Getting caught up in the game: managing non-formal dynamics in the remediation of contaminated sediments in Oslo harbor

This study aims at describing, analyzing and evaluating the relation between management styles and process dynamics of a complex planning process confronted with unexpected dynamics. The development of an aquatic disposal site for dredged contaminated sediments in Oslo was managed by a project management style focused on timely and cost-effective implementation. Coupling the remediation project with another infrastructural project and the actual construction of the site led to unexpected dynamics in terms of resistance and controversy. Project management had difficulties in adjusting its style accordingly, resulting in even more delay and resistance. Managing complex planning projects requires a style suitable to the characteristics of the project and the capability of adjusting it to changing circumstances. The paper concludes with some explanations why it is difficult to change management styles in complex planning and implementation processes and complexity-embracing approaches to deal with this.     

Opponents,waverers or supporters: the influence of place-attachment dimensions on local residents' acceptance of a planned biosphere reserve in Austria

A supportive attitude of residents towards protected areas is crucial for successful implementation and management, particularly in densely populated regions such as Central Europe. While previous studies have revealed that emotional and cultural drivers, as well as information level and group membership, can influence attitudes towards protected areas, the effect of place-attachment dimensions remains unclear. A postal survey among local residents (N = 460) explored factors influencing attitudes towards the Lungau (-Nockberge) Biosphere Reserve in Austria before its official recognition. Results indicated societal support throughout all socio-demographic strata. A logistic regression showed that, besides socio-demographics and information level, place attachment had a significant influence on the acceptance of the biosphere reserve. Supporters and opponents showed both high place identity and dependence, while waverers scored low on these dimensions. Results indicate that place attachment is relevant for the design of participatory processes as well as for developing management policies for biosphere reserves.     

Augmenting Watershed Model Calibration with Incorporation of Ancillary Data Sources and Qualitative Soft Data Sources

Watershed simulation models such as the Soil & Water Assessment Tool (SWAT) can be calibrated using “hard data” such as temporal streamflow observations; however, users may find upon examination of model outputs, that the calibrated models may not reflect actual watershed behavior. Thus, it is often advantageous to use “soft data” (i.e., qualitative knowledge such as expected denitrification rates that observed time series do not typically exist) to ensure that the calibrated model is representative of the real world. The primary objective of this study is to evaluate the efficacy of coupling SWAT‐Check (a post‐evaluation framework for SWAT outputs) and IPEAT‐SD (Integrated Parameter Estimation and Uncertainty Analysis Tool‐Soft & hard Data evaluation) to constrain the bounds of soft data during SWAT auto‐calibration. IPEAT‐SD integrates 59 soft data variables to ensure SWAT does not violate physical processes known to occur in watersheds. IPEAT‐SD was evaluated for two case studies where soft data such as denitrification rate, nitrate attributed from subsurface flow to total discharge ratio, and total sediment loading were used to conduct model calibration. Results indicated that SWAT model outputs may not satisfy reasonable soft data responses without providing pre‐defined bounds. IPEAT‐SD provides an efficient and rigorous framework for users to conduct future studies while considering both soft data and traditional hard information measures in watershed modeling.     

Resolving the interactions between population density and air pollution emissions controls in the San Joaquin Valley, USA

The effectiveness of emissions control programs designed to reduce concentrations of airborne particulate matter with an aerodynamic diameter < 2.5 microm (PM2.5) in California's San Joaquin Valley was studied in the year 2030 under three growth scenarios: low, medium, and high population density. Base-case inventories for each choice of population density were created using a coupled emissions modeling system that simultaneously considered interactions between land use and transportation, area source, and point source emissions. The ambient PM2.5 response to each combination of population density and emissions control was evaluated using a regional chemical transport model over a 3-week winter stagnation episode. Comparisons between scenarios were based on regional average and population-weighted PM2.5 concentrations. In the absence of any emissions control program, population-weighted concentrations of PM2.5 in the future San Joaquin Valley are lowest undergrowth scenarios that emphasize low population density. A complete ban on wood burning and a 90% reduction in emissions from food cooking operations and diesel engines must occur before medium- to high-density growth scenarios result in lower population-weighted concentrations of PM2.5. These trends partly reflect the fact that existing downtown urban cores that naturally act as anchor points for new high-density growth in the San Joaquin Valley are located close to major transportation corridors for goods movement. Adding growth buffers around transportation corridors had little impact in the current analysis, since the 8-km resolution of the chemical transport model already provided an artificial buffer around major emissions sources. Assuming that future emissions controls will greatly reduce or eliminate emissions from residential wood burning, food cooking, and diesel engines, the 2030 growth scenario using "as-planned" (medium) population density achieves the lowest population-weighted average PM2.5 concentration in the future San Joaquin Valley during a severe winter stagnation event. Implications: The San Joaquin Valley is one of the most heavily polluted air basins in the United States that are projected to experience strong population growth in the coming decades. The best plan to improve air quality in the region combines medium- or high-density population growth with rigorous emissions controls. In the absences of controls, high-density growth leads to increased population exposure to PM2.5 compared with low-density growth scenarios (urban sprawl).     

