A pyrazine based metal-organic framework for selective removal of copper from strongly acidic solutions

● pz-UiO-66 was synthesized facilely by a solvothermal method. ● Efficient capture of copper from highly acidic solution was achieved by pz-UiO-66. ● pz-UiO-66 exhibited excellent selectivity and capacity for copper capture. ● Pyrazine-N in pz-UiO-66 was shown to be the dominant adsorption site. The selective capture of copper from strongly acidic solutions is of vital importance from the perspective of sustainable development and environmental protection. Metal organic frameworks (MOFs) have attracted the interest of many scholars for adsorption due to their fascinating physicochemical characteristics, including adjustable structure, strong stability and porosity. Herein, pz-UiO-66 containing a pyrazine structure is successfully synthesized for the efficient separation of copper from strongly acidic conditions. Selective copper removal at low pH values is accomplished by using this material that is not available in previously reported metal–organic frameworks. Furthermore, the material exhibits excellent adsorption capacity, with a theoretical maximum copper uptake of 247 mg/g. As proven by XPS and FT-IR analysis, the coordination of pyrazine nitrogen atoms with copper ions is the dominant adsorption mechanism of copper by pz-UiO-66. This work provides an opportunity for efficient and selective copper removal under strongly acidic conditions, and promises extensive application prospects for the removal of copper in the treatment for acid metallurgical wastewater.     

Experimental study on pollutant movement in surf zone

The experiments on pollutant movement in surf zone were conducted on the two gentle beaches(with slope of 1:100 and 1:40, respectively), for diverse wave cases. The movement contours and direction of pollutants, under the action of regular and random waves with diverse wave amplitudes, were provided and studied in this paper. It was shown that, due to complicated hydrodynamics in surf zone, the pollutant movement state is quite complicated and different from that in pure current zone.     

H2O2处理酸性大红GR染料废水的研究

通过对废水pH值、H2O2用量、催化剂用量、反应时间、反应温度等工艺条件的考察,确定了H2O2催化氧化处理酸性大红染料废水的最佳工艺条件pH 4、H2O2用量6 mL/L、催化剂用量3 g/L、反应时间100 min、反应温度70℃.在该条件下,COD和色度的去除率分别为76.7%和99.4%;通过反应前后的紫外-可见光光谱分析表明,H2O2催化氧化处理酸性大红GR染料废水有比较好的效果,为该工艺处理酸性大红GR染料废水提供了科学依据.     

7种拟除虫菊酯农药对卤虫的急性毒性研究

为了研究7种拟除虫菊酯农药对美国大盐湖卤虫(GSL Artemia)的急性毒性效应,挑选18~24 h内孵出的卤虫,继续培养24 h后得到Ⅱ~Ⅲ龄卤虫无节幼体,将其暴露于所设浓度梯度的拟除虫菊酯溶液中进行24 h急性毒性实验,记录卤虫无节幼体在各浓度溶液中的死亡情况,并将所得数据进行Probit分析。结果表明,卤虫对不同拟除虫菊酯的敏感性相差较大。氯菊酯、氯烯炔菊酯、炔咪菊酯、胺菊酯、联苯菊酯、高效氯氟氰菊酯和溴氰菊酯对卤虫的24 h半致死浓度(24 h-LC50)分别为4.68、14.82、18.12、38.21、>100、>100和>100 mg.L-1。因此,在含有卤虫的盐水环境中,应尽量避免使用毒性较高的氯菊酯,而选择使用联苯菊酯、高效氯氟氰菊酯和溴氰菊酯等毒性较低的农药。     

An integrated method for the rapid dewatering and solidification/stabilization of dredged contaminated sediment with a high water content

• An integrated method, called PHDVPSS, was proposed for treating DCS. • The PHDVPSS method showed superior performance compared to conventional method. • Using the method, water content (%) of DCS decreased from 300 to<150 in 3 days. • The 56-day UCS from this method is 12‒17 times higher than conventional method. • Relative to PC, GGBS-MgO binder yielded greater reduction in the leachability. To more efficiently treat the dredged contaminated sediment (DCS) with a high water content, this study proposes an integrated method (called PHDVPSS) that uses the solidifying/stabilizing (S/S) agents and prefabricated horizontal drain (PHD) assisted by vacuum pressure (VP). Using this method, dewatering and solidification/stabilization can be carried out simultaneously such that the treatment time can be significantly shortened and the treatment efficacy can be significantly improved. A series of model tests was conducted to investigate the effectiveness of the proposed method. Experimental results indicated that the proposed PHDVPSS method showed superior performance compared to the conventional S/S method that uses Portland cement (PC) directly without prior dewatering. The 56-day unconfined compressive strength of DCS treated by the proposed method with GGBS-MgO as the binder is 12‒17 times higher than that by the conventional S/S method. DCS treated by the PHDVPSS method exhibited continuous decrease in leaching concentration of Zn with increasing curing age. The reduction of Zn leachability is more obvious when using GGBS-MgO as the binder than when using PC, because GGBS-MgO increased the residual fraction and decreased the acid soluble fraction of Zn. The microstructure analysis reveals the formation of hydrotalcite in GGBS-MgO binder, which resulted in higher mechanical strength and higher Zn stabilization efficiency.     

