ATRAZINE IN SPRING RUNOFF AS RELATED TO ENVIRONMENTAL SETTING EBRASKA, 19921

ABSTRACT: A synoptic sampling of five surface-water sites in central Nebraska was conducted by the U.S. Geological Survey as part of its National Water-Quality Assessment Program during storm runoff in May 1992 to relate transport, yields, and concentrations of atrazine to environmental setting. Atrazine was the most extensively applied pesticide in the study unit. Atrazine transport was related to the size of contributing drainage area, quantity of atrazine applied, amount of precipitation, and volume of stream-flow. Estimated yields and mean concentrations of atrazine were related to the percentage of cropland in a drainage area. The largest estimated yields and mean concentrations of atrazine in surface water were associated from drainage areas with the highest percentage of cropland, and the smallest was associated with the smallest amount of cropland. Atrazine concentrations increased as streamflow increased but decreased at or near the time of peak streamflows, perhaps due to dilution. Atrazine concentrations then increased and remained elevated far into the stream recession. Atrazine is a regulated contaminant in finished public-water supplies. Large concentrations of atrazine could affect the management of public-water supplies because atrazine remains in solution in contrast to many other pesticides that are more easily removed.     

Safe use of refrigerants for process applications

This paper examines safety issues, with emphasis on central refrigeration plant for process applications. Plantroom hazards including refrigerant leakage, excess pressure, fire and noise are covered. It is concluded that routine surveys which are being conducted in connection with the chlorofluorocarbon and hydrochlorofluorocarbon phase-outs present an opportunity for examining safety issues.     

Time series analysis of coal mine accident experience

This study investigates several forecasting techniques that can be useful to mine safety managers for studying mine accident rate behavior. Three time series models were studied for extrapolation of accident rates. These models are applied to historical accident incidence data from a coal mine. Further, a method is presented for evaluating the three models for the selection of an appropriate model. For this particular mine application, it is concluded that the more complex Box-Jenkins ARMA model as well as first order autoregressive model do not give better results than the simple exponential smoothing model. However, when the random variations or autocorrelations in the accident experience rates between periods are different, the models may predict differently. As such, specific models must be developed for each mine on the basis of statistical analysis of the mine accident experience data over time. Moreover, the importance of incorporating human judgement to interpret the results of statistical forecasting cannot be overemphasized. Integration of policy or operating changes, which may impact mine safety performance, with statistical forecasting techniques is essential to arrive at a realistic prediction of future performance.     

Evaluation of a chemical stabilization process

Environmental Resources Management (ERM) performed an evaluation of a biosolids chemical stabilization process known as BIO*FIX®, marketed by Bio Gro Systems, Inc., of Annapolis, Maryland. The purpose of the evaluation was (1) to assess major characteristics of the process and its final product, (2) to determine the quantity and final disposition of all components in the incoming biosolids, and (3) to determine if the process conforms to new regulations promulgated and administered by the U.S. Environmental Protection Agency (EPA) titled “Standards for the Use or Disposal of Sewage Sludges” (40 CFR Part 503). The BIO*FIX® chemical stabilization process involves the addition of calcium oxide (CaO) to dewatered biosolids at rates that achieve the pathogen reduction and vector attraction reduction requirements of the 503 program while creating a marketable end product used as an agricultural amendment. ERM's project involved the testing of four process streams in order to create a mass balance on the process. Laboratory analyses were performed on samples of the dewatered biosolids, the chemically-stabilized end product, and the scrubber water effluent. The primary components of concern tested in the above process streams were ammonia, metals, odorous compounds, particulate matter, and organic matter. Through the tests described in the article, ERM drew the following conclusions: (1) The major gaseous pollutant resulting from the BIO*FIX® process is gaseous ammonia. The total gaseous ammonia released from the product depends on the ammonia nitrogen content of the biosolids, and pH and temperature levels reached in the process. Additional ammonia is emitted when the end product is loaded in trucks and stored. Any gaseous ammonia remaining in the end product after processing will slowly dissipate over time. (2) Other potential odor pollutants such as hydrogen sulfide (H₂S) and mercaptans were found to be below detectable levels in the uncontrolled exhaust gas. (3) Metals were not found in the exhaust gas in any detectable quantities. They would not be expected to volatilize during the process. Particulate matter emissions were found to be very low. (4) The pathogen reduction and vector attraction reduction requirements of the 40 CFR 503 regulations were met or exceeded. (5) Finally, through observations and tests, ERM found that the BIO*FIX® chemical stabilization process provides for a simple, viable, and effective conversion of biosolids into a beneficial use product in compliance with all pertinent regulations.     

