Principles of microbial PAH-degradation in soil

Interest in the biodegradation mechanisms and environmental fate of polycyclic aromatic hydrocarbons (PAHs) is motivated by their ubiquitous distribution, their low bioavailability and high persistence in soil, and their potentially deleterious effect on human health. Due to high hydrophobicity and solid-water distribution ratios, PAHs tend to interact with non-aqueous phases and soil organic matter and, as a consequence, become potentially unavailable for microbial degradation since bacteria are known to degrade chemicals only when they are dissolved in water. As the aqueous solubility of PAHs decreases almost logarithmically with increasing molecular mass, high-molecular weight PAHs ranging in size from five to seven rings are of special environmental concern. Whereas several reviews have focussed on metabolic and ecological aspects of PAH degradation, this review discusses the microbial PAH-degradation with special emphasis on both biological and physico-chemical factors influencing the biodegradation of poorly available PAHs.     

Recycling EDTA solutions used to remediate metal-polluted soils

The objective of this research was to investigate the recycling of ethylenediamine-tetraacetic acid (EDTA) used for the removal of trace metals from contaminated soils. We successfully used Na2S combined with Ca(OH)2 to precipitate the trace metals allowing us to recycle the EDTA. The results of batch and column leaching experiments show that both Ca-EDTA and Na-EDTA are powerful chelating agents with a similar soil remediation potential. The major advantage of Ca-EDTA is the preservation of soil organic matter. We found that Na2S was capable of separating the metals Cd, Cu and Pb from EDTA; however, the precipitation of Zn required the addition of Ca(OH)2. After reusing the reclaimed EDTA seven times, over a 14-day period, EDTA reagent losses ranged from 19.5% to 23.5%. Successive washing cycles enhanced the removal of trace metals from contaminated soils. The metal sulfide precipitates contain high concentrations of metals and could potentially be recycled.     

Modelling the transport of suspended particulate matter by the Rhone River plume (France). Implications for pollutant dispersion

A model to simulate the transport of suspended particulate matter by the Rhone River plume has been developed. The model solves the 3D hydrodynamic equations, including baroclinic terms and a 1-equation turbulence model, and the suspended matter equations including advection/diffusion of particles, settling and deposition. Four particle classes are considered simultaneously according to observations in the Rhone. Computed currents, salinity and particle distributions are, in general, in good agreement with observations or previous calculations. The model also provides sedimentation rates and the distribution of different particle classes over the sea bed. It has been found that high sedimentation rates close to the river mouth are due to coarse particles that sink rapidly. Computed sedimentation rates are also similar to those derived from observations. The model has been applied to simulate the transport of radionuclides by the plume, since suspended matter is the main vector for them. The radionuclide transport model, previously described and validated, includes exchanges of radionuclides between water, suspended matter and bottom sediment described in terms of kinetic rates. A new feature is the explicit inclusion of the dependence of kinetic rates upon salinity. The model has been applied to 137Cs and 239,240Pu. Results are, in general, in good agreement with observations.     

Clonal variation in heavy metal accumulation and biomass production in a poplar coppice culture. II. Vertical distribution and phytoextraction potential

Short rotation coppice cultures (SRC) are intensively managed, high-density plantations of multi-shoot trees. In April 1996, an SRC field trial with 17 different poplar clones was established in Boom (Belgium) on a former waste disposal site. In December 1996 and January 2001, all shoots were cut back to a height of 5 cm to create a coppice culture. For six clones, wood and bark were sampled at the bottom, middle and top of a shoot in August and November 2002. No significant height effect of metal concentration was found, but for wood, metal concentrations generally increased toward the top of the shoot in August, and decreased toward the top of the shoot in November. Phytoextraction potential of a clone was primarily determined by metal concentration and by biomass production. Shoot size and number of shoots per stool were less important, as a high biomass production could be achieved by producing a few large shoots or many smaller shoots. Clone Fritzi Pauley accumulated 1.4 kg ha(-1) of Al over two years; Wolterson and Balsam Spire showed a relatively high accumulation of Cd and Zn, i.e. averaging, respectively 47 and 57 g ha(-1) for Cd and 2.4 and 2.0 kg ha(-1) for Zn over two years.     

In-field measurements of PCDD/F emissions from domestic heating appliances for solid fuels

Within this project the emissions into the atmosphere of polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) of 30 domestic heating appliances in Austrian households were tested. The appliances were single stoves (kitchen stove, continuous burning stove and tiled stove) and central heating boilers for solid fuels up to a nominal heat input of 50 kW. A main objective of this survey was to determine the PCDD/F emissions of domestic heating units under routine conditions. Therefore, the habitual combustion conditions used by the operators were not influenced. The original fuels and lightning supports were used and the operation of the units was carried out by the householders according to their usual practice. The data obtained were used to calculate in-field PCDD/F-emission factors. Most of the appliances have shown PCDD/F emissions within a concentration range of 0.01-0.3 ng TEQ/MJ. Modern fan-assisted wood heating boilers with afterburning and units for continuously burning of wood chips and wood pellets had the lowest emissions. High emissions were caused by unsuitable heating habits such as combustion of wastes and inappropriate operation of the appliances. There were only small differences between single stoves and central heating boilers or between wood and coal-fired appliances. The emission factors calculated are higher than those cited in literature, which are mainly derived from trials on test stands under laboratory conditions.     