Cu/Cr co-stabilization mechanisms in a simulated Al2O3-Fe2O3-Cr2O3-CuO waste system

• Cu and Cr can be mostly incorporated into CuFe_xAl_yCr_2−x−yO₄ with a spinel structure. • Spinel phase is the most crucial structure for Cu and Cr co-stabilization. • Compared to Al, Fe and Cr are easier to be incorporated into the spinel structure. • ‘Waste-to-resource’ by thermal process at attainable temperatures can be achieved. Chromium slag usually contains various heavy metals, making its safe treatment difficult. Glass-ceramic sintering has been applied to resolve this issue and emerged as an effective method for metal immobilization by incorporating heavy metals into stable crystal structures. Currently, there is limited knowledge about the reaction pathways adopted by multiple heavy metals and the co-stabilization functions of the crystal structure. To study the Cu/Cr co-stabilization mechanisms during thermal treatment, a simulated system was prepared using a mixture with a molar ratio of Al₂O₃:Fe₂O₃:Cr₂O₃:CuO= 1:1:1:3. The samples were sintered at temperatures 600–1300°C followed by intensive analysis of phase constitutions and microstructure development. A spinel phase (CuFe_xAl_yCr_2−x−yO₄) started to generate at 700°C and the incorporation of Cu/Cr into the spinel largely complete at 900°C, although the spinel peak intensity continued increasing slightly at temperatures above 900°C. Fe₂O₃/Cr₂O₃ was more easily incorporated into the spinel at lower temperatures, while more Al₂O₃ was gradually incorporated into the spinel at higher temperatures. Additionally, sintered sample microstructures became more condensed and smoother with increased sintering temperature. Cu / Cr leachability substantially decreased after Cu/Cr incorporation into the spinel phase at elevated temperatures. At 600°C, the leached ratios for Cu and Cr were 6.28% and 0.65%, respectively. When sintering temperature was increased to 1300°C, the leached ratios for all metal components in the system were below 0.2%. This study proposes a sustainable method for managing Cu/Cr co-exist slag at reasonable temperatures.     

Effect of effluent organic matter on ozonation of bezafibrate

The influence of three effluent organic matter (EfOM) model compounds, humic acid (HA), bovine serum albumin (BSA), and sodium alginate (AGS), on the ozonation of bezafibrate (BF), a typical pharmaceutical and personal care product (PPCP), was investigated. The results show that ozonation efficiently removed BF from aqueous solution with removal efficiencies>95% within 8 min for all conditions. The reaction rate of BF decreased with increasing model compounds concentrations and the influence was more pronounced for HA and BSA, while less pronounced for AGS. Although BF concentration was significantly reduced, the degree of mineralization achieved was only approximately 11%. The addition of HA and BSA improved the mineralization of the solution, while the influence of AGS was minor. The acute toxicity of BF solution during ozonation was determined using the Luminescent bacteria test, and the toxicity exhibited an initial increase and a successive reduction. An overall decreased acute toxicity was observed with an increase of HA. The presence of BSA increased the formation rate of toxicity intermediates and resulted in inhibition peak forward.     

Characteristics of geological hazards in South China coastal areas and impact on regional sustainable development

Prevention and treatment of geological hazards is important for the sustainable development of human society. Surface geological hazards alone caused direct economic losses of ¥3.47 billion, with 768 deaths and 785 injuries in Guangdong Province, South China, from 1994 to 2005. The major factors causing geological hazards can be categorised into three types: geo-environmental, climatic-meteorological and human activity. Accompanied by rapid economic development and population growth, human activities can cause geological hazards that are as serious as those caused by natural factors. The authors propose some suggestions for prevention and treatment of geological hazards to achieve sustainable development on the Chinese coast.     

Different responses of photosynthesis and flow cytometric signals to iron limitation and nitrogen source in coastal and oceanic Synechococcus strains (Cyanophyceae)

Iron plays an important role in marine primary productivity, and Synechococcus species as major contributors to the total photosynthetic biomass in the world’s oceans might be limited by iron supply in some regions. The present study aimed to compare the photosynthesis and flow cytometric signals of four Synechococcus strains grown under different iron concentrations with either nitrate or ammonium as the sole nitrogen source. Two oceanic strains were much more sensitive to iron limitation than two coastal strains. The inhibition of iron limitation on the growth, maximal PSII photochemical yield, maximal rate of relative electron transport and photochemical quenching of the two oceanic strains was higher than for their coastal counterparts. Under iron limitation condition, the connectivity factor between individual photosynthetic units (ρ) increased for the two coastal strains, while decreased for the two oceanic strains. Furthermore, iron limitation accelerated the Q _A re-oxidation of the two oceanic strains and the PQ pool re-oxidation of the two coastal strains. Under iron limitation condition, the cell size of the two coastal strains and intracellular pigment concentrations of the two oceanic strains decreased, while the side light scatter/front light scatter (SS/FS) ratio of the two coastal strains increased. In contrast to iron limitation, nitrogen source only marginally affected the photosynthesis of the four Synechococcus strains. Ammonium enhanced the growth of the two coastal strains under iron-replete condition. For the two oceanic strains, ammonium increased their cell size and decreased their SS/FS ratio and intracellular pigment concentrations under iron-deplete and iron-replete conditions.     

经典化学法结合pH/ORP自控系统处理电镀废水的工程应用

电镀废水是我国三大工业污染废水之一,该废水污染严重、水质复杂、水量大。针对该废水的特点,实行清污分流,各类废水先预处理再综合处理的原则,并采用经典化学法结合pH/ORP自控系统处理技术,废水经处理后可达GB8978-1996《污水综合排放标准》一级排放标准。