Assessment of imidacloprid toxicity on reproductive organ system of adult male rats

In the current study it was aimed to investigate the toxicity of low doses of imidacloprid (IMI) on the reproductive organ systems of adult male rats. The treatment groups received 0.5 (IMI-0.5), 2 (IMI-2) or 8 mg IMI/kg body weight by oral gavage (IMI-8) for three months. The deterioration in sperm motility in IMI-8 group and epidydimal sperm concentration in IMI-2 and IMI-8 groups and abnormality in sperm morphology in IMI-8 were significant. The levels of testosterone (T) and GSH decreased significantly in group IMI-8 compared to the control group. Upon treatment with IMI, apoptotic index increased significantly only in germ cells of the seminiferous tubules of IMI-8 group when compared to control. Fragmentation was striking in the seminal DNA from the IMI-8 group, but it was much less obvious in the IMI-2 one. IMI exposure resulted in elevation of all fatty acids analyzed, but the increases were significant only in stearic, oleic, linoleic and arachidonic acids. The ratios of 20:4/20:3 and 20:4/18:2 were decreased and 16:1n-9/16:0 ratio was increased. In conclusion, the present animal experiments revealed that the treatment with IMI at NOAEL dose-levels caused deterioration in sperm parameters, decreased T level, increased apoptosis of germ cells, seminal DNA fragmentation, the depletion of antioxidants and change in disturbance of fatty acid composition. All these changes indicate the suppression of testicular function.     

The use of olive tree (<Emphasis Type="Italic">Olea europaea</Emphasis> L.) leaves as a bioindicator for environmental pollution in the Province of Aydın,Turkey

Introduction  

In this study, olive tree leaves, collected from 50 sampling sites throughout the Province of Aydın, Turkey, were used to estimate level of pollution by measuring Al, As, B, Ba, Ca, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sr, and Zn concentrations and calculating pollution factor (PF) values.     

Toxaphen in der Umwelt

Toxaphene is a mixture of more than 200 polychlorinated C₁₀-terpenes. Due to its persistence and long-range transport, it is distributed all over the world. Many of the components are very stable under environmental conditions, while others are easily degraded by UV-light or microorganisms. The main conversion pathway is reductive dechlorination and dehydrochlorination; oxidative degradation possibly occurs only after previous dechlorination. Accumulation especially in the aquatic environment has led in many cases to high residue levels in fish, marine mammals, and sea birds of the northern hemispere. Toxaphene is mutagenic in the Ames test and of high toxicity for fish, but few data are available on the toxicity of single components or their mode of action.     

Determination of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey

The concentrations of lead, cadmium and copper in roadside soil and plants in Elazig, Turkey were investigated. Soil samples were collected at distances of 0, 25 and 50 m from the roadside. The concentrations of lead, cadmium and copper were measured by Flame Atomic Absorption Spectrophotometry (FAAS). A slotted tube atom trap (STAT) was used to increase the sensitivity of lead and cadmium in FAAS. Lead concentrations in soil samples varied from 1.3 to 45 mg kg⁻¹ while mean lead levels in plants ranged from120 ng g⁻¹ for grape in point-4 to 866 ng g⁻¹ for apple leaves in point-2. Lead analyses showed that there was a considerable contamination in both soil and plants affected from traffic intensity. Overall level of Cd in soil samples lies between 78 and 527 ng/g while cadmium concentration in different vegetations varied in the range of 0.8–98.0 ng g⁻¹. Concentrations of copper in soil and plant samples were found in the range of 11.1–27.9 mg kg⁻¹ for soil and 0.8–5.6 mg kg⁻¹ for plants. Standard reference material (SRM) was used to find the accuracy of the results of soil analyses.     

Comparative evaluation of some macro- and micro-element and heavy metal contents in commercial fruit juices

Micro- and macro-element contents of several commercial fruit juices purchased from marked were determined by inductively coupled plasma atomic emission spectroscopy. Among the minor elements determined, Zn, Cu, Mn, Mo, Co, Cd and Ni were found to be lover. Major mineral contents of fruit juices were established as Ca, K, Mg and P. The potassium contents of fruit juices were determined at the higher levels. K contents of fruit juices ranged between 475 mg/kg (B apricot) and 1478 mg/kg (B peach). In addition while Ca contents of fruit juices change between 19.3 mg/kg (E cherry) and 81.8 mg/kg (C orange), Mg contents ranged at the levels between 23.7 mg/kg (A apricot) and 65.4 mg/kg (D orange). Generally Ca and contents of peach, orange and apricot juices that belong to A and D companies were determined at the high levels.     