Isotopic characterisation of lead in contaminated soils from the vicinity of a non-ferrous metal smelter near Plovdiv, Bulgaria

Soil samples from the vicinity of a non-ferrous metal smelter near Plovdiv, Bulgaria contained very high concentrations of cadmium, lead and zinc (up to 140, 4900 and 5900 mg kg(-1), respectively). A roadside soil in a relatively uncontaminated area also contained high concentrations of the same metals (24, 1550 and 1870 mg kg(-1), respectively) indicating that the transport of ores could be a source of contamination. Even though the lead isotope ratios in all the samples fell within a very narrow range (for example, 1.186-1.195 for (206)Pb/(207)Pb), the samples could be differentiated into three distinct groups: ores ((206)Pb/(207)Pb and (208)Pb/(207)Pb ratios of 1.1874-1.1884 and 2.4755-2.4807, respectively), current deposition (1.1864 and 2.4704-2.4711, respectively) and local background (1.1927-1.1951 and 2.4772-2.4809, respectively). Although most of the current deposition has its origin in the ores used at the smelter, up to 12% could be from other sources such as petrol lead.     

Distribution of organotin compounds in tissues of mussels Mytilus edulis and clams Mya arenaria

Concentrations and composition of butyltin (BT) and phenyltin (PT) compounds were compared in tissues of mussels Mytilus edulis and clams Mya arenaria collected from the Mersey Estuary. Tributyltin (TBT) concentrations were consistently highest in digestive gland and low in muscular tissues such as siphons (Mya) and adductor muscle (Mytilus). Lowest concentrations were found in the periostracum surrounding the siphons of Mya. Ratios of monobutyltin (MBT), dibutyltin (DBT) and TBT to total BT content of Mytilus tissues were in the ranges 25-34%, 21-28% and 44-51%, respectively. Much higher proportions of TBT:total BT were characteristic of Mya (>80% in the digestive gland, remaining tissue and gonad) implying that slow degradation rates account for the relatively high levels of TBT in this species. TPT was the only phenyltin compound detected (albeit at relatively low levels), and, like TBT, was present in highest concentrations in the digestive gland of clams--suggesting an important dietary component in the accumulation of OTs in these bivalves.     

Accumulation of trinitrotoluene (TNT) in aquatic organisms: part 2--Bioconcentration in aquatic invertebrates and potential for trophic transfer to channel catfish (Ictalurus punctatus)

The potential of TNT to accumulate in aquatic organisms was assessed by determining bioconcentration factors for TNT and TNT biotransformation products using two benthic invertebrates (Chironomus tentans and Lumbriculus variegatus), and by determining the bioaccumulation factor of TNT and TNT biotransformation products due to TNT exposure via feeding for channel catfish (Ictalurus punctatus). In all three species, TNT was rapidly biotransformed resulting in minimal accumulation. The bioconcentration factors for parent TNT ranged from 3 to 4 ml g(-1) for the invertebrates studied, while the TNT bioaccumulation factor for catfish via oral exposure of food pellets was 2.4x10(-5) g g(-1) based on the concentration of TNT in the food pellet. As indicated by this small bioaccumulation factor, TNT accumulation in channel catfish through trophic transfer would be negligible compared to aqueous exposure (previously reported BCF of 0.79 ml g(-1)). TNT extractable biotransformation products accumulated to a greater degree than parent TNT for all three species. In addition, a large fraction of the radioactivity within all three species resisted solvent extraction. The highest bioconcentration factors occurred in L. variegatus with extractable radioactivity measuring 76 ml g(-1) and total radioactivity measuring 216 ml g(-1). Because the bioaccumulation of TNT is very low compared to the bioaccumulation of its biotransformation products, further research including identifying and determining the relative toxicities of these biotransformation products is necessary to fully evaluate the environmental risk posed by exposure to TNT.     

The interaction effects of binary mixtures of benzene and toluene on the developing heart of medaka (Oryzias latipes)

The United States Environmental Protection Agency (USEPA) has pursued the estimation of risk of adverse health effects from exposure to chemical mixtures since the early 1980s. Methods used to calculate risk estimates of mixtures were often based on single chemical information that required assumptions of dose-addition or response-addition and did not consider possible changes in response due to interaction effects among chemicals. Full factorial designs for laboratory studies can produce interactions information, but these are expensive to perform and may not provide the information needed to evaluate specific environmentally relevant mixtures. In this research, groups of Japanese medaka (Oryzias latipes) embryos were exposed to binary mixtures of benzene and toluene as well as to each of these chemicals alone. Endpoint specific dose-response models were built for the hydrocarbon mixture under an assumption of dose-additivity, using the single chemical dose-response information on benzene and toluene. The endpoints included heart rate, heart rate progression, and lethality. Results included a synergistic response for heart rate at 72 h of development, and either additivity or antagonism for all other endpoints at 96 h of development. This work uses an established statistical method to evaluate the toxicity of an environmentally relevant mixture to ascertain whether interaction effects are occurring, thus providing additional information on toxicity.     

Detection of organic pollutants in sandy soils via TDR and eigendecomposition

In this study, organic pollutants in sandy soils are detected using a time domain relectrometry (TDR) probe system and eigendecomposition technique. As a demonstration, four types of organic fluids (motor oil, diesel oil, methanol and ethanol) were examined. Samples were prepared with different combinations of deionized water and organic fluid contents. For each experiment, reflected signals were captured by an oscilloscope, and their characteristics were identified using eigendecomposition technique. Autoregressive modeling and singular value decomposition methods were utilized for calculating the eigenvalues. The most significant eigenvalues were then identified based on their relative magnitude. Experimental results indicated that the presented system is sensitive to both water and pore fluid organic contents. For saturated conditions, signature curves were determined for identification of organic and/or water contents in soil pore fluids.