Stagnant surface water bodies (SSWBs) as an alternative water resource for the Chittagong metropolitan area of Bangladesh: physicochemical characterization in terms of water quality indices

The concern over ensuing freshwater scarcity has forced the developing countries to delve for alternative water resources. In this study, we examined the potential of stagnant surface water bodies (SSWBs) as alternative freshwater resources in the densely populated Chittagong metropolitan area (CMPA) of Bangladesh??where there is an acute shortage of urban freshwater supply. Water samples were collected at 1-month intervals for a period of 1 year from 12 stations distributed over the whole metropolis. Samples were analyzed for pH, water temperature (WTemp), turbidity, electrical conductivity (EC), total dissolved solids, total solids, total hardness, dissolved oxygen (DO), chloride, orthophosphates, ammonia, total coliforms (TC), and trace metal (Cd, Cr, Cu, Pb, As, and Fe) concentrations. Based on these parameters, different types of water quality indices (WQIs) were deduced. WQIs showed most of CMPA-SSWBs as good or medium quality water bodies, while none were categorized as bad. Moreover, it was observed that the minimal water quality index (WQI_m), computed using five parameters: WTemp, pH, DO, EC, and turbidity, gave a reliable estimate of water quality. The WQI_m gave similar results in 72% of the cases compared with other WQIs that were based on larger set of parameters. Based on our finding, we suggest the wider use WQI_m in developing countries for assessing health of SSWBs, as it will minimize the analytical cost to overcome the budget constraints involved in this kind of evaluations. It was observed that except turbidity and TC content, all other quality parameters fluctuated within the limit of the World Health Organization suggested standards for drinking water. From our findings, we concluded that if the turbidity and TC content of water from SSWBs in CMPA are taken care of, they will become good candidates as alternative water resources all round the year.     

Physicochemical factors and sources of particulate matter at residential urban environment in Kuala Lumpur

Long-term measurements (2004–2011) of PM₁₀ (particulate matter with an aerodynamic diameter <10 μm) and trace gases (carbon monoxide [CO], ozone [O₃], nitrogen oxide [NO], oxides of nitrogen [NO_x], nitrogen dioxide [NO₂], sulfur dioxide [SO₂], methane [CH₄], nonmethane hydrocarbon [NMHC]) have been conducted to study the effect of physicochemical factors on the PM₁₀ concentration. In addition, this study includes source apportionment of PM₁₀ in Kuala Lumpur urban environment. An advanced principal component analysis (PCA) technique coupled with absolute principal component scores (APCS) and multiple linear regression (MLR) has been applied. The average annual concentration of PM₁₀ for 8 yr is 51.3 ± 25.8 μg m^?3, which exceeds the Recommended Malaysian Air Quality Guideline (RMAQG) and international guideline values. Detail analysis shows the dependency of PM₁₀ on the linear changes of the motor vehicles in use and the amount of biomass burning, particularly from Sumatra, Indonesia, during southwesterly monsoon. The main sources of PM₁₀ identified by PCA-APCS-MLR are traffic combustion (28%), ozone coupled with meteorological factors (20%), and windblown particles (1%). However, the apportionment procedure left 28.0 μg m^?3, that is, 51% of PM₁₀ undetermined.

Implications: Air quality is always a top concern around the globe. Especially in the South Asian regions, measures are not yet sufficient; as revealed in our studies, the concentrations of particulate matters exceed the tolerable limits. Long-term data analysis and characterization of particular matters and their sources will aid the policy makers and the concerned authority to adapt measures and policies according to the circumstances. Additionally, similar intensive studies will give insight about future implications of air quality management.     

Direct and Indirect Effects of Socioeconomic Factors on Age at First Marriage in Slum Areas,Bangladesh

This article attempts to examine the influence of some selected predictor variables on female age at first marriage in slum areas of Bangladesh. A path and multiple classification analysis (MCA) approach have been adopted. Authors thought that respondent’s educational level and the mass media such as watching television have a significant direct impact on age at marriage, while the types of family and occupational status have an indirect effect on age at marriage.     

Prenatal diagnostic procedure for leukocyte adhesion deficiency

Leukocyte adhesion deficiency (LAD) is a rare autosomal recessive disorder which leads to recurrent severe infections due to impaired leukocyte functions. The disorder is caused by an absence or deficiency of leukocyte cell adhesion molecules (LeuCAMs) on the leukocyte membranes. The diagnosis is established with monoclonal antibodies against the LeuCAMs. We have carried out a prenatal diagnostic procedure by means of cordocentesis in a mother who was 20 weeks pregnant and had previously given birth to a child with LAD. This previous child had the severe form of LAD with undetectable mRNA for the β chain, the common subunit of the LeuCAMs. We found that the fetal granulocytes expressed the LeuCAMs normally. At birth, the baby was physically normal and showed no signs of impaired leukocyte functions.     

