Photoassisted and photocatalytic degradation of sulfur mustard using TiO2 nanoparticles and polyoxometalates

The decomposition of highly toxic chemical warfare agent, sulfur mustard (bis(2-chloroethyl) sulfide or HD), has been studied by homogeneous photolysis and heterogeneous photocatalytic degradation on titania nanoparticles. Direct photolysis degradation of HD with irradiation system was investigated. The photocatalytic degradation of HD was investigated in the presence of TiO₂ nanoparticles and polyoxometalates embedded in titania nanoparticles in liquid phase at room temperature (33?±?2 °C). Degradation products during the treatment were identified by gas chromatography–mass spectrometry. Whereas apparent first-order kinetics of ultraviolet (UV) photolysis were slow (0.0091 min^?1), the highest degradation rate is obtained in the presence of TiO₂ nanoparticles as nanophotocatalyst. Simultaneous photolysis and photocatalysis under the full UV radiation leads to HD complete destruction in 3 h. No degradation products observed in the presence of nanophotocatalyst without irradiation in 3 h. It was found that up to 90 % of agent was decomposed under of UV irradiation without TiO₂, in 6 h. The decontamination mechanisms are often quite complex and multiple mechanisms can be operable such as hydrolysis, oxidation, and elimination. By simultaneously carrying out photolysis and photocatalysis in hexane, we have succeeded in achieving faster HD decontamination after 90 min with low catalyst loading. TiO₂ nanoparticles proved to be a superior photocatalyst under UV irradiation for HD decontamination.     

Spatial trends of organochlorinated pesticides,polychlorinated biphenyls,and polybrominated diphenyl ethers in Atlantic Anguillid eels

The bioaccumulation of lipophilic contaminants such as polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs), and polybrominated diphenyl ethers (PBDEs) can result in a reduction in fitness and spawner quality in eels and may be a factor in Anguillid sp. population declines. Contaminant concentrations in eels have been studied extensively in Europe, but data for American eels are severely lacking. Concentrations of PCBs, OCPs, and PBDEs were determined in American eel from eastern Canada and New York, USA, along with European eel from Belgium. Principal component analysis revealed that eels captured in the St. Lawrence estuary were a mixture of upstream migrants from the St. Lawrence River watershed, and fish captured in local tributaries. Contaminant concentrations were dependent on origin, related to the local environment, and were lower than historic values. In Canada, concentrations of OCPs and PCBs in eel tissues were below the Canadian human consumption guidelines for contaminants in fish, indicating that the current risk to consumers is low. However, concentrations of PCBs, total DDT, and mirex in eels from L. Ontario and the upper St. Lawrence R. were above Great Lakes guidelines for the protection of piscivorous predators. Concentrations of penta-BDE homologs exceeded the Canadian guideline for environmental quality in over half of the eels in this study, but concentrations of the other homolog groups were below the guideline.     

Assessing the environmental fate of chemicals of emerging concern: a case study of the polybrominated diphenyl ethers

It is suggested that assessments of chemicals of emerging concern can be rationally structured around a multistage process in which fate and risk are evaluated with increasing accuracy as new data become available. An initial tentative and approximate assessment of fate and risk can identify key data gaps and justify and direct further investigations, which progressively improve the reliability of the assessment. This approach is demonstrated for a class of chemicals, the polybrominated diphenyl ethers (PBDEs), which is of increasing concern, but about which there is presently a lack of comprehensive data on properties, sources, fate and effects. Specifically, 20 PBDE congeners are investigated using the suggested approach and research needs are identified.     

The potential use of ultrasound-assisted bleaching in removing heavy metals and pigments from soybean oil using kinetic,thermodynamic and equilibrium modeling

Environmental Science and Pollution Research - In this research, the sorption behavior (kinetic, isotherm, and thermodynamic modeling) of heavy metals (Cu (II) and Fe (II)) and pigments (carotenoid...     

Sorption-desorption of cadmium in aqueous palygorskite, sepiolite, and calcite suspensions: isotherm hysteresis

Sorption isotherms have been widely used to assess the heavy metal retention characteristics of soil particles. Desorption behavior of the retained metals, however, usually differ from that of sorption, leading to a lack of coincidence in the experimentally obtained sorption and desorption isotherms. In this study, we examine the nonsingularity of cadmium (Cd) sorption–desorption isotherms, to check the possible hysteresis and reversibility phenomena, in aqueous palygorskite, sepiolite and calcite systems. Sorption of Cd was carried out using a 24-h batch equilibration experiment with eight different Cd solution concentrations, equivalent to 20–100% of maximum sorption capacity of each mineral. Immediately after sorption, desorption took place using successive dilution method with five consecutive desorption steps. Both Cd sorption and desorption data were adequately described by Freundlich equation (0.81 < r² < 0.99). The sorption and desorption reactions, however, did not provide the same isotherms, indicating that hysteresis occurred in Cd sorption–desorption processes. The extent of hysteresis was quantified based on the differences obtained from sorption and desorption isotherms regarding the amount of Cd sorbed, the Freundlich exponent, and the Cd distribution coefficient. The results revealed that, sepiolite possessed the most hysteretic behavior among the minerals studied. Calcite showed much smaller hysteresis compared to the other two silicate clays at low Cd surface load, but its hysteresis indices significantly increased, and exceeded that of palygorskite, as the amount of Cd in the systems increased. The average amount of Cd released after five desorption steps, was 13.8%, 2.2% and 3.6% for the palygorskite, sepiolite and calcite, respectively, indicating that a large portion of Cd was irreversibly retained by the minerals.     

