单兵装备系统人机工效仿真评价技术初步研究

本文结合士兵系统的发展概况,阐述了单兵装备人机工程仿真评价技术研究的重要性,并总结了目前的研究进展情况,进而重点介绍单兵装备人机工效仿真评价系统的最新研究成果,首次在三维仿真环境和基础数据库的支持下对单兵装备系统的可视性、可达性、舒适性等指标进行综合研究和评价。     

风险管理国际标准解读

1 前言 "风险无处不在".最近几年,全球出现了新兴的管理理念--风险管理,并受到国际社会的普遍关注.风险管理是一个常识性方法论,为组织内部决策指出了明确的方向和途径.     

基于粒间接触关系的饱和砂土液化特性研究∗

为了研究饱和砂土的液化机理,通过等体积加载的方式建立了循环荷载下饱和砂土动力响应的颗粒流计算模型,研究了饱和砂土在不同围压和加载幅值下的动力响应,探讨了颗粒间力链的发展特性,并从Shannon 熵、Boltzmann 熵以及Clausius 熵的基本关系入手,建立基于粒间接触力链的饱和砂土颗粒熵计算方法,分析了颗粒熵发展特性。结果表明：饱和砂土初始总力链主要受围压的影响,围压越大,初始总力链越多;循环荷载下饱和砂土颗粒间力链总数逐渐降低,且强力链持续向中、弱力链转换;循环荷载下饱和砂土颗粒熵表现出先升高后降低的二阶段特性,围压和加载幅值对颗粒熵峰值无明显影响,各工况的颗粒熵峰值均为0.92;定义颗粒熵峰值为相变颗粒熵,相变颗粒熵时的饱和砂土表现出固液临界态的力学特征,指示了饱和砂土由固态向往返液化状态转变的临界点。     

铜陵市资源利用与经济增长关系分析

资源利用与经济增长之间的关系是资源与环境经济学研究的重要领域。以安徽省铜陵市为例,尝试运用物质流分析方法以及最新发展的自回归分布滞后模型（ARDL）对铜陵市1990~2008年资源利用和实际GDP二者关系进行检验和分析。采用了物质流分析指标中直接物质投入来表征区域资源利用量。ARDL边界检验结果表明了资源利用和经济增长间存在稳定的长期均衡关系。进一步通过ARDL-ECM模型分析了区域经济增长对资源利用长期弹性系数和短期弹性系数,并揭示出资源利用对经济增长的短期和长期因果关系。研究结果表明当前资源投入在一定程度上拉动了铜陵经济增长。同时还对铜陵经济增长和资源保护战略提出了政策建议     

Toward better understanding and feasibility of controlling greenhouse gas emissions from treatment of industrial wastewater with activated sludge

Wastewater treatment plants (WWTPs) have been recognized as important sources for anthropogenic greenhouse gas (GHG) emission. The objective of the study was to thoroughly investigate a typical industrial WWTP in southern Taiwan in winter and summer which possesses the emission factors close to those reported values, with the analyses of emission factors, mass fluxes, fugacity, lab-scale in situ experiments, and impact assessment. The activated sludge was the important source in winter and summer, and nitrous oxide (N₂O) was the main contributor (e.g., 57 to 91 % of total GHG emission in a unit of kg carbon dioxide-equivalent/kg chemical oxygen demand). Albeit important for the GHGs in the atmosphere, the fractional contribution of the GHG emission to the carbon or nitrogen removal in wastewater treatment was negligible (e.g., less than 1.5 %). In comparison with the sludge concentration or retention time, adjusting the aeration rate was more effective to diminish the GHG emission in the activated sludge without significantly affecting the treated water quality. When the aeration rate in the activated sludge simulation was reduced by 75 %, the mass flux of N₂O could be diminished by up to 53 % (from 9.6 to 4.5 mg/m²-day). The total emission in the WWTP (including carbon dioxide, methane, and N₂O) would decrease by 46 % (from 0.67 to 0.36 kg CO₂-equiv/kg COD). However, the more important benefit of changing the aeration rate was lowering the energy consumption in operation of the WWTP, as the fractional contribution of pumping to the total emission from the WWTP ranged from 46 to 93 % within the range of the aeration rate tested. Under the circumstance in which reducing the burden of climate change is a global campaign, the findings provide insight regarding the GHG emission from treatment of industrial wastewater and the associated impact on the treatment performance and possible mitigation strategies by operational modifications.

