Determination of mercury and arsenic levels in fish caught in the Beheshtabad River,Chaharmahal and Bakhtiari Province,Iran

Mercury and arsenic pollution has been recognized as a potential environmental and public health problem for over 40 years. The major source of exposure to mercury for humans is the ingestion of fish. This study was conducted with the aim of determining the levels of mercury and arsenic in the muscles of four fish species caught in the Beheshtabad River and comparing the results with the maximum tolerance levels for mercury and arsenic. The samples of 90 fish were used for the determination of both the metals by graphite furnace atomic absorption spectrometry. The results showed that the concentrations ranged from 1.5 to 3.8 µg kg^?1 for mercury and from 35 to 70 µg kg^?1 for arsenic, with means of 2.7 ± 0.5 and 57 ± 12 µg kg^?1, respectively. Both mean levels were lower than the threshold limits acceptable by WHO standards.     

Application of electrochemical reactor divided by cellulosic membrane for optimized simultaneous removal of phenols,chromium, and ammonia from tannery effluents

The post treatment of simulated tannery wastewater was evaluated in an electrochemical oxidation process under galvanostatic conditions. A continuous flow reactor divided by a cellulosic membrane consisted of Ti/SnO₂–Sb anodes and iron cathodes was used. Central composite design and response surface methodology (RSM) were applied to investigate the effects of six operational parameters, namely initial concentration of total phenols (TPh), total chromium (TCr), total ammonia nitrogen (TAN), flow rate (Q), current intensity (I), and electrode surface area (A). Effectiveness of the innovative cellulosic membrane was proven by considerable pH variations in the anolyte and catholyte chambers. A faster removal rate was observed for TPh and TAN, followed by TCr. The treatment level was very sensitive to Q and I in the studied ranges. RSM showed the removal efficiencies of 78.14%, 63.42%, and 86.09% for TPh, TCr, and TAN, respectively, are achieved under optimal conditions with consumption of only 9.03 kWh m^?3 electrical energy. Chlorinated compounds such as chloroform, 2,4-dichlorophenol, and chlorobenzene were detected as the degradation intermediates. According to the obtained results, electrolysis in the divided cell with cellulosic membrane is a practical, cost-effective method for advanced treatment of tannery effluents.     

Temporary site selection and decision‐making methods: a case study of Tehran,Iran

Decisions on selecting an appropriate site for temporary shelter used to be taken in a limited amount of time after a disaster. The need for a systematic method in this area inspired the MADM (multi‐attribute decision making) for complex disaster management decisions. This research proposes a model for appropriate and systematic site selection for temporary shelters, before an earthquake, using a geographical information system and MADM based on an earthquake damage assessment. After the effective criteria for site selection of temporary shelters are determined, the geographical layers of these criteria are prepared for Municipal District No.1 of Greater Tehran, the capital of Iran. Given these attributes and the required shelter area (415–610 hectares), 14 zones are proposed initially. Various MADM methods are used for the final selection. The mean of the aggregated ranking results are determined, and 10 of the 14 initial zones are ranked.     

Hydrogeochemistry study and groundwater quality assessment in the north of Isfahan,Iran

This study presents the groundwater quality assessment in the north of Isfahan, Iran. In the study area, assessment and measurement of groundwater hydrochemical parameters such as pH, total dissolved solids (TDS), electrical conductivity (EC), sodium absorption ratio (SAR), total hardness, major cations (K⁺, Na⁺, Ca²⁺ and Mg²⁺) and major anions (Cl^?, \({\text{HCO}}_{ 3}^{ - } ,{\text{CO}}_{3}^{2 - }\) and \({\text{SO}}_{4}^{2 - }\)) concentrations were performed. Accordingly, the 66 water samples from different locations were collected during April and May 2015. Water samples collected in the field were analyzed in the laboratory for cations and anions using the standard methods. In this research, the analytical results of physiochemical parameters of groundwater were compared with the standard guideline values as recommended by the world health organization (WHO) for drinking and public health purposes. The pH values of groundwater samples varied from 7.05 to 8.95 with a mean of 7.78, indicating a neutral to slightly alkaline water. TDS values showed that 14% of the samples exceeds the desirable limit given by WHO. EC values varied from 213 to 4320 µS/cm, while 23% of the samples were more than the standard limit. Gibbs diagram had shown that 90% of the samples in the study area fall in the rock weathering zone, and this means that chemical weathering of rock-forming minerals is the main factor controlling the water chemistry in the study area. Irrigation suitability and risk assessment of groundwater are evaluated by measuring EC, %Na, SAR and RSC. According to the dominant cations and anions, five types of water were identified in the water samples: Ca-HCO₃, Ca-SO₄, Na-Cl, Na-HCO₃ and Na-SO₄. The results show that the majority of samples (30 samples, 45%) belongs to the mixed Na-SO₄ water type. Correlation analysis and principal component analysis was used to identify the relationship between ions and physicochemical parameters. Results indicated that 18 stations of the study area had the best quality and can be used for irrigation and drinking purposes in the future.     