Evaluation of tidal marsh restoration: Comparison of selected macroinvertebrate populations on a restored impounded valley marsh and an unimpounded valley marsh within the same salt marsh system in Connecticut,USA

Macroinvertebrates were examined on an impounded valley marsh in Stonington, Connecticut, that has changed from aTypha-dominated system to one with typical salt-marsh vegetation during 13 years following the reintroduction of tidal exchange. Animal populations on this restored impounded marsh were evaluated by comparing them with populations on a nearby unimpounded valley marsh of roughly the same size. Populations of the high marsh snail,Melampus bidentatus Say, were quantitatively sampled along transects that extended from the water-marsh edge to the upland; those of the ribbed mussel,Geukensia demissa Dillwyn, were sampled in low marsh areas on transects along the banks of creeks and mosquito ditches. The occurrence of other marsh invertebrates also was documented, but their abundance was not measured. The mean density ofMelampus was 332±39.6 SE/m² on the restored impounded marsh and 712±56.0 SE/m² on the unimpounded marsh. However, since snails were larger on the restored impounded marsh, the difference in snail biomass was less pronounced than the difference in snail density. MeanMelampus biomass was 4.96±0.52 SE g dry wt/m² on the restored impounded marsh and 6.96±0.52 SE g dry wt/m² on the unimpounded marsh. On the two marshes, snail density and biomass varied in relation to plant cover and other factors. The density and biomass ofGeukensia at the edge of the marsh were comparable on the restored impounded and unimpounded marshes. Mean mussel densities ranged from 80 to 240/m² and mean mussel biomass varied from 24.8–64.8 g dry wt/m² in different low marsh areas. In contrast, below the impoundment dike, meanGeukensia density was 1100±96.4 SE/m² and meanGeukensia biomass was 303.6±33.28 SE g dry wt/m². A consideration of all available evidence leads to the conclusion that the impounded marsh is in an advanced phase of restoration.     

The costs to farmers and estate owners of public access to the countryside

This paper considers the external costs of public access on privately‐owned farm and estate land in Scotland. The increased costs and reductions in income associated with public access are found to be highly variable and site‐specific, with the main effects on land in areas of high population density or high scenic quality, or with recreational attributes. Although costs were on average higher for estates, reflecting their larger area and recreational potential, on a per‐hectare basis the costs of access were greater for the farm sector. Whilst much of the public access exists through de facto rights on open‐access land, there was evidence for an increasing commercialization of open‐air recreation, particularly with respect to more specialized activities. The discussion considers the extent to which the costs of access for land managers are reflected in policies determining the public provision of countryside access.     

Recommended Methods for the Disposal of Sanitary Wastes from Temporary Field Medical Facilities

Emergency field medical facilities constructed after a disaster are frequently managed by medical staff even though many of the day-to-day problems of hospital management are unrelated to medicine. In this paper we discuss the short-term management of one of these problems, namely the control and disposal of sanitary wastes. It is aimed at persons in the medical profession who may find themselves responsible for a temporary hospital and have little or no previous experience of managing such situations. The wastes commonly generated are excreta, sullage and refuse. In addition, surface water must also be considered because its inadequate disposal is a potential health hazard. The paper concentrates on short-term measures appropriate for the first six months of the hospital or clinic's existence. Facilities expected to last longer are recommended to install conventional waste management systems appropriate to the local community and conditions. In most situations, wastes should be disposed of underground either by burial (for solids) or infiltration (for liquids). The design, construction and management of appropriate disposal systems are described.     

Woodlot scale: A method for rapid assessment of woodlot values

A method is described for the rapid survey and determination of the ecological value of woodlots. The three dominant tree species in a stand are given a visual ranking that is converted to awoodlot index through the use of species adaptation values. The woodlot index is scaled by presettlement vegetation type to yield awoodlot scale. The ecologically most valuable woodlots in a region are identified by using the woodlot scale and data on woodlot area, human disturbance, and tree density. The woodlot index corresponds closely to results from conventional methods of woodlot surveys. This method should be valuable to land-use planners for environmental impact assessment and regional planning.