Response of coral assemblages to thermal stress: are bleaching intensity and spatial patterns consistent between events?

Mass bleaching events resulting in coral mortality are among the greatest threats to coral reefs, and are projected to increase in frequency and intensity with global warming. Achieving a better understanding of the consistency of the response of coral assemblages to thermal stress, both spatially and temporally, is essential to determine which reefs are more able to tolerate climate change. We compared variations in spatial and taxonomic patterns between two bleaching events at the scale of an island (Moorea Island, French Polynesia). Despite similar thermal stress and light conditions, bleaching intensity was significantly lower in 2007 (approximately 37 % of colonies showed signs of bleaching) than in 2002, when 55 % of the colonies bleached. Variations in the spatial patterns of bleaching intensity were consistent between the two events. Among nine sampling stations at three locations and three depths, the stations at which the bleaching response was lowest in 2002 were those that showed the lowest levels of bleaching in 2007. The taxonomic patterns of susceptibility to bleaching were also consistent between the two events. These findings have important implications for conservation because they indicate that corals are capable of acclimatization and/or adaptation and that, even at small spatial scales, some areas are consistently more susceptible to bleaching than others.     

Cloud point extraction–atomic absorption spectrometry for pre-concentration and determination of cadmium in cigarette samples

A new complexing agent, 2-((2-((1H-benzo[d]imidazole-2yl)methoxy)phenoxy)methyl)-1H-benzo[d]imidazole (BIMPI), was used in cloud point extraction and applied for selective pre-concentration of trace amounts of cadmium in cigarette samples. Cadmium was complexed with BIMPI in a buffer solution (pH?=?10) using Triton X-114 as surfactant and quantitatively extracted into a small volume of the surfactant-rich phase after centrifugation. Under optimized conditions (pH?=?10.0, 0.8?×?10^?4?mol?L^?1 BIMPI and 0.08 % (w/v) Triton X-114), calibration graph was linear in the range of 34.0–1,670.0 μg?L^?1. The proposed method was applied to the determination of Cd in various cigarette (tobacco) samples which gave satisfactory results.     

Molecular diversity of arbuscular mycorrhizal fungi in relation to soil chemical properties and heavy metal contamination

Abundance and diversity of arbuscular mycorrhizal fungi (AMF) associated with dominant plant species were studied along a transect from highly lead (Pb) and zinc (Zn) polluted to non-polluted soil at the Anguran open pit mine in Iran. Using an established primer set for AMF in the internal transcribed spacer (ITS) region of rDNA, nine different AMF sequence types were distinguished after phylogenetic analyses, showing remarkable differences in their distribution patterns along the transect. With decreasing Pb and Zn concentration, the number of AMF sequence types increased, however one sequence type was only found in the highly contaminated area. Multivariate statistical analysis revealed that further factors than HM soil concentration affect the AMF community at contaminated sites. Specifically, the soils’ calcium carbonate equivalent and available P proved to be of importance, which illustrates that field studies on AMF distribution should also consider important environmental factors and their possible interactions.     

Contamination by organochlorine compounds in the edible tissue of four sturgeon species from the Caspian Sea (Iran)

This study focused on accumulation of organochlorine compounds (OCs), including dichloro-diphenyl-trichloroethanes (DDTs), hexachlorobenzene (HCB), hexachlorocyclohexanes (HCHs), and polychlorinated biphenyls (PCBs) accumulation in the muscle of four sturgeon (Persian sturgeon, Acipenser persicus; Stellate sturgeon, Acipenser stellatus; Ship sturgeon, Acipenser nudiventris and Beluga sturgeon, Huso huso) from the southern Caspian Sea. The DDT group was prominent in all of the sturgeon muscle tested constituting almost half or more of the total organochlorine content. Contaminant concentration generally followed this order: DDTs>PCBs>HCHs>HCB. The OCs concentrations in Beluga sturgeon (H. huso) were the highest and over four times higher than in the next highest species (A. nudiventris). From an ecotoxicological point of view, the concentrations of OCs in experimental fishes do not reflect a comparatively clean and pollution-free environment; however, results from this study shown that the inflow of organic pollutants into the Caspian Sea has been reduced when compared with prior studies. Levels of measured OCs in sturgeon were relatively low, but the level of some OCs in some of the specimens tested exceeded the guidelines for food; therefore, the maximum allowable daily consumption rate for sturgeon from this watershed may be limited by DDTs and PCBs content for high risk populations.     

Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement.

One of the environmental issues in most regions of Iran is the large number of bottles made from poly-ethylene terephthalate (PET) deposited in domestic wastes and landfills. Due to the high volume of these bottles, more than 1 million m3 landfill space is needed for disposal every year. The purpose of this experimental study was to investigate the possibility of using PET waste in asphalt concrete mixes as aggregate replacement (Plastiphalt) to reduce the environmental effects of PET disposal. For this purpose the mechanical properties of plastiphalt mixes were compared with control samples. This study focused on the parameters of Marshall stability, flow, Marshall quotient (stability-to-flow ratio) and density. The waste PET used in this study was in the form of granules of about 3 mm diameter which would replace (by volume) a portion of the mineral coarse aggregates of an equal size (2.36-4.75 mm). In all prepared mixes the determined 6.6% optimum bitumen content was used. In this investigation, five different percentages of coarse aggregate replacement were used. The results showed that the aggregate replacement of 20% by volume with PET granules would result in a reduction of 2.8% in bulk compacted mix density. The value of flow in the plastiphalt mix was lower than that of the control samples. The results also showed that when PET was used as partial aggregate replacement, the corresponding Marshall stability and Marshall quotient were almost the same as for the control samples. According to most of specification requirement, these results introduce an asphalt mix that has properties that makes it suitable for practical use and furthermore, the recycling of PET for asphalt concrete roads helps alleviate an environmental problem and saves energy.     

Effect of the water–oil ratio on brine/surfactant/alcohol/oil systems optimized for soil remediation

The optimum middle-phase microemulsion used for remediation of oily contaminated soils is often obtained by mixing a certain amount of a surfactant/alcohol mixture with oil and adjusting the salinity concentrations at a constant water–oil ratio. Upon introduction to the subsurface, however, the system may not be in the optimum state throughout the remediation process owing to the change in the water–oil ratio. This research has attempted to investigate the effect of the water–oil ratio on the phase behavior of systems containing brine, anionic surfactant, alcohols, and different oils. By systematically changing the water–oil ratio, while keeping the others variables constant, the systems exhibited different phase behavior. The results revealed that the effect of the water–oil ratio on system behavior was significant, and analogous to that of salinity. Increasing the water–oil ratio led the system change from winsor I → winsor III → winsor II. The greater the water–oil ratio the lower the salinity required to produce the middle-phase microemulsion, but the narrower the salinity range of the three-phase region. An empirical correlation has been developed in order to predict the changes in phase behavior with the changes in water–oil ratio. This provides a useful tool for designing optimum formulations suitable for soil remediation. Received: October 5, 1999 / Accepted: March 27, 2000     

Optimized processing power and trainability of neural network in numerical modeling of Al Matrix nano composites

In this research, an experimental study of reinforcing alumina nano-particles into the aluminum alloy matrix was implemented to verify the accuracy of modeling results obtained by feed forward neural networks. Artificial neural network combined with numerical technique were used to predict the various parameters of mechanical properties such as hardness, tensile and compressive yield stress, UTS and elongation percentage. Much experimentation were taken to discover a suitable number of hidden neurons, avoid detraction from the trainability and enable feed forward neural networks to solve more complex problems. The predictions were found to be consistent with experimental measurements.     

Rapid photodegradation and detection of zolpidem over β-SnWO4 and α-SnWO4 nanoparticles: optimization and mechanism

Environmental Science and Pollution Research - We reported the tin (II) tungstate nanoparticles as the photocatalyst and sensor modifier that were synthesized via chemical precipitation reaction...     

Propagation and extinction of dust flames in narrow channels

This article has investigated the propagation and extinction of aluminum dust cloud flame in a narrow channel. The burned and burning dust particles act as heat sources and the channel walls act as heat sinks. In this method, discrete heat source has been used to analyze dust combustion in a narrow channel. Using the superposition of sources and sinks, the preheat zone temperature is predicted as an indicator of flame propagation or extinction. Dust concentration and channel width are two major parameters which affect the quenching distance and flame propagating speed. Wall temperature affects the heat loss; and by preheating the walls, quenching distance is reduced and flame propagation speed is increased.