Role of illumination intensity in microcystin development using Microcystis aeruginosa as the model algae

Environmental Science and Pollution Research - Microcystis aeruginosa (M. aeruginosa) is one of the most common genera of cyanobacteria in algal blooms. In the present work, the impact of the...     

Optimum ridge-to-furrow ratio in ridge-furrow mulching systems for improving water conservation in maize (Zea may L.) production

Environmental Science and Pollution Research - Water-saving cultivation techniques have been attracting increased attention worldwide. Ridge-furrow mulching system (RFMS), as a prospective...     

Removal of arsenic(III,V) by a granular Mn-oxide-doped Al oxide adsorbent: surface characterization and performance

In order to remove arsenic (As) from contaminated water, granular Mn-oxide-doped Al oxide (GMAO) was fabricated using the compression method with the addition of organic binder. The analysis results of XRD, SEM, and BET indicated that GMAO was microporous with a large specific surface area of 54.26 m^2/g, and it was formed through the aggregation of massive Al/Mn oxide nanoparticles with an amorphous pattern. EDX, mapping, FTIR, and XPS results showed the uniform distribution of Al/Mn elements and numerous hydroxyl groups on the adsorbent surface. Compression tests indicated a satisfactory mechanical strength of GMAO. Batch adsorption results showed that As(V) adsorption achieved equilibrium faster than As(III), whereas the maximum adsorption capacity of As(III) estimated from the Langmuir isotherm at 25 °C (48.52 mg/g) was greater than that of As(V) (37.94 mg/g). The As removal efficiency could be maintained in a wide pH range of 3~8. The presence of phosphate posed a significant adverse effect on As adsorption due to the competition mechanisms. In contrast, Ca²⁺ and Mg²⁺ could favor As adsorption via cation-bridge involvement. A regeneration method was developed by using sodium hydroxide solution for As elution from saturated adsorbents, which permitted GMAO to keep over 75% of its As adsorption capacity even after five adsorption–regeneration cycles. Column experiments showed that the breakthrough volumes for the treatment of As(III)-spiked and As(V)-spiked water (As concentration = 100 μg/L) were 2224 and 1952, respectively. Overall, GMAO is a potential adsorbent for effectively removing As from As-contaminated groundwater in filter application.

     

周年磷肥旱季集中底施对玉-稻轮作磷肥效应的影响

春玉米-晚稻水旱轮作是近年来南方稻区种植制度变化下出现的新型两熟制模式。明确两季作物间磷肥的合理分配对玉-稻轮作作物产量与磷素利用效率的影响,对玉-稻轮作养分高效与高产协同实现,及丰富对水旱轮作前后季作物养分利用关系的认识具有理论意义。采用春玉米-水稻周年轮作田间试验,根据晚稻季磷肥前移至玉米季做底肥施用的比例及周年施磷量,设置7个磷肥施用处理,分别为两季作物均不施磷(P_0)、两季作物均按常规方法施磷(P_1)、1/3晚稻季磷肥前移(P_2)、2/3晚稻季磷肥前移(P_3)、全部晚稻季磷肥前移(P_4)、全部晚稻季磷肥前移且周年总施磷量减少15%(P_5)、全部晚稻季磷肥前移且周年总施磷量减少30%(P_6),分析了不同施磷处理作物产量、磷素吸收量及磷素利用效率的变化。与P_1相比,P_3与P_4处理显著提高了晚稻花后干物质的分配比例及晚稻产量,且其周年产量分别提高了4.87%和6.74%;P_5处理晚稻产量与P_1处理差异不显著,但P_6显著降低了晚稻产量。晚稻季磷肥前移施用明显促进了玉米及晚稻对磷素的吸收,显著降低了磷素的表观盈余量。与P_1处理相比,P_2、P_3、P_4处理两季作物周年土壤磷素依存率分别减少了11.63%、26.47%与22.08%。从磷肥利用效率看,P_4处理的磷肥周年累积回收效率、农学利用效率、偏生产力及磷肥产量贡献率均显著高于P_1处理,分别提高了102.46%、194.83%、6.73%与176.16%。与P_1处理相比,P_5处理周年磷肥产量贡献率及农学利用效率差异不显著,但分别提高了其磷肥回收效率与偏生产力32.56%和58.05%。玉米季施用的磷肥对晚稻有明显的后效作用,且比晚稻季施用磷肥具有更高的磷肥利用效率。所以在春玉米免耕复种晚稻时,可将晚稻季的磷肥全部前移至玉米季施用,并可减少15%周年施磷量。     

