Study of MCPA and MCPP herbicides mobility in soils from North-West Croatia as affected by presence of fertilizers

The mobility of acid herbicide (4-chloro-2-methylphenoxy)acetic acid [MCPA] and 2-(4-chloro-2-methylphenoxy)propionic acid [MCPA] in soils of North-West Croatia has been studied by soil thin-layer chromatography (STLC). Mobility of MPCA and MCPP was influenced by the change in concentration of soluble salts and the effect of mineral composition of the system studied, i.e. content of kaolin and sand in soil thin layer. The objective of this work was also to investigate how the mobility of phenoxy herbicides MCPA and MCPP is altered by the presence of fertilizers when both coexist in soil as a result of human activity. It has been found that mobility of acidic herbicides increases with application of fertilizers especially on soil with low clay and low organic matter content.     

Quantifying the efficiency of soil sampling designs: A multivariate approach

The objective of this paper is to quantify and compare the loss functions of the standard two-stage design and its composite sample alternative in the context of multivariate soil sampling. The loss function is defined (conceptually) as the ratio of cost over information and measures design inefficiency. The efficiency of the design is the reciprocal of the loss function. The focus of this paper is twofold: (a) we define a measure of multivariate information using the Kullback–Leibler distance, and (b) we derive the variance-covariance structure for two soil sampling designs: a standard two-stage design and its composite sample counterpart. Randomness in the mass of soil samples is taken into account in both designs. A pilot study in Slovenia is used to demonstrate the calculations of the loss function and to compare the efficiency of the two designs. The results show that the composite sample design is more efficient than the two-stage design. The efficiency ratio is 1.3 for pH, 2.0 for C, 2.1 for N, and 2.5 for CEC. The multivariate efficiency ratio is 2.3. These ratios primarily reflect cost ratios; influence of the information is small.     

Determination of selected neonicotinoid insecticides by liquid chromatography with thermal lens spectrometric detection

We studied the analysis of trace amounts of neonicotinoid insecticides by liquid chromatography coupled with a thermal lens spectrometric detector (TLS). This multi-residue analysis method is based on the reversed phase separation on C₁₈ column, isocratic elution and collinear dual beam TLS detection. The insecticides thiamethoxam, imidacloprid, acetamiprid and thiacloprid were detected with retention times of 4.4, 5.7, 6.5 and 8.5 min and limits of quantifications of 50, 89, 10, and 25 μg/L, respectively. The retention times agreed well with those obtained by the same chromatographic method but using a diode-array detector (DAD). The limits of quantifications for imidacloprid were identical in both techniques. However, the limits of quantifications for thiamethoxam, acetamiprid and thiacloprid were up to 8.5 times lower using the TLS detector compared to the diode-array detector. The applicability of the developed procedure was tested on spiked river water and potato samples.     

Post-war levels of persistent organic pollutants (POPs) in air from Serbia determined by active and passive sampling methods

For the duration of the war accident in former Yugoslavia, several industrial and military targets were burnt and damaged, resulting in a significant release of persistent organic pollutants. Locations heavily targeted in the attacks were later defined by UNEP as four “hot spots”: Kragujevac, Novi Sad, Pancevo and Bor. We analyzed concentration levels of pollutants collected in 2004 and 2005 in air samples from the city of Kragujevac, Serbia, following the war accident of 1999. Pollutants included polycyclic aromatic hydrocarbons (PAHs), hexachlorocyclohexane (HCH), dichloro-diphenyl-trichloroethane (DDT), dichloro-diphenyl-dichloroethylene (DDE), dichloro-diphenyl-dichloroethane (DDD) and polychlorinated biphenyls (PCBs). We present results obtained during air sampling campaign conducted in July 2004 by the active sampling method; and during September 2004–June 2005 by the passive sampling method. Our findings show the occurrence of residual quantities of DDT, HCH, PCBs and PAHs in air samples. High levels of PCBs are probably due to the destruction of transformers during the war accident.     

