Soil nitrate nitrogen dynamics after biosolids application in a tobosagrass desert grassland

Dormant-season application of biosolids increases desert grass production more than growing season application in the first growing season after application. Differential patterns of NO3-N (plant available N) release following seasonal biosolids application may explain this response. Experiments were conducted to determine soil nitrate nitrogen dynamics following application of biosolids during two seasons in a tobosagrass [Hilaria mutica (Buckl.) Benth.] Chihuahuan Desert grassland. Biosolids were applied either in the dormant (early April) or growing (early July) season at 0, 18, or 34 dry Mg ha(-1). A polyester-nylon mulch was also applied to serve as a control that approximated the same physical effects on the soil surface as the biosolids but without any chemical effects. Supplemental irrigation was applied to half of the plots. Soil NO3-N was measured at two depths (0-5 and 5-15 cm) underneath biosolids (or mulch) and in interspace positions relative to surface location of biosolids (or mulch). Dormant-season biosolids application significantly increased soil NO3-N during the first growing season, and also increased soil NO3-N throughout the first growing season compared to growing-season biosolids application in a year of higher-than-average spring precipitation. In a year of lower-than-average spring precipitation, season of application did not affect soil NO3-N. Soil NO3-N was higher at both biosolids rates for both seasons of application than in the control treatment. Biosolids increased soil NO3-N compared to the inert mulch. Irrigation did not significantly affect soil NO3-N. Soil NO3-N was not significantly different underneath biosolids and in interspace positions. Surface soil NO3-N was higher during the first year of biosolids application, and subsurface soil NO3-N increased during the second year. Results showed that biosolids rate and season of application affected soil NO3-N measured during the growing season. Under dry spring-normal summer precipitation conditions, season of application did not affect soil NO3-N; in contrast, dormant season application increased soil NO3-N more than growing season application under wet spring-dry summer conditions.     

Performance characteristics of sequential separation and quantification of lead-210 and polonium-210 by ion exchange chromatography and nuclear spectrometric measurements

A selective separation and quantitative determination procedure for 210Pb and 210Po in various environmental matrices from different sources such as IAEA-326 soil, phosphate rocks (PR), and phosphogypsum (PG) was developed. The tested samples were digested sequentially using concentrated mineral acids (HF, HNO3) by a programmable high-pressure microwave digestion system. The sample solution was loaded onto a preconditioned ion exchange column (Sr-resin) for chromatographic separation. Polonium-210 was eluted by 6 M HNO3 then spontaneously deposited onto polished silver discs to be measured using low-background alpha spectrometry. Lead-210 was sequentially eluted using 6 M HCl solution, precipitated as lead oxalate, dissolved in HNO3 solution, and mixed with scintillation cocktail to be measured by liquid scintillation counting (LSC). Performance of the developed procedure was tested using a reference soil (IAEA-326), with recommended isotope values, that was used as a quality control to assess separation and quantification efficiency (recovery %). The minimum detectable activities of 210Pb and 210Po were found to be 24 and 0.28 Bq kg(-1) for the measurements using LSC and alpha spectrometry, respectively. The recoveries (%) of 210Pb and 210Po were found to be 80 and 60%, respectively. To test the validity of the proposed LSC method, a comparative study was performed by measuring 210Pb activity concentration in test samples by nondestructive gamma-ray spectrometry.     

