Note On The Collection of Lint Fly by Wet Impingement

A combined water scrubber-impinger was used to control lint cleaner effluent from machine-stripped short staple (11/16-13/16 in.) cotton because of its high efficiency and low pressure drop. The 8 × 4 × 4 ft rectangular scrubber could handle a maximum of 8000 CFM entering air at 80°F, 20% relative humidity and 0.7 g particulates/m³ with a 1-sec residence time at a maximum pressure drop of 0.5 in. of water across the chamber. Water to the chamber’s 6 doublespray and 2 single-spray nozzle taps was supplied from recycle and makeup sources at pressures of 7.5–30 psig with total flows of 21.8–31.1 gpm depending on number of nozzle taps in use. These sprays effectively wetted the particulate- laden air and provided enough water to wash the collected particulate matter down the chamber walls. The four WR-10 nozzles used at the base of the scrubbing chamber provided fine conical spray patterns co-current with the air flow. The two sets of four F-20 nozzles used in the center portion of the chamber provided coarse flat sheet sprays perpendicular to the air flow path. Two large TR-50 nozzles at the top of the chamber provided the necessary coarse conical sprays to wash the collected particulates down the chamber wall to the trash-water separator below. Water flows through the nozzles were determined from pressure readings at each tap. Chamber pressure drop was determined by 15° inclined manometer readings taken across the chamber at the locations where the air inlet and outlet mean square velocities occurred.     

Interactions of Sulfur Dioxide with Insoluble Suspended Particulate Matter

A laboratory study was conducted of the heterogeneous catalysis of sulfur dioxide at ppm concentrations in air by insoluble particles of CaCO₂, V₂O₅, Fe₂0₃, flyash from a coal-burning power plant, MnCO₂, activated carbon, and suspended particulate matter from urban air. The investigalion was performed by utilizing a new technique for aerosol stabilization which consists of depositing the aerosol on Teflon beads in a fluidized bed. The Teflon beads with deposited aerosol particles were then packed into a flow reactor. Progress of the chemical reaction of SO₂ with deposited particles was continuously monitored by determining the SO₂ concentrations in the reactor effluent with a microcoulometer.

In this investigation, CaCOg, V₂O₅, and flyash were essentially inert to SO₂ at room temperature. Fe₂O₃, activated carbon, MnO₂, and suspended particulate matter from urban air sorbed SO₂ from air streams with up to 14.4 ppm SO₂ in air. Evidence is presented which suggests that a substantial part of the sorbed SO₂ was physically adsorbed.

Bioassay procedures which utilize pulmonary flow resistance changes in guinea pigs to monitor response to inhaled SO₂-aerosol mixtures in air have indicated the weak or non-potentiating capacity of insoluble aerosols as contrasted to soluble aerosols. Potentiating response of an aerosol appears to be strongly associated with reaction of SO₂ in a water droplet containing aerosol ions and not with physically adsorbed SO₂ on an insoluble aerosol.     

Electrostatic Precipitator Maintenance Survey

In the latter part of 1974, the TC-1 Committee of the APCA undertook a survey of four (4) major user industries of electrostatic pre-cipitators. The purpose of the survey was to establish the users’ degree of satisfaction with this equipment from an operational and a maintenance viewpoint. Specific areas of maintenance requirements were investigated as well as the nature of difficulty experienced. The 174 responses received covered user experience with 243 precipi-tators of various manufacturers. This paper reports on the results of this survey and gives the statistics derived. The conclusions reached should be beneficial to the user and the manufacturer in the areas of product improvement and maintenance.

This is the first of this type of survey handled by the TC-1 Committee, and it will be followed by Fabric Filter and Scrubber information gathering questionnaires. Problem areas so defined will be enlarged upon in future seminars planned under APCA auspices.     

Impact of Alternative Fuels on Vehicle Emissions of Greenhouse Gases

Abstract

The conversion of methane to liquid products, hydrogen (H₂), and ammonia (NH₃) was investigated experimentally using microgap discharge plasma at an environmentally friendly condition. The experimental results indicated that H₂ and NH₃ were detected as the main gas products. The highest yield and production rate of H₂ was 14.4% (v/v) and 2974.6 μmol/min, respectively, whereas the highest yield and production rate of NH₃ was 8000 ppm (v/v) and 165.1 μmol/min, respectively. Particularly, the liquid products were collected on the plate and consisted of pyrrole, 2-methyl-1,4-pentadiene, α-amidopyri-dine, 2,5-dimethylpyrrole, methylpyrazine, 1-hexyne, 1,4-heptadiene, and polycyclic organic compounds. Some liquid products were the intermediates of drug, ?avor, dye, and organic synthesis, as well as edible ?avor. The collection efficiency in mass and energy efficiency were 26.3% at once and 22.9 g/kWh, respectively. The whole reaction process was considered to be in line with green chemistry principles.     