东北地区农业现代化与新型城镇化协调发展研究

新型城镇化与农业现代化作为"三化"、"四化"乃至"五化"战略的重要核心内容,研究新型城镇化与农业现代化的协调发展对于开创中国未来城乡经济社会发展一体化的新格局至关重要。以东北三省34个地级城市为研究对象,构建农业现代化与新型城镇化的评价指标体系,结合熵值赋权、变异系数赋权的综合确权法测算城市农业现代化与新型城镇化的发展水平,基于耦合协调度模型探讨二者的耦合度与协调发展度,并划分其阶段类型,研究表明:(1)东北三省新型城镇化的发展水平排序:辽宁省吉林省黑龙江省,农业现代化的发展优势排序:黑龙江省辽宁省吉林省;辽宁与吉林省的新型城镇化发展速度超前于农业现代化,仅黑龙江省的新型城镇化发展滞后于农业现代化;(2)东北三省新型城镇化的高值区分布在以哈尔滨为核心的黑龙江省西南、以长春为核心的吉林省中部、以沈阳和大连为核心的辽宁省中部及南端,农业现代化的高值区分布在哈—大—齐—绥沿线的松嫩平原;沈阳、大连、哈尔滨、长春新型城镇化水平居于东北三省前列,哈尔滨、沈阳、齐齐哈尔、绥化农业现代化水平位于首位;(3)辽宁省新型城镇化与农业现代化的耦合协调发展度均强于黑龙江省,吉林省略低;耦合度高值区位于黑龙江省东北部的三江平原、辽宁省的沿海经济带,协调发展度高值区位于黑龙江省西南部的松嫩平原及以长春、沈阳、大连为核心的小范围圈层区域;仅哈尔滨与沈阳市处于勉强协调阶段,多数城市处于高强度、中高强度拮抗耦合与轻度、中度失调阶段。     

The implementation of a measurement system for brushless DC motor parameters

Most of the energy conversion in industrial devices and equipment is completed by the motor. The acquirement of motor parameters becomes very important for designing the motor drives. The aim of this paper is to design and implement a motor measurement system. Through the processing of an Advanced RISC Machines (ARM) microcontroller, the various parameters of motors such as input voltage, input current, input power, motor speed, and motor torque can be obtained. Consequently, the torque constant, load torque, viscous friction, and the inertia of the motor are calculated and achieved. The motor parameters can be commanded and displayed in the designed human interface of a PC via USB communication. The hardware system designed in this system includes an ARM microcontroller, an inverter, a voltage sensor, a current sensor, a torque sensor, and power supply. The software programming is developed under the Visual Studio 2012 environment development platform using the C language. Finally, the prototype of the motor measurement system is completed and verified. The experimental results for the motor parameters and torque/speed characteristic are demonstrated and show the feasibility of the complete designed system.     

水泥窑共处置废物过程中重金属的流向分布

为了探索水泥窑共处置危险废物过程中重金属流向分布规律,研究了不同温度条件下Cr、As、Pb在煅烧熟料、颗粒物和尾气中的残留率。在900、1 000、1 100、1 200、1 300和1 450℃温度条件下,将添加Cr、As和Pb化学试剂的生料分别进行煅烧,模拟重金属在水泥窑内不同温度带的煅烧过程。结果表明,6个温度条件下,Cr主要分布在熟料中并且呈现不规则变化;颗粒物中的Cr在1 200℃条件下分布量最大,所占比例为32.79%(w);在900℃和1450℃条件下,烟气中的Cr分布量最大,所占比例为0.24%(w)。6个温度条件下As主要分布在熟料中并且1 000~1 450℃条件下稳定在81%~83%之间;在900℃条件下,As在熟料中的残留率最大,所占比例为97%(w);在1450℃条件下,As在尾气中的分布达到最大值,所占比例为0.0023%(w)。6个温度条件下,Pb在熟料中的残留率随着温度升高而逐渐减少,挥发颗粒物中的含量呈现相反的趋势;尾气中Pb的含量随着温度的升高逐渐增加。     

PCBs污染土壤的CaO诱导低温热处理脱氯研究

研究了低温热处理脱氯技术对废弃电容器封存点附近污染土壤中多氯联苯脱氯的效果,考察反应温度、反应时间及CaO添加比例对PCBs去除率、脱氯率的影响以及反应前后土壤中污染物的组分变化。实验土样中PCBs浓度为107.7 mg/g,属于罕见高浓度PCBs污染土壤。当反应温度为400℃、停留时间4h、CaO添加比例为10%,PCBs的去除率为87.7%,脱氯率为85.3%。土壤样品中五氯联苯和四氯联苯反应后含量降低或未检出,部分反应后样品检出一氯联苯和联苯,说明在CaO诱导PCBs低温热处理脱氯反应中存在逐步脱氯/加氢反应途径。     

絮团粘性分维数的概念及其分析模型

水处理中的絮团具有复杂的形态结构,分维数是描述这种结构的有力工具。通过分析固液体系的粘度与絮团分维数之间的关系,提出了絮团粘性分维数的新概念及粘性分维数测定的数学物理模型,并进行了实验验证。与常用的质量分维数、边界分维数、面积分维数、体积分维数、表面积分维数等相比,絮团的粘性分维数及其测定模型具有易于测量、可同时表征不同类型絮团、可定量分析絮凝产品组成等特点,从而为絮团形态结构的定性及定量研究开辟了新的途径。