Synthesis of biodegradable PVA/cellulose polymer composites and their application in dye removal

Environmentally sustainable composite films were synthesized using polyvinyl alcohol (PVA) and cellulose. Cellulose was extracted from the Agro-waste (sugarcane bagasse) using chemical pre-treatment followed by the acid-hydrolysis process. The composites were also used for the treatment of dye (Methylene blue; MB and Crystal violet dye; CV) and it was observed that the removal capacity of PVA/C was 70% for CV and 64.5% for MB dye. The biodegradation study of these composite films was also carried out using bacterial strains isolated from the marine waters of south Bengal. The biodegradation study of these polymer composites was characterized by FTIR, SEM, XRD, TGA, swelling properties, and weight loss. The results indicated that the PVA/C polymer showed a better rate of degradation (43%) than PVA (35%). Different loading parameters like pH, temperature, and inoculum dosage were studied to assess the degradation of the composite materials. Thus, biodegradable composite films were synthesized utilizing Agro-waste and had dye removal properties.     

Studies on pigments,proteins and photosynthetic rates in some mangroves and mangrove associates from Bhitarkanika,Orissa

Pigment contents, proteins and net photosynthesis were investigated in fully developed leaf of 1-year-old seedlings of six mangroves (Bruguiera gymnorrhiza, Rhizophora apiculata) and mangrove associates (Caesalpinia bonduc, Cerbera manghas, Derris heterophylla, Thespesia populnea), collected from Bhitarkanika, located on the east coast of India. Large variations in the photosynthetic rates (P_N) among the six species were observed, ranging from 10.16 µmol CO₂ m^-2 s^-1 in C. bonduc to 15.28 µmol CO₂ m^-2 s^-1 in R. apiculata. The total leaf protein content ranged from 12.09 mg g^-1 dry wt in T. populnea to 51.89 mg g^-1 dry wt in B. gymnorrhiza. The chlorophyll a/b ratio was typically about 3.0 in all the studied species, except C. bonduc (2.8). Photosynthetic rates and chl a/b ratio in the leaves were found to be correlated. Analysis of chlorophyll and xanthophyll spectra suggested: (1) variations in different forms and amounts of carotenes as well as xanthophylls and (2) the presence of high amounts of near-UV-absorbing substances in leaves, particularly in the two mangroves (B. gymnorrhiza, R. apiculata) and a mangrove associate (T. populnea), which appears to be an adaptive feature. Estimation of the chl a/b ratios in isolated thylakoids yielded a low value of 1.8 for R. apiculata and >2.6 for other species. The total protein/chlorophyll ratios in thylakoids varied considerably from 3.14 (D. heterophylla) to 10.88 (T. populnea) among the mangrove associates and from 16.09 to 18.88 between the members of the Rhizophoraceae. The chlorophyll/carotenoid ratios in thylakoids of the six species were more or less similar. The absorption spectra for washed thylakoids of C. manghas and D. heterophylla exhibited absorption characteristics typical for C₃-plant thylakoids. However, thylakoids isolated from R. apiculata, B. gymnorrhiza, C. bonduc and T. populnea exhibited an unusual increase in absorption in the blue region (380-410 nm) of the absorption spectrum. The presence of high-absorbing (in the short-wavelength, near-UV region) pigments appears to be closely associated with the thylakoids in R. apiculata and T. populnea. Our results, therefore, suggest a wide range of variation, not only in protein and pigment contents of photosynthetic tissues, but also in the spectral characteristics and composition of the pigments in mangrove species. An understanding of the nature of these pigments in mangroves and their associates, under their natural conditions and especially in relation to eco-physiological adaptations, is necessary, not only in relation to conservation, but also to allow propagation under different salinity conditions.     

Assessment of heavy metal status and identification of source in soils under intensive vegetable growing areas of Brahmaputra valley,North East India

Environmental Monitoring and Assessment - Evaporation is an important meteorological variable that has a great impact on water resources. In the current research, climatology data, and seasonal...     

