Polychlorinated dibenzo-p-dioxins/furans and dioxin-like polychlorinated biphenyls in food and feed in the Lithuanian market

Foods and feeds were analyzed during the period of 2007–2014 employing validated and accredited methods based on gas chromatography–high-resolution mass spectrometry. Sampling has been carried out in-line with national monitoring programs as well as during import controls into Lithuania. Food samples such as eggs, milk, beef, pork, poultry, fats of plant and animal origin, fish, cod liver, and feed samples such as premixes, feeds of plant origin, compound feed, mineral feed, vegetable oil, and fish meals were analyzed. Most of the samples exhibited concentrations below maximum limits, except cod liver. Health impacts were assessed in respect to human daily intakes. Data between groups are compared.     

The Properties of Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactide) Prepared by Different Synthesis Procedure

Different synthesis methods were applied to determine optimal conditions for polymerization of (3S)-cis-3,6-dimethyl-1,4-dioxane-2,5-dione (l-lactide), in order to obtain poly(l-lactide) (PLLA). Bulk polymerizations (in vacuum sealed vessel, high pressure reactor and in microwave field) were performed with tin(II) 2-ethylhexanoate as the initiator. Synthesis in the vacuum sealed vessel was carried out at the temperature of 150 °C. To reduce the reaction time second polymerization process was carried out in the high pressure reactor at 100 °C and at the pressure of 138 kPa. The third type of rapid synthesis was done in the microwave reactor at 100 °C, using frequency of 2.45 GHz and power of 150 W at the temperature of 100 °C. The temperature in this method was controlled via infrared system for in-bulk measuring. The solution polymerization (with trifluoromethanesulfonic acid as initiator) was possible even at the temperature of 40 °C, yielding PLLA with narrow molecular weight distribution in a very short period of time (less than 6 h). The obtained polymers had the number-average molecular weights ranging from 43,000 to 178,000 g mol⁻¹ (polydispersity index ranging from 1 to 3) according to the gel permeation chromatography measurements. The polymer structure was characterized by Fourier transform infrared and NMR spectroscopy. Thermal properties of the obtained polymers were investigated using thermogravimetry and differential scanning calorimetry.     

Factors associated with driving under the influence of alcohol

Objective: This study examined the risk factors of driving under the influence of alcohol (DUI) among drivers of specific vehicle categories (DSC). On the basis of this research, the variables related to DUI and involvement in traffic crashes were defined. The analysis was conducted for car drivers, bicyclists, motorcyclists, bus drivers, and truck drivers.

Method: The research sample included drivers involved in traffic crashes on the territory of Serbia in 2016 (60,666). Two types of analyses were conducted in this study. Logistic regression established the correlation between DUI and DSC and the The Technique for Order of Preference by Similarity to Ideal Solution (Multi-criteria decision making) method was applied to consider the scoring and explore the potential for the prevalence of DUI on the basis of 2 data sets (DUI and non DUI).

Results: The study results showed that driver error and male drivers were the 2 most significant risk factors for DUI, with the highest scores and potential for prevalence. The nonuse of restraint systems, driver experience, and driver age are the factors with a significant prediction of involvement in an accident and an insignificant prediction of DUI.

Conclusions: Following the development of the logistic prediction models for DUI drivers, testing of the model was conducted for 3 control driver groups: Car, motorcycle, and bicycle. The prediction model with a probability greater than 50% showed that 77% of car drivers were under the influence of alcohol. Similarly, the prediction percentage for motorcyclists and bicyclists amounted to 71 and 67%, respectively. The recommendation of the study is that drivers whose DUI probability is above 50% should be potentially suspected of DUI. The results of this study can help to understand the problem of DUI among specific driver categories and detect DUI drivers, with the aim of creating successful traffic safety policy.     