Hydroxychloroquine in COVID-19: therapeutic promises,current status,and environmental implications

Environmental Science and Pollution Research - The outbreak of novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has affected the entire world with its infectious spread and...     

Soft subgrades’ stabilization by using various fly ashes

This publication presents the results of research involving different types of self-cementing fly ashes (without any other activators) for the stabilization of four different types of soft subgrades from various road sites in Wisconsin, USA. The strength approaches were applied to estimate the optimum mixture design and to determine the thickness of the stabilized layer. The stabilized soil samples were prepared by mixing fly ash at different contents at varying water contents. The performance of fly ash stabilized subbase depends both on the specific source of fly ash and the engineering properties of soils. It is suggested that the performance analysis of fly ash should be based upon the laboratory tests such as index properties, compaction, unconfined compressive strength and CBR tests of a specific site. This is suggested rather than using the study of the physical properties and chemical composition of fly ash and soil. As disclosed in the literature, the strength gain due to stabilization depends mainly upon three factors; ash content, molding water content and compaction delay. The samples were subjected to unconfined compression strength and California bearing ratio (CBR) tests after 7 days curing time to develop water content–strength relationship. To evaluate the impact of compaction delay that commonly occurs in the field during construction, the sets of samples were compacted 2 h later after mixing with water. The unconfined compression strength and CBR tests were performed and used to determine the thickness of the stabilized layer in pavement design. All of these factors were taken into account throughout this research.     

Report: Healthcare waste characterization in Chittagong Medical College Hospital, Bangladesh

Healthcare waste management (HCWM) options are inconsistent in Bangladesh. One of the first critical steps in the process of developing a reliable waste management plan requires a comprehensive understanding of the quantities and characteristics of the waste that needs to be managed. This study took into consideration both the quantity and quality of the generated waste to determine the generation rates and physical properties of healthcare waste (HCW) in Chittagong Medical College Hospital (CMCH) and also to estimate the amount of infectious and non-infectious waste generated in different wards. CMCH, the second largest hospital in Bangladesh, comprises 34 wards, 12 of which were selected randomly. Waste materials were collected from these wards and then segregated and weighed. Waste generation per day was found to be 73.22 kg/ward, 1.28 kg/bed and 0.57 kg/patient. A total of 2490 kg of HCW was produced each day in CMCH (37% being infectious and the rest being non-infectious waste). Infectious waste was 27.07 kg per ward, 0.47 kg per bed and 0.21 kg per patient and the non-infectious waste was 46.15 kg per ward, 0.81 kg per bed and 0.36 kg per patient per day. HCW comprised eight categories of waste materials with vegetable/food waste being the largest component (50.21%) and varied significantly (P < 0.05) among the 12 different wards studied. The greatest amount of HCW was recorded (154 kg) in Orthopaedics followed by 96.66 kg in the Medicine Unit-3 and the smallest amount was recorded in Casualty (8.79 kg). The amount of HCW was positively correlated with the number of occupied beds (rxy = 0.79, P < 0.01). There is no structured form of medical waste treatment in CMCH and most waste materials are dumped in open areas for natural degradation or re-sold by scavengers. It is essential to develop a national policy and implement a comprehensive action plan for HCWM that will provide environmentally sound technological measures to improve HCWM in Bangladesh.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Microfibrillated Cellulose-Silver Nanocomposite Based PVA Hydrogels and Their Enhanced Physical,Mechanical and Antibacterial Properties

Journal of Polymers and the Environment - Modification of cellulose with silver nanoparticles produces various nanocomposites with significantly developed properties. This work aims to prepare a...     

Environmental perception during rapid population growth and urbanization: a case study of Dhaka city

Dhaka city in Bangladesh has been passing through a hasty process of urbanization and population growth since the last few decades. Rapid growth of population, unplanned urbanization and industrialization in the periphery has generated pressure to the changes in land use pattern, which has also caused huge urban expansion. This expansion process is engulfing cultivated land, vegetation, wetlands and water bodies without considering their environmental impacts. This study argues that these changes and their scale of environmental impacts or sufferings are not equally distributed among the dwellers in Dhaka city. It seeks to explore variations of environmental qualities on the basis of people’s perceptions. The study finds that the dwellers in the city perceive their neighborhood environment differently, which may affect environmental qualities of the area and their sustainable management as well. Therefore, it is imperative to consider spatial variations and inequalities of environmental opportunities or sufferings in urban planning of Dhaka city.