The dynamic flowgraph methodology as a safety analysis tool: programmable electronic system design and verification

The objective of this paper is to demonstrate the use of the Dynamic Flowgraph Methodology (DFM) during the design and verification of programmable electronic safety-related systems. The safety system consists of hardware as well as software. This paper explains and demonstrates the use of DFM, and how DFM can be used to verify the hardware and application software design. DFM is used not only to analyze newly developed software but also to verify existing software. The outcome of the design verification of the safety system is used to define the necessary diagnostic capabilities that are essential to guarantee the correct functioning of the safety functions.     

Comparison of periphytic biofilm and filter-feeding bivalve metal bioaccumulation (Cd and Zn) to monitor hydrosystem restoration after industrial remediation: a year of biomonitoring

Despite a significant decrease in the metallic waste emissions from an industrial site and a remediation process initiated in 2007, the Riou-Mort watershed (southwest France) still exhibits high Cd and Zn concentrations. Metal wastes have long been proven to significantly disturb aquatic communities. In this study, bioaccumulation capacities and responses to the chemical improvement of the hydrosystem were assessed for a year along the contamination gradient through the comparison of two biological models: Corbicula fluminea and periphytic biofilms, both considered as good bioindicators. Bioaccumulation results confirmed the persistence of water contamination in Corbicula fluminea and biofilms with, respectively, maximum Cd concentrations reaching 80.6 and 861.2 μg gDW(-1), and Zn concentrations 2.0 and 21.3 mg gDW(-1). Biofilms exhibited bioaccumulation in close correlation with water contamination, while Corbicula fluminea presented Cd bioaccumulation clearly regulated by water temperature and metal concentrations, affecting the ventilatory activity, as revealed by condition indices measurements. Also, a linear regression using Cd bioaccumulation and temperature () showed that below approximately 6 °C Corbicula fluminea did not appear to accumulate metals. Bioconcentration factors (BCFs) were higher in biofilms in comparison with Corbicula fluminea and showed the great accumulation capacity of suspended particulate matter in biofilms. However, bioaccumulation capacities are known to be influenced by many factors other than metal concentrations, such as temperature, water oxygenation or plankton and nutrient concentrations. Thus, this study demonstrates the power of a combined assessment using both Corbicula fluminea and biofilms as bioindicators to give a more integrated view of water quality assessment. Finally, when comparing our results with previous studies, the start of hydrosystem restoration could be shown by decreasing bioaccumulation in organisms.     

The combined effects of on-road and simulator training with feedback on older drivers' on-road performance: Evidence from a randomized controlled trial

Objective: A number of training programs that seek to improve driving performance among older drivers are available accompanied by a growing interest in their effectiveness. The purpose of the present investigation was to examine the combined effect of (1) basic in-class training (BT); (2) on-road training with individualized feedback (OR); and (3) training on a driving simulator (S).

Methods: Using a randomized controlled trial study design, 78 older drivers were randomly assigned to one of 3 groups (BT, BT + OR, or BT + OR + S). All participants completed a pre- and postintervention on-road driving evaluation on a standardized route. The driving evaluations were recorded using video and Global Positioning System (GPS) equipment and were scored by a blind assessor.

Results: The results indicated a significant reduction of approximately 30% in overall number of driving errors/omissions among participants in the BT + OR and the BT + OR + S groups in comparison to participants in the BT group.

Conclusions: This study adds to the mounting evidence demonstrating the effectiveness of individualized driver training in improving safe driving among older adults.     

The equivalence of diffusive samplers to reference methods for monitoring O3, benzene and NO2 in ambient air

A study of the equivalence to the reference methods of the Radiello samplers for ozone (O(3)) and benzene as well as the membrane-closed Palmes tube (MCPT) for nitrogen dioxide (NO(2)) is presented. These samplers benefit from new model equations capable of estimating their uptake rate. For O(3), the aim here was to demonstrate the equivalence for the reference period of 8 h and 120 microg m(-3), the target value of the 3rd European Daughter Directive. For benzene, the demonstration of equivalence to the annual limit value of 5 microg m(-3) of the 2nd European Daughter Directive was examined. In the case of NO(2), the equivalence to the annual limit value of the 1st European Daughter Directive (40 microg m(-3)) was considered. Results show that the radial sampler for O(3) fails to meet the Data Quality Objective (DQO) for continuous monitoring. However, with an expanded uncertainty of less than 30%, the O(3) diffusive sampler fulfils the DQO for indicative measurements. For benzene, the Radiello sampler exposed for 7 days gave satisfying results showing the ability of the sampler to meet the DQO of the reference method. Nevertheless, the field tests should be complemented by measurements for a wider range of benzene concentrations. In the case of NO(2), all the results of the laboratory and field experiments respected the requirements necessary for the demonstration of equivalence. Overall, these findings thus show that the Radiello sampler and the MCPT are equivalent to the reference methods only for assessment of benzene and NO(2), respectively.     