Identification of magnetic particulates in road dust accumulated on roadside snow using magnetic, geochemical and micro-morphological analyses

The aim of this study is to test the applicability of snow surveying in the collection and detailed characterization of vehicle-derived magnetic particles. Road dust extracted from snow, collected near a busy urban highway and a low traffic road in a rural environment (southern Finland), was studied using magnetic, geochemical and micro-morphological analyses. Significant differences in horizontal distribution of mass specific magnetic susceptibility (χ) were noticed for both roads. Multi-domain (MD) magnetite was identified as the primary magnetic mineral. Scanning electron microscope (SEM) analyses of road dust from both roads revealed: (1) angular-shaped particles (diameter ∼1-300 μm) mostly composed of Fe, Cr and Ni, derived from circulation of motor vehicles and (2) iron-rich spherules (d ∼ 2-70 μm). Tungsten-rich particles (d < 2 μm), derived from tyre stud abrasion were also identified. Additionally, a decreasing trend in χ and selected trace elements was observed with increasing distance from the road edge.     

Principal component analysis for soil contamination with organochlorine compounds

In order to investigate the distribution pattern of individual organochlorine compounds in soil samples collected from the sites (Canary Island – Spain, China, Germany, India, Romania, Russia, Serbia, Swiss, UK) affected by industrial activities to the more remote areas, principal component analysis was performed on the data taken from literature. Loading plots pointed out the strong correlation among the variables. Score plots revealed similar PCB- and OCP-soil patterns for majority of the investigated sites. Nevertheless, the temporal differences of PCB-soil loads have been identified: the late 1990s and early 2000s concentrations are similar to those of the early 1940s, and they are below the levels existed in 1980. The most pronounced PCB concentrations characterized the soil from 1966. For OCPs the influence of sites location on the detected concentration has been revealed: China and India were characterized by comparably higher loads of DDX (DDT and its metabolites) and of HCH-isomers, respectively.     

U and Th in some brown coals of Serbia and Montenegro and their environmental impact

GOAL, SCOPE AND BACKGROUND: The objective of this paper is to determine and compare the concentrations of U and Th in soft to hard brown (lignite to sub-bituminous) coals of Serbia and Montenegro. It also presents comparison of the obtained data on U and Th concentrations with the published data on coals located in some other countries of the world. Almost the whole coal production of Serbia and Montenegro is used as feed coals for combustion in thermal power plants. METHODS: Channel samples from open pit and underground mines and core samples were collected for hard and soft brown coals. For the analysis the samples were decomposed using microwave technique. Obtained solutions containing U and Th were analyzed by inductively coupled plasma mass spectroscopy (ICP-MS) using NIST standards. RESULTS: Concentration of U from the investigated basins and the corresponding mine fields ranges within 0.60-70.10 mg/kg, 0.65-3.20 mg/kg, 0.95-6.59 mg/kg, 1.20-6.05 mg/kg, 0.80-6.66 mg/kg, 0.18-89.90 mg/kg, 0.19-4.14 mg/kg, and 0.28-3.52 mg/kg for the Kostolac, Kolubara, Krepoljin, Sjenica, Soko Banja, Bogovina East field, Senje-Resavica and Pljevlja basins, respectively. Concentration of Th ranges within 0.20-2.60 mg/kg, 0.84-6.57 mg/kg, 1.48-6.48 mg/kg, 0.12-2.71 mg/kg, 0.13-4.95 mg/kg, 0.14-3.48 mg/kg, 0.29-3.56 mg/kg, and 0.17-1.89 mg/kg for the Kostolac, Kolubara, Krepoljin, Sjenica, Soko Banja, Bogovina East field, Senje-Resavica and Pljevlja basins, respectively. DISCUSSION: Brown coal from Senje-Resavica, Kolubara, Kostolac and Pljevlja is characterized by low U concentration. Coals form the Krepoljin, Soko Banja and Sjenica basins have slightly higher U concentrations than the mentioned group. The highest concentration of U is characteristic for the coal from the Bogovina East field. Concentration of Th in coals from Serbia and Montenegro has proved to be low. Out of all investigated coal basins, only the coal from the Krepoljin and Kolubara basins has high concentration of Th. The hydrothermally altered rocks of the Timok dacite-andesite complex, representing the basement of the Bogovina basin, could be a potential source of U, especially at the bottom part of the Lower seam of the Bogovina East field. CONCLUSIONS: This study shows that brown coals in Serbia and Montenegro (soft to hard brown coals or lignite to sub-bituminous) contain low levels of U (5.30 mg/kg, average value and 2.10 mg/kg geometric mean value) and Th (1.80 mg/kg, average value and 1.12 mg/kg geometric mean value). There are some obvious differences in concentration of U and Th in coals from different basins in Serbia and Montenegro. The approximate value for U and Th release mainly from power plants was 644.33 t and 983.46 t, respectively within the period 1965-2000 for the studied mines in Serbia, and 23.76 t and 15.05 t for the Potrlica mine (Montenegro) within the period 1965-1997. RECOMMENDATIONS: The coals in Serbia and Montenegro show no identifiable unfavourable impact on the surrounding environment, due to low natural radioactive concentration of U and Th, but further investigations concerning human health should be performed. PERSPECTIVES: Preliminary research revealed that in some Serbian coals (and, particularly, parts of the coal seam) U and Th content are rather high. Such coals should be carefully studied, as well as U and Th concentrations in ash, fly ash, waste disposals, nearby soil and ground water. Further studies should include determination of the radioactivity of all these products, and estimation of possible health impact.     

