abatement of carbon dioxide emissions in the G7 countries

Environmental Science and Pollution Research - In the current century, the G7 countries have attached more importance to energy security, and have prioritized low-carbon sources which have...     

Waste battery disposal and recycling behavior: a study on the Australian perspective

Environmental Science and Pollution Research - Consumer behavior is a critical consideration for the development of sustainable waste management systems, including waste batteries, which pose a...     

The impact of environment degrading factors and remittances on health expenditure: an asymmetric ARDL and dynamic simulated ARDL approach

This paper investigates the impact of CO₂ emissions, air pollution (PM2.5) exposure, foreign remittances, energy consumption, renewable energy consumption, trade openness, and gross domestic product per capita on health expenditure in a panel of the 27 highest emitting countries from 2000 to 2019. Focusing on objectives, panel ARDL, and dynamic simulated ARDL models are used to examine the short-run and long-run impact of the variables on health expenditure. An asymmetric or nonlinear ARDL model is used to test the asymmetric effect of CO₂ emissions, air pollution exposure, and foreign remittance inflows on health expenditure. The results show that environment-degrading factors, remittances, and GDP per capita significantly impact health expenditure. There is an asymmetric effect of remittances, CO₂ emissions, and air pollution (PM2.5) exposure on health expenditure. Based on the results, the study suggests policymakers should make policies regarding environment-degrading elements as these factors cause huge increases in health spending in a country. Consumption of renewable energy helps reduce health expenditure as it does not cause environmental degradation, irrespective of other forms of energy, and it is suggested that policies relating to foreign remittance inflows should be encouraged and made efficient.

     

Do credit constraints affect the technical efficiency of Boro rice growers? Evidence from the District Pabna in Bangladesh

Environmental Science and Pollution Research - This study analyzes the effects of credit constraints on technical efficiency of Boro rice growers in the district of Pabna in Bangladesh. Using a...     

5-fluorouracil and curcumin with pectin coating as a treatment regimen for titanium dioxide with dimethylhydrazine-induced colon cancer model

Environmental Science and Pollution Research - Colorectal cancer was inducted in Wister rats using titanium dioxide nanoparticles (TiO2NPs) and dimethylhydrazine (DMH) and treatment using...     

The individual and cumulative effect of brominated flame retardant and polyvinylchloride (PVC) on thermal degradation of acrylonitrile-butadiene-styrene (ABS) copolymer

Acrylonitrile-butadiene-styrene (ABS) copolymers without and with a polybrominated epoxy type flame retardant were thermally degraded at 450 degrees C alone (10 g) and mixed with polyvinylchloride (PVC) (8 g/2 g). Gaseous and liquid products of degradation were analysed by various gas chromatographic methods (GC with TCD, FID, AED, MSD) in order to determine the individual and cumulative effect of bromine and chlorine on the quality and quantity of degradation compounds. It was found that nitrogen, chlorine, bromine and oxygen are present as organic compounds in liquid products, their quantity depends on the pyrolysed polymer or polymer mixture. Bromophenol and dibromophenols were the main brominated compounds that come from the flame retardant. 1-Chloroethylbenzene was the main chlorine compound observed in liquid products. It was also determined that interactions appear at high temperatures during decomposition between the flame retardant, PVC and the ABS copolymer.     

Wood smoke as a source of particle-phase organic compounds in residential areas

The objective of this study was to investigate the organic composition of wood smoke emissions and ambient air samples in order to determine the wood smoke contribution to the ambient air pollution in the residential areas. From November 2005 to March 2006 particle-phase PM₁₀ samples were collected in the residential town Dettenhausen surrounded by forests near Stuttgart in southern Germany. Samples collected on pre-baked glass fibre filters were extracted using toluene with ultrasonic bath and analysed by gas chromatography mass spectrometry (GC-MS). 21 polycyclic aromatic hydrocarbons (PAH) including 16 USEPA priority pollutants, different organic wood smoke tracers, primarily 21 species of syringol and guaiacol derivatives, levoglucosan and its isomers mannosan, galactosan and dehydroabietic acid were detected and quantified in this study. The concentrations of these compounds were compared with the fingerprints of emissions from hardwood and softwood combustion carried out in test facilities at Universitaet Stuttgart and field investigations at a wood stove during real operation in Dettenhausen. It was observed that the combustion derived PAH was detected in higher concentrations than other PAH in the ambient air PM₁₀ samples. Syringol and its derivatives were found in large amounts in hardwood burning but were not detected in softwood burning emissions. On the other hand, guaiacol and its derivatives were found in both softwood and hardwood burning emissions, but the concentrations were higher in the softwood smoke compared to hardwood smoke. So, these compounds can be used as typical tracer compounds for the different types of wood burning emissions. In ambient air samples both syringol and guaiacol derivatives were found which indicates the wood combustion contribution to the PM load in such residential areas. Levoglucosan was detected in high concentrations in all ambient PM₁₀ samples. A source apportionment modelling, Positive Matrix Factorization (PMF) was implemented to quantify the wood smoke contribution to the ambient PM₁₀ bound organic compounds in the residential area.