阿瓜斯阿根廷斯承包区净化处理的新模式： 有助于解决布宜诺斯艾利斯环境问题的工具

布宜诺斯艾利斯市的增长伴随着环境的逐渐恶化,其中包括水流的质量 .随着情况的全面恶化, 1993年政府将饮用水厂进行了为期 30年的私有化,并在布宜诺斯艾利斯市及其 17个郊区社区进行净化处理 .阿瓜斯阿根廷斯 (Aguas Agentinas)的用水操作者是里昂水业集团,为了响应当局的要求,提出并着手进行净化处理的新指导模式,这有助于解决该承包区目前的环境问题 .     

Assessment of nitrate pollution in the Grand Morin aquifers (France): combined use of geostatistics and physically based modeling

The objective of this work is to combine several approaches to better understand nitrate fate in the Grand Morin aquifers (2700 km(2)), part of the Seine basin. cawaqs results from the coupling of the hydrogeological model newsam with the hydrodynamic and biogeochemical model of river ProSe. cawaqs is coupled with the agronomic model Stics in order to simulate nitrate migration in basins. First, kriging provides a satisfactory representation of aquifer nitrate contamination from local observations, to set initial conditions for the physically based model. Then associated confidence intervals, derived from data using geostatistics, are used to validate cawaqs results. Results and evaluation obtained from the combination of these approaches are given (period 1977-1988). Then cawaqs is used to simulate nitrate fate for a 20-year period (1977-1996). The mean nitrate concentrations increase in aquifers is 0.09 mgN L(-1)yr(-1), resulting from an average infiltration flux of 3500 kgN.km(-2)yr(-1).     

Traitement des récoltes micronectoniques

This paper deals with some mechanical treatments of micronektonic samples which enable easier sorting into taxa. At sea, it is only possible to hose the net intensively before being brought on board ship; organisms are then washed into a bucket, the bucket emptied, and the samples preserved in a 10% buffered formaldehyde solution. A laboratory method for sorting gelatinous organisms based on differential specific gravity is described. The sorter consists of a cylinder 1.60 m high, supplied with running water. The remaining fraction is then sorted into 3 size groups. The device consists of a set of grills made from equidistant glass rods, through which organisms are sieved by the reciprocating motion of the grills into a large jar filled with running water. As this method results in higher sorting efficiency, it is recommended that further research be made in this direction.     

Emploi du chalut pélagique Isaacs-Kidd 10 pieds dans les eaux équatoriales du Pacifique

This paper describes the use of the 10 foot Isaacs-Kidd midwater trawl as a quantitative sampler of the micronektonic standing crop. The use of this gear without an opening-closing mechanism made it necessary to sample by means of oblique hauls. This study, which includes not less than 1500 hauls, is directed towards introducing some degree of uniformity in operating this device so that valid comparisons can be made between catches from oblique hauls made at similar depths, as well as oblique hauls made at different depths. It is emphasized that information must be obtained on the tow path using depth-time and depth-distance recorders simultaneously. As the maximum depth depends largely upon variations in towing speed, it is important to be able to control ship speed carefully. As net speed is a significant factor in avoidance and escapement, care should be taken to sample each layer in an identical manner. The procedure defined here mainly involves (a) modifications of the depressor; (b) application of the winch brake after all the cable has been paid out, during the time required for the trawl to attain maximum depth; (c) paying out and hauling in at high speed by the winch. Resulting hauls show a nearly oblique tow path. Sampling velocities of the net are the same for all water layers: slow during descent, fast during ascent. This allows valid comparisons to be made between a series of hauls. Nevertheless, future progress in quantitative sampling depends largely upon technical improvements, and the evolution of new devices and approaches.     

Towards a framework for assessment and management of cumulative human impacts on marine food webs

Effective ecosystem‐based management requires understanding ecosystem responses to multiple human threats, rather than focusing on single threats. To understand ecosystem responses to anthropogenic threats holistically, it is necessary to know how threats affect different components within ecosystems and ultimately alter ecosystem functioning. We used a case study of a Mediterranean seagrass (Posidonia oceanica) food web and expert knowledge elicitation in an application of the initial steps of a framework for assessment of cumulative human impacts on food webs. We produced a conceptual seagrass food web model, determined the main trophic relationships, identified the main threats to the food web components, and assessed the components’ vulnerability to those threats. Some threats had high (e.g., coastal infrastructure) or low impacts (e.g., agricultural runoff) on all food web components, whereas others (e.g., introduced carnivores) had very different impacts on each component. Partitioning the ecosystem into its components enabled us to identify threats previously overlooked and to reevaluate the importance of threats commonly perceived as major. By incorporating this understanding of system vulnerability with data on changes in the state of each threat (e.g., decreasing domestic pollution and increasing fishing) into a food web model, managers may be better able to estimate and predict cumulative human impacts on ecosystems and to prioritize conservation actions.