Anaerobic co-digestion of swine and poultry manure with municipal sewage sludge

The anaerobic digestion of municipal sewage sludge (SS) with swine manure (SM) and poultry manure (PM) was undertaken. It was found that a mixture of sewage sludge with a 30% addition of swine manure gave around 400 dm³/kgVS of biogas, whereas the maximal biogas yield from ternary mixture (SS:SM:PM = 70:20:10 by weight) was only 336 dm³/kgVS. An inhibition of methanogenesis by free ammonia was observed in poultry manure experiments. The anaerobic digestion was inefficient in pathogen inactivation as the reduction in the number of E. coli an Enterobacteriaceae was only by one logarithmic unit. A substantial portion of pathogens was also released into the supernatant.     

Family and species as determinants modulating mineral composition of selected wild-growing mushroom species

It has been known since the 1970s that differences exist in the profile of element content in wild-growing mushroom species, although knowledge of the role of mushroom species/families as determinants in the accumulation of diverse element remains limited. The aim of this study was to determine the content of 63 mineral elements, divided into six separate groups in the fruit bodies of 17 wild-growing mushroom species. The mushrooms, growing in widely ranging types of soil composition, were collected in Poland in 2018. Lepista nuda and Paralepista gilva contained not only the highest content of essential major (531 and 14,800 mg kg⁻¹, respectively of Ca and P) and trace elements (425 and 66.3 mg kg⁻¹, respectively of Fe and B) but also a high content of trace elements with a detrimental health effect (1.39 and 7.29 mg kg⁻¹, respectively of Tl and Ba). A high content of several elements (Al, B, Ba, Bi, Ca, Er, Fe, Mg, Mo, P, Sc, Ti or V) in L. nuda, Lepista personata, P. gilva and/or Tricholoma equestre fruit bodies belonging to the Tricholomataceae family suggests that such species may be characterised by the most effective accumulation of selected major or trace elements. On the other hand, mushrooms belonging to the Agaricaceae family (Agaricus arvensis, Coprinus comatus and Macrolepiota procera) were characterised by significant differences in the content of all determined elements jointly, which suggests that a higher content of one or several elements is mushroom species-dependent.

Graphical abstract

     

Interaction of different forms of graphene with chicken embryo red blood cells

With the rapid development of graphene synthesis and functionalization approaches, graphene and its related derivatives have shown great potential in many applications in material science, including biomedical applications. Several in vitro and in vivo studies clearly showed no definitive risks, while others have indicated that graphene might become health hazards. In this study, we explore the biocompatibility of graphene-related materials with chicken embryo red blood cells (RBC). The hemolysis assay was employed to evaluate the in vitro blood compatibility of reduced graphene, graphene oxide, and reduced graphene oxide, because these materials have recently been used for biomedical applications, including injectable graphene-related particles. This study investigated structural damage, ROS production and hemolysis of chicken embryo red blood cells. Different forms of graphene, when incubated with chicken embryo RBC, were harmful to cell structure and induced hemolysis.     

Use of a Hydrogen Peroxide Nebulizer for Viral Disinfection of Emergency Ambulance and Hospital Waiting Room

Food and Environmental Virology - Disinfection of hospital facilities and ambulances is an important issue for breaking the chain of transmission of viral pathogens. Hydrogen peroxide has provided...     

Modelling deposition and air concentration of reduced nitrogen in Poland and sensitivity to variability in annual meteorology

The relative contribution of reduced nitrogen to acid and eutrophic deposition in Europe has increased recently as a result of European policies which have been successful in reducing SO(2) and NO(x) emissions but have had smaller impacts on ammonia (NH(3)) emissions. In this paper the Fine Resolution Atmospheric Multi-pollutant Exchange (FRAME) model was used to calculate the spatial patterns of annual average ammonia and ammonium (NH(4)(+)) air concentrations and reduced nitrogen (NH(x)) dry and wet deposition with a 5 km × 5 km grid for years 2002-2005. The modelled air concentrations of NH(3) and dry deposition of NH(x) show similar spatial patterns for all years considered. The largest year to year changes were found for wet deposition, which vary considerably with precipitation amount. The FRAME modelled air concentrations and wet deposition are in reasonable agreement with available measurements (Pearson's correlation coefficients above 0.6 for years 2002-2005), and with spatial patterns of concentrations and deposition of NH(x) reported with the EMEP results, but show larger spatial gradients. The error statistics show that the FRAME model results are in better agreement with measurements if compared with EMEP estimates. The differences in deposition budgets calculated with FRAME and EMEP do not exceed 17% for wet and 6% for dry deposition, with FRAME estimates higher than for EMEP wet deposition for modelled period and lower or equal for dry deposition. The FRAME estimates of wet deposition budget are lower than the measurement-based values reported by the Chief Inspectorate of Environmental Protection of Poland, with the differences by approximately 3%. Up to 93% of dry and 53% of wet deposition of NH(x) in Poland originates from national sources. Over the western part of Poland and mountainous areas in the south, transboundary transport can contribute over 80% of total (dry + wet) NH(x) deposition. The spatial pattern of the relative contribution of national sources to total deposition of NH(x) may change significantly due to the general circulation of air.     