SUBALPINE,COLD CLIMATE,STORMWATER TREATMENT WITH A CONSTRUCTED SURFACE FLOW WETLAND1

The Tahoe City Wetland Treatment System (TCWTS) was constructed in 1997 to treat stormwater runoff from 23 ha of commercial, highway, and residential land use in the Lake Tahoe Basin. This subalpine, constructed, surface flow wetland treatment system consists of two cells in series, with a design water surface area of about 0.6 ha. Water quality monitoring from October 2002 through September 2003 was conducted with autosamplers at the inflow and outflow sites during 24 sampling events, with a median duration of 53 hours, representing 42 percent of total inflow to this wetland during the year. Monitoring data indicate an improvement of 49 percent or greater in effluent concentrations of dissolved phosphorus, nitrate, orthophosphorus, and total suspended solids. On average, event mean concentrations of total phosphorus were reduced from a median 279 μg/l at the inflow to 94 μg/l at the outflow. Event mean concentrations of total nitrogen were reduced from a median 1,599 μg/l at the inflow to 810 μg/l at the outflow. Net nutrient retention for the sampling period was estimated at 3 g phosphorus (P)/m²/y and 13 g nitrogen (N)/m²/y. Almost 4,000 kg of suspended sediment was captured by this wetland system during the year.     

COST EFFECTIVE ARSENIC REDUCTIONS IN PRIVATE WELL WATER IN MAINE1

ABSTRACT: This study was undertaken to investigate the cost effectiveness of selected arsenic avoidance methods. Annual costs of reverse osmosis (RO), activated alumina (AA), bottled water, and rented and purchased water coolers for various household sizes in Maine were compared. Relative ranking of systems shows that RO ($411 annually) is the most cost effective, followed by AA ($518) and one‐gallon jugs of water ($321 to $1,285), respectively, for households larger than one person. One‐gallon jugs ($321) followed by 2.5‐gallon jugs ($358) of water were found to be the most cost effective for households of one person or for households with arsenic III concentrations of 0.02 to 0.06 mg/L and arsenic V concentrations of 0.08 to 1.0 mg/L. Point‐of‐entry systems and water coolers were not found to be cost effective under any of the study's conditions. The research reported here will help states make more definitive treatment recommendations to households regarding the cost effectiveness of alternative treatment systems to reduce arsenic concentrations below 0.01 mg/L. While arsenic removal technologies are improving, which enhances removal rates and reduces costs, the major insights from this analysis appear to be reinforced by technological improvements.     

An Analysis of Spatial Clustering and Implications for Wildlife Management: A Burrowing Owl Example

Analysis tools that combine large spatial and temporal scales are necessary for efficient management of wildlife species, such as the burrowing owl (Athene cunicularia). We assessed the ability of Ripley’s K-function analysis integrated into a geographic information system (GIS) to determine changes in burrowing owl nest clustering over two years at NASA Ames Research Center. Specifically, we used these tools to detect changes in spatial and temporal nest clustering before, during, and after conducting management by mowing to maintain low vegetation height at nest burrows. We found that the scale and timing of owl nest clustering matched the scale and timing of our conservation management actions over a short time frame. While this study could not determine a causal link between mowing and nest clustering, we did find that Ripley’s K and GIS were effective in detecting owl nest clustering and show promise for future conservation uses.     

Regionalization of Municipal Solid Waste Management in Japan: Balancing the Proximity Principle with Economic Efficiency

The proximity principle—disposing of waste close to its origin—has been a central value in municipal solid waste (MSW) management in Japan for the last 30 years and its widespread adoption has helped resolve numerous “Not in My Backyard” issues related to MSW management. However, MSW management costs have soared, in large part because of aggressive recycling efforts and because most MSW is incinerated in a country that has scarce landfill capacity. In addition, smaller, less sophisticated incinerators have been closed because of high dioxin emissions. Rising costs combined with the closure of smaller incinerators have shifted MSW management policy toward regionalization, which is the sharing of waste management facilities across municipalities. Despite the increased use of regionalized MSW facilities, the proximity principle remains the central value in Japanese MSW management. Municipal solid waste management has become increasingly regionalized in the United States, too, but different driving forces are at work in these two countries. The transition to regionalized MSW management in Japan results from strong governmental control at all levels, with the central government providing funds and policy direction and prefectures and municipalities being the primary implementing authorities. By contrast, market forces are a much stronger force with US MSW management, where local governments—with state government oversight—have primary responsibility for MSW management. We describe recent changes in Japan’s MSW programs. We examine the connections between MSW facility regionalization, on the one hand, and, on the other hand, the proximity principle, coordination among local governments, central government control, and financing mechanisms.     