Predicting field capacity,wilting point,and the other physical properties of soils using hyperspectral reflectance spectroscopy: two different statistical approaches

In this study, we examined the ability of reflectance spectroscopy to predict some of the most important soil parameters for irrigation such as field capacity (FC), wilting point (WP), clay, sand, and silt content. FC and WP were determined for 305 soil samples. In addition to these soil analyses, clay, silt, and sand contents of 145 soil samples were detected. Raw spectral reflectance (raw) of these soil samples, between 350 and 2,500-nm wavelengths, was measured. In addition, first order derivatives of the reflectance (first) were calculated. Two different statistical approaches were used in detecting soil properties from hyperspectral data. Models were evaluated using the correlation of coefficient (r), coefficient of determination (R ²), root mean square error (RMSE), and residual prediction deviation (RPD). In the first method, two appropriate wavelengths were selected for raw reflectance and first derivative separately for each soil property. Selection of wavelengths was carried out based on the highest positive and negative correlations between soil property and raw reflectance or first order derivatives. By means of detected wavelengths, new combinations for each soil property were calculated using rationing, differencing, normalized differencing, and multiple regression techniques. Of these techniques, multiple regression provided the best correlation (P?<?0.01) for selected wavelengths and all soil properties. To estimate FC, WP, clay, sand, and silt, multiple regression equations based on first(2,310)-first(2,360), first(2,310)-first(2,360), first(2,240)-first(1,320), first(2,240)-first(1,330), and raw(2,260)-raw(360) were used. Partial least square regression (PLSR) was performed as the second method. Raw reflectance was a better predictor of WP and FC, whereas first order derivative was a better predictor of clay, sand, and silt content. According to RPD values, statistically excellent predictions were obtained for FC (2.18), and estimations for WP (2.0), clay (1.8), and silt (1.63) were acceptable. However, sand values were poorly predicted (RDP?=?0.63). In conclusion, both of the methods examined here offer quick and inexpensive means of predicting soil properties using spectral reflectance data.     

Physicochemical properties of seeds of Capparis species growing wild in Turkey

While Capparis spinosa var. herbaceace (2009) seeds collected from the Mardin-midyat region contains the highest protein (22.25 %), C. spinosa var. spinosa seeds (2009) collected from the Mu?la-Milas region contained the lowest protein (18.25 %). In addition, oil contents of C. spinosa and Capparis ovata seeds changed between 27.74 to 31.09 and 28.66 to 31.40 %, respectively. Crude cellulose contents of C. spinosa and C. ovata seeds were found as 28.24 and 29.67 %, respectively. It was found that ash content of C. spinosa and C. ovata seeds were found between 2.13 and 2.23 %, respectively. Phenolic matter content of C. spinosa and C. ovata were found between 1.98 mg (GAE) and 1.76 mg (GAE), respectively. Radical activity values of C. spinosa and C. ovata were determined as 83.432 and 83.718 %, respectively.     

Determination of heavy metals in bee honey with connected and not connected metal wires using inductively coupled plasma atomic emission spectrometry (ICP–AES)

Two honey samples are taken from two parts of the same honeycomb: one that contacts to the surface of the wire and the other taken from the surface that does not contact the wires. Heavy metal contents of these two samples were determined by inductively coupled plasma atomic emission spectrometry). The Mo, Cd, Cr, Fe, Mn, Ni and Zn contents of the honey in contact with wire is higher when compared to the other. Especially, Fe and Zn contents of honey in contact with wire is much higher than the non-contact one. These values are, respectively, 190.21 and 112.76 ppm. Besides, Ni content of honey in contact with wire is approximately 50% higher.     

Physicochemical properties and mineral contents of seven different date fruit (Phoenix dactylifera L.) varieties growing from Saudi Arabia

The date (Phoenix dactylifera L.) fruits (Soukari, Soulag, Barhi, Khulas, Rozaiz, Soughi and Monaif) were evaluated with respect to some physical and chemical properties. While crude protein contents of fruits change between 1.51 % (Soulag) to 2.41 % (Soughi), crude fibre contents ranged between 1.91 % (Soukari) to 3.90 % (Barhi). Vitamin C contents of date samples changed between 971.82 mg/kg (Soughi) to 1,453.15 mg/kg (Barhi). Antioxidant activity of date fruits ranged from 80.07 IC₅₀ (Soukari) to 81.21 IC₅₀ (Soulag). The highest phenolic content was found in Khulas with a mean value of 198 mg GAE/100 g. Energy values of date fruits ranged from 3,725 kcal/kg (Soulag) to 3,870 kcal/kg (Soukari). Sucrose contents of date fruits changed between 1.02 % (Soulag) to 55.71 % (Soukari). Mineral contents of several date fruits were determined by inductively coupled plasma atomic emission spectrometry (ICP-AES). Date samples contain potassium at a range between 7,468 mg/kg (Khulas) to 9,619 mg/kg (Soulag). Phosphorus contents of fruits were found between 1,848 mg/kg (Soulag) to 3,066 mg/kg (Rozaiz) and followed by magnesium and calcium. The highest Zn (9.33 mg/kg), Cu (4.27 mg/kg) and Mn (3.26 mg/kg) were found in Rozaiz, Soukari and Barhi samples, respectively.