Sustained Yield Forestry in Sweden and Russia: How Does it Correspond to Sustainable Forest Management Policy?

This paper analyzes how sustained yield (SY) forestry is defined and implemented in Sweden and Russia, two countries with different forest-industrial regimes. We first compare definitions of SY forestry in national legislation and policies. Then we study forest management planning in two large forest management units with respect to: delivered forest products and values, how the harvest level of timber is defined, where the harvest takes place, and what treatments are used to sustain desired forest products and values. In Sweden SY forestry is maximum yield based on high-input forest management, and in Russia it is forestry based on natural regeneration with minimum investments in silviculture. We conclude that how SY forestry contributes to SFM depends on the context. Finally, we discuss the consequences of SY forestry as performed in Sweden and Russia related to its ability to support diverse forest functions, as envisioned in sustainable forest management policy.     

A Molecular Genetic Assessment of Mating-System Variation in a Naturally Bird-Pollinated Shrub: Contributions from Birds and Introduced Honeybees

Abstract: Introductions of European honeybees have occurred globally, potentially affecting the natural pollination ecology of many plants. Introduced honeybees are now the most frequent visitors to the inflorescences of the self-compatible, bird-pollinated Australian shrub Grevillea macleayana and may therefore be expected to have altered the mating system. To examine the degree to which birds continue to play a role in determining the mating system of G. macleayana in this disturbed system, we compared outcrossing rates in open-pollinated inflorescences with inflorescences from which birds had been selectively excluded. Outcrossing rates were estimated from the microsatellite genotypes of over 100 seeds per population in three populations. Outcrossing rates (  t ) in open-pollinated seeds were surprisingly low (0.062–0.225) and did not vary significantly among the three populations. Nevertheless, outcrossing was significantly lower when birds were excluded (data pooled from all populations). Two lines of evidence suggest that there are temporal fluctuations in outcrossing rate and hence that birds usually have a major effect on the mating system of G. macleayana . First, at one site, t was substantially lower than estimates from an earlier study (0.06 in 1995 cf. 0.85 in 1990). Second, fixation indices based on seeds were high in all populations (  >0.68), whereas values for the established plants ( parental generation) were much lower in two of the three populations (0.06–0.32). Our findings suggest that honeybee activity is so high that the contribution of birds to pollination in G. macleayana is sometimes relatively trivial.     

Concentrations,patterns and metabolites of organochlorine pesticides in relation to xenobiotic phase I and II enzyme activities in ringed seals (Phoca hispida) from Svalbard and the Baltic Sea

The present study investigates the concentrations and patterns of organochlorine pesticides (OCPs) and their metabolites in liver and plasma of two ringed seal populations (Phoca hispida): lower contaminated Svalbard population and more contaminated Baltic Sea population. Among OCPs, p,p′-DDE and sum-chlordanes were the highest in concentration. With increasing hepatic contaminant concentrations and activities of xenobiotic-metabolizing enzymes, the concentrations of 3-methylsulfonyl-p,p′-DDE and the concentration ratios of pentachlorophenol/hexachlorobenzene increased, and the toxaphene pattern shifted more towards persistent Parlar-26 and -50 and less towards more biodegradable Parlar-44. Relative concentrations of the chlordane metabolites, oxychlordane and -heptachlorepoxide, to sum-chlordanes were higher in the seals from Svalbard compared to the seals from the Baltic, while the trend was opposite for cis- and trans-nonachlor. The observed differences in the OCP patterns in the seals from the two populations are probably related to the catalytic activity of xenobiotic-metabolizing enzymes, and also to differences in dietary exposure.     

Quantifying structural physical habitat attributes using LIDAR and hyperspectral imagery

Structural physical habitat attributes include indices of stream size, channel gradient, substrate size, habitat complexity, and riparian vegetation cover and structure. The Environmental Monitoring and Assessment Program (EMAP) is designed to assess the status and trends of ecological resources at different scales. High-resolution remote sensing provides unique capabilities in detecting a variety of features and indicators of environmental health and condition. LIDAR is an airborne scanning laser system that provides data on topography, channel dimensions (width, depth), slope, channel complexity (residual pools, volume, morphometric complexity, hydraulic roughness), riparian vegetation (height and density), dimensions of riparian zone, anthropogenic alterations and disturbances, and channel and riparian interaction. Hyperspectral aerial imagery offers the advantage of high spectral and spatial resolution allowing for the detection and identification of riparian vegetation and natural and anthropogenic features at a resolution not possible with satellite imagery. When combined, or fused, these technologies comprise a powerful geospatial data set for assessing and monitoring lentic and lotic environmental characteristics and condition.