     

In situ removal of copper from sediments by a galvanic cell

This study dealt with in situ removal of copper from sediments through an electrokinetic (EK) process driven by a galvanic cell. Iron (Fe) and carbon (C) were placed separately and connected with a conductive wire. Polluted sediments were put between them and water was filled above the sediments. The galvanic cell was thus formed due to the different electrode potentials of Fe and C. The cell could remove the pollutants in the sediments by electromigration and/or electroosmosis. Results showed that a weak voltage less than 1V was formed by the galvanic cell. The voltage decreased with the increase of time. A slight increase of sediment pH from the anode (Fe) to the cathode (C) was observed. The presence of supernatant water inhibited the variation of sediment pH because H(+) and OH(-) could diffuse into the water. The removal of copper was affected by the sediment pH and the distribution of electrolyte in sediment and supernatant water. Lower pH led to higher removal efficiency. More electrolyte in the sediment and/or less electrolyte in the supernatant water favored the removal of copper. The major removal mechanism was proposed on the basis of the desorption of copper from sediment to pore solution and the subsequent electromigration of copper from the anode to the cathode. The diffusion of copper from sediment to supernatant water was negligible.     

针铁矿对Pb~(2+)的吸附特征及影响因素研究

通过恒温振荡平衡法研究了Pb~(2+)在针铁矿上的等温吸附和吸附动力学特征,探讨了吸附的影响因素.结果表明:(1)随Pb~(2+)平衡浓度和pH的增大,针铁矿对Pb~(2+)的吸附量逐渐增大.(2)针铁矿对Pb~(2+)的等温吸附可用Freundlich和Langmuir方程较好地拟合.(3)在相同温度和pH下,随离子强度的提高,针铁矿对Pb~(2+)的吸附量增大.(4)在相同离子强度和pH下,针铁矿对Pb~(2+)的吸附量总体随温度升高而增大.针铁矿对Pb~(2+)的吸附是自发进行的吸热反应.(5)针铁矿吸附Pb~(2+)的过程可分为初始的快吸附和随后的慢吸附2个阶段.pH影响吸附反应快慢,随pH增大吸附速率增大;随着pH的增大,达到平衡吸附的时间缩短.吸附动力学方程用Elovich方程拟合最佳.     

无银催化-分光光度法测定COD的研究

以XS-LP为催化剂,探讨了改进的无银催化HACH法测定污水中COD的系列条件实验。结果表明:在药剂A,B的投配比为1∶2,投加总量为12 g/L的条件下,其准确度、精密度与国标法有较好的可比性,分别小于10%和3%;对实际废水的测量结果与国标回流法的相关系数分别高达0.9951和0.9874,可满足一般环境检测技术规范要求。     

表面活性剂清洗处理重度石油污染土壤

为了优化表面活性剂清洗处理重度石油污染土壤的方法和具体洗脱条件参数,采集山东省东营市胜利油田污染土壤,研究了阴离子-非离子混合表面活性剂对该土壤中石油类污染物的去除效果。应用化学热洗原理,主要考查了表面活性剂配比、投加量、清洗温度及清洗助剂对去除效果的影响。实验得到的清洗处理最佳条件为：使用LAS与TX-100质量比为8∶2的组合表面活性剂,总表面活性剂浓度为3 g/L,助剂硅酸钠浓度为5 g/L,75℃条件下搅拌1 h。清洗后土壤含油量从20%下降到4.6%,去除率达到76.9%。废水回用实验表明,清洗处理的废水对土壤中石油烃类物质仍有一定的去除效果。废水回用比从30%到100%时,对土壤中石油烃的去除率都可达到55%以上。对废水进行二次回用时仍能去除18.8%的污染物。     

超细粉煤灰基成型吸附剂的动态吸附实验

以粉煤灰为原料制备成型吸附剂,对水溶液中亚甲基蓝和Cr⁶⁺进行动态吸附研究,绘制穿透曲线,利用Origin软件对实验数据分析处理,得出穿透曲线的通式C_t=A₁－A₂〖〗1+(t/t₀)^p+A₁。结果表明,初始浓度C₀=25 mg/L,填料高度不同时,达到穿透点的时间随填料高度的增加而增加;填料高度h=200 mm,初始浓度不同时,达到穿透点的时间随初始浓度的增加而减小;该吸附剂对有机染料和重金属离子均有较好的吸附性能;穿透曲线通式的回归线性相关系数表明,该通式可很好地反映超细粉煤灰成型吸附剂的动态吸附过程。