Using GIS to Generate Spatially Balanced Random Survey Designs for Natural Resource Applications

Sampling of a population is frequently required to understand trends and patterns in natural resource management because financial and time constraints preclude a complete census. A rigorous probability-based survey design specifies where to sample so that inferences from the sample apply to the entire population. Probability survey designs should be used in natural resource and environmental management situations because they provide the mathematical foundation for statistical inference. Development of long-term monitoring designs demand survey designs that achieve statistical rigor and are efficient but remain flexible to inevitable logistical or practical constraints during field data collection. Here we describe an approach to probability-based survey design, called the Reversed Randomized Quadrant-Recursive Raster, based on the concept of spatially balanced sampling and implemented in a geographic information system. This provides environmental managers a practical tool to generate flexible and efficient survey designs for natural resource applications. Factors commonly used to modify sampling intensity, such as categories, gradients, or accessibility, can be readily incorporated into the spatially balanced sample design.     

Control of combustion-generated nitrogen oxides by selective non-catalytic reduction

Controlling nitrogen oxides (NO(x)) emissions is becoming a daunting technical challenge as increasingly strict emission limits are being imposed. The stringent regulations have prompted the innovation and characterization of NO(x) control technologies suitable for various applications. This paper presents a review on NO(x) removal techniques with particular reference to selective non-catalytic reduction (SNCR) technology. This includes initially how SNCR emerged as a technology along with a comparison with other relevant technologies. A review of various features related to selective non-catalytic gas phase injection of ammonia and ammonium salts (as reducing agent) is presented. The use of urea solution as a reducing agent and its performance in laboratory and pilot scale tests as well as large-scale applications is also discussed. Use of cyanuric acid as a potential reducing agent is also presented. The underlying reaction mechanisms have been reviewed for ammonia, urea and cyanuric acid for the explanation of various observations. Computational fluid dynamics (CFD) modeling as applied to SNCR is also presented. Subsequently the use of SNCR coupled with other in-combustion and post-combustion NO(x) control techniques is elaborated. Additionally, a two-stage NO(x) removal strategy to control un-reacted ammonia slip and to improve overall efficiency is discussed. At the end a summary is given which highlights various areas needing further research.     

Developing the interaction matrix technique as a tool assessing the impact of traffic on air quality

This paper develops a technique which can be used as a preliminary tool for assessing air quality related to urban traffic. It combines a Geographic Information System (GIS) with an interaction matrix-type methodology based on a system analysis approach. The matrix identifies and quantifies interactions between all selected variables involved in a system as well as their interaction with the system as a whole. This matrix is used to determine the weightings to apply to spatial datasets within a GIS to develop a pollution vulnerability map. The focus of the paper is to introduce and assess a more versatile coding of the interaction matrix with respect to previously used coding. A case study is presented in which the modified interaction methodology is applied to data for a busy urban location. The resulting vulnerability map, in terms of pollution vulnerable hot spots, was compared to a pollution map derived from an advanced dispersion model. The interaction matrix technique with GIS can be used as a tool complementary to sophisticated numerical modelling and has potential as an analytical tool to evaluate multidisciplinary systems.     

A study on recovery of oil from sludge containing oil using froth flotation

Induced air flotation was used to recover oil from synthetically prepared sludge containing oil. A commercial surfactant was used as the collector and frother. The effects of various parameters, namely flotation time, initial amount of oil in the feed and the amount of surfactant used on the recovery of oil were investigated. Within the range of operating conditions studied herein, the maximum oil recovery obtained was about 55%. A detailed study of flotation kinetics based on oil recovery was carried out. It showed that the process followed first-order kinetics.