Potential of Calendula alata for phytoremediation of stable cesium and lead from solutions

Calendula alata plants were tested for their potential to remove stable cesium and lead from solutions in a 15-day period. The plants were grown hydroponically and placed in solutions containing CsCl and Pb(C?H?O?)? at different concentrations (0.6, 2 and 5 mg l?1). When plants were incubated in CsCl solutions 46.84 ± 2.12%, 41.35 ± 1.59%, and 52.06 ± 1.02% cesium was found to be remediated after 15 days. Moreover, more than 99% lead was removed from the Pb(C?H?O?)? solution in all three concentrations after 15 days during the same period. When both CsCl and Pb(C?H?O?)? were supplemented together in the solution, 9.92 ± 1.22%, 45.56 ± 3.52%, and 46.16 ± 1.48% cesium and 95.30 ± 0.72%, 96.64 ± 0.30%, and 99.02 ± 0.04% lead were removed after 15 days. The present study suggests that hydroponically grown C. alata could be used as a potential candidate plant for phytoremediation of cesium and lead from solutions; however, plants were found to be more efficient for the remediation of lead than cesium.     

Development of Cellulose Aerogel as a New Material for the Reduction of Harmful Substances in Cigarette Smoke

The current study proposes a novel and improved cigarette filtration design comprising cellulose nanofibers (CNFs) and powdered activated carbons (PACs) with different dry matter contents. The proposed filter samples were primarily analyzed to verify their applicability as cigarette filters via measurements and standard tests, such as SEM, BET, DSC, and airflow permeability analysis. The results were compared with the cellulose acetate (CA) sample used as a conventional cigarette filter. The preliminary results indicated noticeable improvement compared to the reference CA. Also, the cigarettes were tested using a smoking machine, and the filtered smoke was analyzed using GC–MS to evaluate the filters' performance in reducing the harmful substances present in the smoke. The results showed that the filters made of CNF and PAC significantly decreased the toxic substances compared with the reference but did not affect the nicotine substantially and therefore will not negatively impact the trance level of smokers.

     

ModelOps for enhanced decision-making and governance in emergency control rooms

Environment Systems and Decisions - For mission critical (MC) applications such as bushfire emergency management systems (EMS), understanding the current situation as a disaster unfolds is critical...     

Increased Levels of serum Pentraxin 3 in Critical Coronavirus Disease-2019 Patients

Environmental Science and Pollution Research - Pentraxin 3 (PTX3) and ficolin are the plasma phase of pattern recognition receptors (PRRs) and can activate complement through classical and lectin...     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Experimental and DFT insights into nitrogen and sulfur co-doped carbon nanotubes for effective desulfurization of liquid phases: Equilibrium & kinetic study

• Synthesis of NS-CNTS is used in a high desulfurization performance. • Synthesizing NS-CNT is considered as a novel adsorbent from low-cost precursors. • A high sulfur removal capacity for NS-CNT is attained compared with recent works. Herein, nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000°C by employing the camphor, urea and sulfur trioxide pyridine. In this study, desulfurization of two types of mercaptans (dibenzothiophene (DBT) and tertiary butyl mercaptan (TBM) as nonlinear and linear forms of mercaptan) was studied. In this regard, a maximum capacity of NS-CNT was obtained as 106.9 and 79.4 mg/g and also the removal efficiencies of 98.6% and 88.3% were achieved after 4 h at 298K and 0.9 g of NS-CNT for DBT and TBM, respectively. Characterization of the NS-CNTs was carried out through exploiting scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and elemental analysis (CHN). The isotherm equilibrium data could be ascribed to the Freundlich nonlinear regression form and the kinetic data was fitted by nonlinear form of the pseudo second order model. The negative values of ΔS⁰, ΔH⁰ and ΔG⁰ specify that the adsorption of both types of mercaptans was a natural exothermic process with a reduced entropy. Maintenance of more than 96% of the adsorption capacity even after nine cycles suggest the NS-CNT as a superior adsorbent for mercaptans removal in the industry. Density functional theory (DFT) calculations were also performed to peruse the effects of S/N co-doping and carbon monovacancy defects in CNTs toward the adsorption of DBT and TBM.