Multicriteria ranking of workplaces regarding working conditions in a mining company

Ranking of workplaces with respect to working conditions is very significant for each company. It indicates the positions where employees are most exposed to adverse effects resulting from the working environment, which endangers their health. This article presents the results obtained for 12 different production workplaces in the copper mining and smelting complex RTB Bor – ‘Veliki Krivelj’ open pit, based on six parameters measured regularly which defined the following working environment conditions: air temperature, light, noise, dustiness, chemical hazards and vibrations. The ranking of workplaces has been performed by PROMETHEE/GAIA. Additional optimization of workplaces is done by PROMETHEE V with the given limits related to maximum permitted values for working environment parameters. The obtained results indicate that the most difficult workplace is on the excavation location (excavator operator). This method can be successfully used for solving similar kinds of problems, in order to improve working conditions.     

The analysis of influence of individual and environmental factors on 2-wheeled users’ injuries

Objective: Powered 2-wheeled motor vehicles (PTWs) are one of the most vulnerable categories of road users. Bearing that fact in mind, we have researched the effects of individual and environmental factors on the severity and type of injuries of PTW users. The aim was to recognize the circumstances that cause these accidents and take some preventive actions that would improve the level of road safety for PTWs.

Methods: In the period from 2001 to 2010, an analysis of 139 road accidents involving PTWs was made by the Faculty of Transport and Traffic Engineering in Belgrade. The effects of both individual (age, gender, etc.) and environmental factors (place of an accident, time of day, etc.) on the cause of accidents and severity and type of injuries of PTWs are reported in this article. Analyses of these effects were conducted using logistic regression, chi-square tests, and Pearson's correlation.

Results: Factors such as categories of road users, pavement conditions, place of accident, age, and time of day have a statistically significant effect on PTW injuries, whereas other factors (gender, road type; that is, straight or curvy) do not. The article also defines the interdependence of the occurrence of particular injuries at certain speeds. The results show that if PTW users died of a head injury, these were usually concurrent with chest injuries, injuries to internal organs, and limb injuries.

Conclusions: It has been shown that there is a high degree of influence of individual factors on the occurrence of accidents involving 2-wheelers (PTWs/bicycles) but with no statistically significant relation. Establishing the existence of such conditionalities enables identifying and defining factors that have an impact on the occurrence of traffic accidents involving bicyclists or PTWs. Such a link between individual factors and the occurrence of accidents makes it possible for system managers to take appropriate actions aimed at certain categories of 2-wheelers in order to reduce casualties in a particular area. The analysis showed that most of the road factors do not have a statistically significant effect on either category of 2-wheeler. Namely, the logistic regression analysis showed that there is a statistically significant effect of the place of accident on the occurrence of accidents involving bicyclists.     

The influence of alcohol on pedestrians: A different approach to the effectiveness of the new traffic safety law

Objective: The aim of this study was to explore the effects of the new traffic safety law on pedestrian mortality by exploring hazardous behaviors of pedestrians in terms of alcohol use and blood alcohol concentration (BAC).

Methods: A retrospective autopsy study was performed, covering a 7-year period (from 2006 to 2012), including cases of fatally injured pedestrians who died at the scene of the incident. Blood samples obtained from the femoral vein during autopsy were analyzed for BAC. The entire sample was divided into 2 groups. The first included cases from 2006 to 2009, at which time the old traffic safety law was in force, and the second included cases from 2010 to 2012, under the new traffic safety law.

Results: A total of 247 cases were examined, covering a 7-year period. The average age was 57.5 ± 19.7 years (median 61.0 years) with a significant male predominance of 147 men to 100 women. This predominance also applied to alcohol use (54 vs. 13). The results show a significant decrease in the total annual number of fatally injured pedestrians, starting from 2009, compared to previous years, reaching a low in 2010, one year after implementation of the new traffic safety law. In contrast, the proportion of alcohol-intoxicated pedestrians showed no significant difference in the years preceding and following the new traffic safety law, nor did the annual distribution of BAC or mean BAC before and after application of the new law.

Conclusion: The present study indicates that the new traffic safety law has been quite effective in reducing pedestrian mortality. However, alcohol consumption and intoxication in pedestrians remains a fairly important factor in motor vehicle accidents involving pedestrians, because the proportion of pedestrians positive for alcohol, the proportion of severely intoxicated pedestrians with BAC > 1 g/L, and annual mean BAC have remained unchanged.