Source apportionment and deposition of dustfall-bound trace elements around Tabriz,Iran

Environmental Science and Pollution Research - The monthly and spatial variations of atmospheric dustfall (DF) and their elemental components were determined. The DF sampling was performed using...     

Preparation of the Mn/Co mixed oxide catalysts for low-temperature CO oxidation reaction

The Mn/Co mixed powders with various Mn/Co molar ratios were prepared by the coprecipitation method and used in low-temperature CO oxidation. The physicochemical characteristics of these powders were characterized using the Brunauer-Emmett-Teller (BET), X-ray diffraction (XRD), temperature-programmed reduction (TPR), and scanning electron microscopy (SEM) analyses. The results demonstrated that the Mn/Co molar ratio significantly affected both the textural and catalytic properties and the sample with a Mn/Co = 1:1 possessed a BET area of 123.7 m²g⁻¹ with a small mean pore size of 6.44 nm. The catalytic results revealed that the pure cobalt and manganese catalysts possessed the low catalytic activity and the pure Co catalyst is not active at temperatures lower than 140 °C. The highest catalytic activity was observed for the catalyst with a Mn/Co = 1. The obtained results showed that the incorporation of Pd into the Mn/Co catalyst significantly enhanced the catalytic activity for oxidation of carbon monoxide and the highest CO conversion was observed for the catalyst with 1 wt.% Pd and this catalyst exhibited a CO conversion of 100% at 80 ^°C.

     

Northern Rivers Ecosystem Initiative: Distribution and Effects of Contaminants

In response to a number of recommendations following the Northern Rivers Basin Studies (NRBS) contaminant program, the Northern Rivers Ecosystem Initiative (NREI) focused considerable attention on assessing contaminants from specific sources including pulp mill effluents, atmospheric transport of mercury and the Alberta oil sands operations. NRBS identified a number of major contaminants of concern including polychlorinated biphenyls, dioxins and furans, mercury and various hydrocarbons. Together, the NRBS and the NREI studies have demonstrated major declines in the levels of dioxins and furans over the last decade as pulp and paper mills have changed their process and treatment strategies in response to new Federal regulations. Polychlorinated biphenyls however, continue to be a concern for the region as their levels have not declined in fish and sediments over the course of these studies. Higher levels in sediments downstream of Grande Prairie and Hinton were identified, but the source of these contaminants remains unknown. Chlorinated pesticides were also investigated, and although toxaphene, DDT and other chlorinated organic pesticides were detected in fish tissue, they were present at very low levels. Studies on the oil sands industry in northern Alberta demonstrated limited impacts on the Athabasca River to date, although studies did identify slight to moderate impacts of natural oil seeps on fish and benthic communities in tributary streams. NREI studies also identified endocrine active compounds in the three pulp and paper mill effluents tested, but endocrine disruptive effects in wild fish were minimal. Municipal sewage effluents also contain endocrine active compounds and it is recommended that monitoring continue around these point sources.     

Review of recent advances in research on the toxicity,detection, occurrence and fate of cyclic volatile methyl siloxanes in the environment

The fate and behavior of cyclic volatile methylsiloxanes (cVMS) octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) in the environment were reviewed. We evaluated their usage data and patterns, physico-chemical properties, toxicology, partitioning and degradation, methods of detection, and concentrations. The use of cVMS as an intermediate in the formation of silicone polymers, personal care and household products has resulted in their widespread environmental exposure; they have been detected in biogas, air, water, soil, biosolid, sediment, and biota samples. Modeled and experimental results suggest that cVMS may be subject to long-range atmospheric transport, but have low potential to contaminate the Arctic. For D4 and D5, there was no evidence of trophic biomagnification in aquatic food webs, while some aquatic organisms demonstrated a high degree of bioconcentration and bioaccumulation. High concentrations of cVMS observed in indoor air and biosolids resulted from point sources. Concentrations of cVMS in water, sediment, and soil were all below their no-observed-effect-concentrations.     

Occurrence and fate of four novel brominated flame retardants in wastewater treatment plants

Four novel brominated flame retardants (NBFRs), i.e., decabromodiphenylethane (DBDPE), 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE), pentabromoethylbenzene (PBEB), and hexabromobenzene (HBB) were studied in 377 liquid samples and 288 solid samples collected from 20 wastewater treatment plants. Lagoon, primary, secondary, and advanced treatment processes were included, in order to investigate NBFR occurrence and the effects of WWTP operational conditions on NBFR removal. Median influent and effluent levels were 14 to 3,700 and 1.0 to 180 pg/L respectively, with DBDPE being the highest in both. Overall median removal efficiencies for DBDPE, BTBPE, HBB, and PBEB across all process types were 81 to 93, 76 to 98, 61 to 97, and 54 to 97 %, respectively with advanced treatment processes obtaining the best removals. NBFRs removal was related to retention time, surface loading rate, and biomass concentration. Median NBFR levels in treated biosolids were 80 to 32,000 pg/g, influenced by solids treatment processes.