Agricultural pesticide residues of farm runoff in the Okanagan Valley, British Columbia, Canada

The objectives of this study were to determine environmental occurrence and concentrations of selected currently-used-pesticides and some transformation products in agricultural farms in the Okanagan Valley (OKV), and to conduct a simple risk assessment of environmental pesticides levels detected in OKV on non-target aquatic organisms. The OKV is the tree fruit country of the Province of British Columbia where considerable amount of pesticides are applied annually. Water, sediment and soil samples were collected at eleven sites in early June and late September following rainfall events and/or extended periods of irrigation from drainage ditches and/or from small streams. Undisturbed reference sites were also sampled. Study results showed that forty of the eighty chemicals analyzed, including organochlorine, nitrogen-containing and organophosphate pesticides commonly used for OKV crops, were detected in runoff and small stream water samples. Among which, endosulfan-sulfate was the most frequently detected chemical. Also, azinophos-methyl (0.699-25.5 ng/L), diazinon (0.088-214 ng/L) exceeded, and α-, β- endosulfan, endosulfan sulphate approached the guidelines for the protection of aquatic life.     

Occurrence and congener specific profiles of polybrominated diphenyl ethers and their hydroxylated and methoxylated derivatives in breast milk from Catalonia

The presence of polybrominated diphenyl ethers (PBDEs) from mono to hepta brominated and 11 hydroxylated (OH-) and methoxylated (MeO-) PBDEs was examined in 37 breast milk samples collected from 11 mothers living in Barcelona. An extraction method based on accelerated solvent extraction followed by gas chromatography coupled to high resolution mass spectrometry was used to inequivocally identify all target compounds at the low pg g(-1) lw level. Data obtained were examined for absolute and relative concentrations and specific PBDE, OH- and MeO-PBDE congener patterns. Sigma PBDE concentration ranged between 1,161 and 1,372,797 pg g(-1) lw and BDEs 47, 99, 100, 153 and 183 accounted for more than 80% of the total PBDEs. All tri and tetra OH- and MeO-PBDEs compounds were detected at levels between 6 and 14,984 pg g(-1)lw. The median ratio OH/PBDE and MeO-PBDEs/PBDEs was from 2.9% to 1.6%, respectively, suggesting either that PBDE metabolism to OH- and MeO- derivatives is not an important degradation route in humans or either OH- and MeO-PBDEs are rapidly excreted. No significant correlation was observed between PBDEs and OH- and MeO-PBDE, although OH- and OMe-PBDEs co-occurred in mothers' milk (R(2)=0.5349). According to the daily intake of PBDEs and OH- and MeO-PBDEs, which was between 0.47 and 363 ng d(-1) (excluding a smoking donor), potential health risks associated with these compounds are assessed.     

Rapid measurement of emissions from military aircraft turbine engines by downstream extractive sampling of aircraft on the ground: Results for C-130 and F-15 aircraft

Aircraft emissions affect air quality on scales from local to global. More than 20% of the jet fuel used in the U.S. is consumed by military aircraft, and emissions from this source are facing increasingly stringent environmental regulations, so improved methods for quickly and accurately determining emissions from existing and new engines are needed. This paper reports results of a study to advance the methods used for detailed characterization of military aircraft emissions, and provides emission factors for two aircraft: the F-15 fighter and the C-130 cargo plane. The measurements involved outdoor ground-level sampling downstream behind operational military aircraft. This permits rapid change-out of the aircraft so that engines can be tested quickly on operational aircraft. Measurements were made at throttle settings from idle to afterburner using a simple extractive probe in the dilute exhaust. Emission factors determined using this approach agree very well with those from the traditional method of extractive sampling at the exhaust exit. Emission factors are reported for CO₂, CO, NO, NO_x, and more than 60 hazardous and/or reactive organic gases. Particle size, mass and composition also were measured and are being reported separately. Comparison of the emissions of nine hazardous air pollutants from these two engines with emissions from nine other aircraft engines is discussed.     