Toxicological characterization of the landfill leachate prior/after chemical and electrochemical treatment: A study on human and plant cells

In this research, toxicological safety of two newly developed methods for the treatment of landfill leachate from the Piškornica (Croatia) sanitary landfill was investigated. Chemical treatment procedure combined chemical precipitation with CaO followed by coagulation with ferric chloride and final adsorption by clinoptilolite. Electrochemical treatment approach included pretreatment with ozone followed by electrooxidation/electrocoagulation and final polishing by microwave irradiation. Cell viability of untreated/treated landfill leachate was examined using fluorescence microscopy. Cytotoxic effect of the original leachate was obtained for both exposure periods (4 and 24 h) while treated samples showed no cytotoxic effect even after prolonged exposure time. The potential DNA damage of the untreated/treated landfill leachate was evaluated by the comet assay and cytokinesis-block micronucleus (CBMN) assay using either human or plant cells. The original leachate exhibited significantly higher comet assay parameters compared to negative control after 24 h exposure. On the contrary, there was no significant difference between negative control and chemically/electrochemically treated leachate for any of the parameters tested. There was also no significant increase in either CBMN assay parameter compared to the negative control following the exposure of the lymphocytes to the chemically or electrochemically treated landfill leachate for both exposure periods while the original sample showed significantly higher number of micronuclei, nucleoplasmic bridges and nuclear buds for both exposure times. Results suggest that both methods are suitable for the treatment of such complex waste effluent due to high removal efficiency of all measured parameters and toxicological safety of the treated effluent.     

Photodegradation of sulfonamides and their N 4-acetylated metabolites in water by simulated sunlight irradiation: kinetics and identification of photoproducts

Once released into the aquatic environment, pharmaceuticals may undergo different degradation processes. Photodegradation, for example, might be an important elimination process for light-sensitive pharmaceuticals, such as antibiotics. In this study, the fate of sulfonamides (sulfamethazine, sulfadiazine, and sulfamethoxazole) and their N ⁴-acetylated metabolites (N ⁴-acetylsulfadiazine, N ⁴-acetylsulfamethazine, and N ⁴-acetylsulfamethoxazole) under simulated sunlight irradiation was investigated. The irradiation resulted in total or almost total degradation (88 to 98 %) of the pharmaceuticals tested, except for sulfamethazine (52 %), during 24 h of irradiation. The photoproducts of all investigated pharmaceuticals have been analyzed using high-performance liquid chromatography coupled to electrospray ionization tandem mass spectrometry. Structure elucidation performed from photodegradation products of both, sulfonamides and their N ⁴-acetylated metabolites, clearly showed two major formation pathways. These were cleavage of the sulfonamide bond as well as SO₂ extrusion. In total, nine photoproducts were elucidated. Among these photoproducts, the tautomers of sulfamethoxazole and desulfonated products of sulfadiazine and sulfamethazine were also present. Tautomers of sulfadiazine and sulfamethazine have been characterized here for the first time as well as some photoproducts of sulfadiazine, sulfametoxazole, and their metabolites N ⁴-acetylsulfadiazine and N ⁴-acetylsulfametoxazole. The obtained results are an important piece in the complex puzzle for assessing the environmental fate of sulfonamides and their metabolites in the environment.