Microplastics pollution in Bangladesh: current scenario and future research perspective

ABSTRACT

Microplastics are emerging environmental pollutants that have gained tremendous scientific interest in recent years. These micropollutants are omnipresent both in the terrestrial and aquatic environments posing a deleterious threat to the ecosystem and biodiversity. So, it is important to develop a deep understanding of the environmental fate and potential adverse impacts of microplastics on the aquatic and terrestrial environments. By critically reviewing the previously published scientific literature, the present synthesis briefly outlines the characteristics, occurrence and potential toxic effects of microplastics on terrestrial and aquatic biota. The article also focuses on some innovative approaches for sustainable remediation of macroplastics as well as microplastics. Since the concept of microplastics pollution has yet in its infancy in Bangladesh, this synthesis provides an overview of the current scenario of microplastics pollution and some future research recommendations in the context of Bangladesh which might be helpful to the novice researchers of this field.     

Sustainability analysis of organic fraction of municipal solid waste conversion techniques for efficient resource recovery in India through case studies

Worldwide solid waste generation is nearly 1.3 billion tonnes/year, whereas in India 62 million tonnes of solid waste is generated per year by 377 million urban people. The increasing amount of solid waste in India, nearly 50% of which is organic matter, is the major concern for treatment and waste management. Several technologies are already in practice for the treatment of organic fraction of municipal solid waste (OFMSW) in India. It is important to assess the sustainability of these processes. In this study, the existing OFMSW technologies in India were examined. Case-study approach was taken for this purpose along with some published secondary reports. It was found that the selection of technology quite depends on the composition of the OFMSW. Food waste rich fractions are recommended for biomethanation, whereas the fractions rich in market waste and household waste are suitable for composting. Fractions rich in lignin and lignocellulosic materials are suitable for pyrolysis and gasification, whereas the rejects are to be sent for RDF preparation. Based on the findings, a sustainable framework has also been proposed, implementation of which may result in better waste management.     

Determining distribution coefficients for low cost adsorbents

As with other construction materials, coal fly ash contains trace metals that can leach into the natural environment. As part of a broader effort to encourage appropriate coal combustion product use in infrastructure applications (e.g., road construction, stabilization, and structural fill), this study evaluated traditional and low‐cost adsorbent alternatives for their capacity to attenuate trace metals. Batch sorption tests were used as a preliminary screen for a wide variety of low cost (e.g., steel byproducts, rubber dust, and compost) and innovative materials (e.g., kudzu, biofilm, and pond weed) as well as conventional materials (activated carbon, alumina, and zeolites). The removal rates were demonstrated in this study by observing the calculated distribution coefficient (K_d) which were determined using a program called MATLAB. Limestone and steel byproducts were found to be particularly effective with large K_d values of 15,740, 1,520, and 540 L kg^?1 for cadmium, chromium, and selenium and, for ladle refractory and mill scale, K_d values of 3,910, 670, and 1,760 L kg^?1 were observed. Among the three metals tested for this study, it was observed that most low cost and innovative materials removed cadmium quite efficiently; however, the removal of selenium and chromium depended on the substrate and prevailing pH. In general, these results suggest that alternative materials may have relevance in niche applications where leaching is a concern that can be addressed through enhanced attenuation capacity via blending or layering of adsorbents.     

Effect of pH and temperature on the kinetics of odor oxidation using chlorine dioxide

Increasing public concerns over odors and air regulations in nonattainment zones necessitate the remediation of a wide range of volatile organic compounds (VOCs) generated in the poultry-rendering industry. Currently, wet scrubbers using oxidizing chemicals such as chlorine dioxide (ClO2) are utilized to treat VOCs. However, little information is available on the kinetics of ClO2 reaction with rendering air pollutants, limiting wet scrubber design and optimization. Kinetic analysis indicated that ClO2 does not react with hexanal and 2-methylbutanal regardless of pH and temperature and implied that aldehyde removal occurs primarily via mass transfer. Contrary to the aldehydes, ethanethiol or ethyl mercaptan (a model compound for methanethiol or methyl mercaptan) and dimethyl disulfide (DMDS) rapidly reacted with ClO2. The overall reaction was found to be second and third order for ethanethiol and DMDS, respectively. Moreover, an increase in pH from 3.6 to 5.1 exponentially increased the reaction rate of ethanethiol (e.g., k2 = 25-4200 L/mol/sec from pH 3.6 to 5.1) and significantly increased the reaction rate of DMDS if increased to pH 9 (k3 = 1.4 x 10(6) L2/mol2/sec). Thus, a small increase in pH could significantly improve wet scrubber operations for removal of odor-causing compounds. However, an increase in pH did not improve aldehyde removal. The results explain why aldehyde removal efficiencies are much lower than methanethiol and DMDS in wet scrubbers using ClO2.