Atmospheric chemistry of perfluorobutenes (CF3CFCFCF3 and CF3CF2CFCF2): Kinetics and mechanisms of reactions with OH radicals and chlorine atoms,IR spectra,global warming potentials,and oxidation to perfluorocarboxylic acids

Relative rate techniques were used to determine k(Cl + CF₃CFCFCF₃) = (7.27 ± 0.88) × 10^?12, k(Cl + CF₃CF₂CFCF₂) = (1.79 ± 0.41) × 10^?11, k(OH + CF₃CFCFCF₃) = (4.82 ± 1.15) × 10^?13, and k(OH + CF₃CF₂CFCF₂) = (1.94 ± 0.27) × 10^?12 cm³ molecule^?1 s^?1 in 700 Torr of air or N₂ diluent at 296 K. The chlorine atom- and OH radical-initiated oxidation of CF₃CFCFCF₃ in 700 Torr of air gives CF₃C(O)F in molar yields of 196 ± 11 and 218 ± 20%, respectively. Chlorine atom-initiated oxidation of CF₃CF₂CFCF₂ gives molar yields of 97 ± 9% CF₃CF₂C(O)F and 97 ± 9% COF₂. OH radical-initiated oxidation of CF₃CF₂CFCF₂ gives molar yields of 110 ± 15% CF₃CF₂C(O)F and 99 ± 8% COF₂. The atmospheric fate of CF₃CF₂C(O)F and CF₃C(O)F is hydrolysis to give CF₃CF₂C(O)OH and CF₃C(O)OH. The atmospheric lifetimes of CF₃CFCFCF₃ and CF₃CF₂CFCF₂ are determined by reaction with OH radicals and are approximately 24 and 6 days, respectively. The contribution of CF₃CFCFCF₃ and CF₃CF₂CFCF₂ to radiative forcing of climate change will be negligible.     

Toxic masking and synergistic modulation of the estrogenic activity of chemical mixtures in a yeast estrogen screen (YES)

Background, aim and scope

Estrogenic and non-estrogenic chemicals typically co-occur in the environment. Interference by non-estrogenic chemicals may confound the assessment of the actual estrogenic activity of complex environmental samples. The aim of the present study was to investigate whether, in which way and how seriously the estrogenic activity of single estrogens and the observed and predicted joint action of estrogenic mixtures is influenced by toxic masking and synergistic modulation caused by non-estrogenic chemical confounders.

Materials and methods

The yeast estrogen screen (YES) was adapted so that toxicity and estrogenicity could be quantified simultaneously in one experimental run. Mercury, two organic solvents (dimethyl sulfoxide (DMSO) and 2,4-dinitroaniline), a surfactant (LAS-12) and the antibiotic cycloheximide were selected as toxic but non-estrogenic test chemicals. The confounding impact of selected concentrations of these toxicants on the estrogenic activity of the hormone 17ß-estradiol was determined by co-incubation experiments. In a second step, the impact of toxic masking and synergistic modulation on the predictability of the joint action of 17ß-estradiol, estrone and estriol mixtures by concentration addition was analysed.

Results

Each of the non-estrogenic chemicals reduced the apparent estrogenicity of both single estrogens and their mixtures if applied at high, toxic concentrations. Besides this common pattern, a highly substance- and concentration-dependent impact of the non-estrogenic toxicants was observable. The activity of 17ß-estradiol was still reduced in the presence of only low or non-toxic concentrations of 2,4-dinitroaniline and cycloheximide, which was not the case for mercury and DMSO. A clear synergistic modulation, i.e. an enhanced estrogenic activity, was induced by the presence of slightly toxic concentrations of LAS-12. The joint estrogenic activity of the mixture of estrogens was affected by toxic masking and synergistic modulation in direct proportion to the single estrogens, which allowed for an adequate adaptation of concentration addition and thus unaffected predictability of the joint estrogenicity in the presence of non-estrogenic confounders.

Discussion

The modified YES proved to be a reliable system for the simultaneous quantification of yeast toxicity and estrogen receptor activation. Experimental results substantiate the available evidence for toxic masking as a relevant phenomenon in estrogenicity assessment of complex environmental samples. Synergistic modulation of estrogenic activity by non-estrogenic confounders might be of lower importance. The concept of concentration addition is discussed as a valuable tool for estrogenicity assessment of complex mixtures, with deviations of the measured joint estrogenicity from predictions indicating the need for refined analyses.

Conclusions

Two major challenges are to be considered simultaneously for a reliable analysis of the estrogenic activity of complex mixtures: the identification of known and suspected estrogenic compounds in the sample as well as the substance- and effect-level-dependent confounding impact of non-estrogenic toxicants.

Recommendations and perspectives

The application of screening assays such as the YES to complex mixtures should be accompanied by measures that safeguard against false negative results which may be caused by non-estrogenic but toxic confounders. Simultaneous assessments of estrogenicity and toxicity are generally advisable.