Economic Analysis of Summer Fallow Management to Reduce Take-All Disease and N Leaching in a Wheat Crop Rotation

This paper addresses the question of summer cover-crop adoption by farmers in presence of a risk of yield loss due to take-all disease and climate variability. To analyze the public incentives needed to encourage farmers to adopt summer cover crops as a means of reducing N leaching, we combine outputs from an economic, an epidemiological and an agronomic model. The economic model is a simple model of choice under risk. The farmer is assumed to choose among a range of summer fallow managements and input uses on the basis of the expected utility criterion (HARA assumption) in presence of both climate and take-all risks. The epidemiological model proposed by Ennaïfar et al. (Eur J Plant Pathol 118:127–143, 2007) is used to determine the impact of take all on yields and N uptake. The crop-soil model (STICS) is used to compute yield developments and N leaching under various management options and climatic conditions. The input parameters are chosen to match the conditions prevailing in Grignon, located in the main wheat-growing area in France. Eight management systems are examined: four summer fallow managements: ‘wheat volunteers’ (WV), ‘bare soil’ (BS), ‘early mustard’, ‘late mustard’, and two input intensities. We show that the optimal systems are BS (WV) when the take-all risk is (not) taken into account by agents. We then compute the minimum payment to each system such that it emerges in the optimum. We thus derive the required amounts of transfer needed to trigger catch-crop adoption. The results of the Monte Carlo sensitivity analysis show that the ranking of management systems is robust over a wide range of input parameters.     

Repetitive extragenic palindromic PCR (REP-PCR) as a method used for bulking process detection in activated sludge

Bulking of activated sludge is a world-widely prevalent problem and can lead to loss of bio-oxidation, further deterioration of effluent quality, and even to a complete breakdown of the entire treatment process. Most common reasons of bulking are bacterial community changes, especially excessive growth of filamentous bacteria or excess of biopolymers on surface of non-filamentous microbes. Because of complex nature of the bulking phenomenon, the successful bulking control strategy finding is still a very important need awaiting new options and advices. The repetitive extragenic palindromic PCR (REP-PCR) fingerprinting method has been applied to distinguish bacterial community in non-bulking and bulking activated sludge. The characteristic REP-PCR fingerprinting patterns, using the Ward??s clustering method, have been analyzed to determine homology/similarity relation between particular non-bulking and bulking sludge sampling. The received clustering results were in high concordance with activated sludge typing done based on physicochemical sludge analysis. The choice and application of molecular typing method in sludge analysis will depend upon the needs, skill level, and resources of the laboratory. The proposed REP-PCR method and statistical analysis of fingerprinting patterns seems to be simple, rapid, and effective methods to show differences between population in non-bulking and bulking activated sludge. It is easy to implement, and it may be useful for routinely activated sludge monitoring as well as may be helpful in early detection of bulking process.     

Pressure Sensitive Mats as Safety Devices in Danger Zones

Developing prototypes of pressure sensitive mats and testing their practical application were the aims of this study. Two contact plate mats were designed and constructed: rubber-rubber (R) and metal-metal (M). A recipe for rubber mixes and the production technology were prepared. Two laboratory test stands for measuring the actuating force, response time, static pressure resistance, and the durability of the mats were constructed. Computer software was written to control the operation of those test stands. Methods of testing pressure sensitive mats were based on PrDIN 31 006 (Deutsches Institut fur Normung [DIN], 1990) and EN 1760–1 (Comite Europeen de Normalisation [CEN], 1997). Both prototypes of contact plate mats were tested under laboratory and industrial conditions.

The test results proved that the design was correct, the setup requirements were fulfilled, and the mats were efficient and reliable in the industrial environment.