PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Influence of Brazilian herbal regulations on the use and conservation of native medicinal plants

For decades, several native medicinal species have been used by the pharmaceutical industry in Brazil to create commercial products. In 1995, the Ministry of Health, following the recommendations of the World Health Organization, established herbal regulations (RDC 17) in order to improve the quality of such products. In fact, only plant species with conclusive results from pharmacological and toxicological studies can be used for creating medicines. In this study, we evaluated the consequences of RDC 17 on the use and conservation of native medicinal plants by comparing the plant material used by six companies in 1995/1996 and 10 years later (2005/2006). Eighty-three different species were used in 1995/1996, 50 of them native (60.2%), 16 exotic (19.3%), and 17 imported (20.5%). In 2005/2006, 44 species were used by the companies and only 19 (43.2%) were native. The category of plant material that saw the largest decrease in use was roots, and in 2005/2006 leaves were more used. The study shows a strong reduction in the collection of native species signalizing the importance of herbal regulations on their conservation. It also points to the need for pharmacological and toxicological studies of the Brazilian native medicinal flora, as well as studies on their ecology and conservation.     

Evaluation of biotechnological processes to obtain ethanol from recycled paper sludge

Journal of Material Cycles and Waste Management - Finding innovative solutions to manage waste and to expand the production of biofuels are some of the current challenges. Pulp and paper sectors,...     

Influence of MSWI bottom ash used as unbound granular material on the corrosion behaviour of reinforced concrete

The reutilisation of MSWI natural weathered bottom ash (WBA) in many applications such as road and underground constructions, embankments or as an aggregate replacement is a common practice in many developed countries. Its potential environmental risk has regularly been evaluated from the point of view of the leaching of heavy metals and metalloids. Nevertheless, the influence over steel rebar when reinforced concrete is exposed to the contact with WBA has been poorly assessed before. In this study, it has been possible to evaluate in terms of days the probability of corrosion in a common case of WBA reutilisation, which is in contact with reinforced concrete formulated with conventional Portland cement. The corrosion monitoring indicates that the probability of corrosion of steel rebar is higher than 90 % with a corrosion rate (CI) estimated to be 11.6 µm year^?1. The aggressive conditions imposed by WBA suppose an important withdrawal if the application of reutilisation involves contact with steel rebar.     

Heavy metal pollution in surface sediment and mussel samples in the Gulf of Gemlik

Different sources of pollution in Karasu Creek were investigated to obtain the water quality and ratio of contamination in this region. To achieve the main objectives of the present study, water samples were collected from Karasu Creek, starting from flow pattern at the upstream site of Akkaya Dam to the end of the dam, crossing the place where the Creek drains into. Dissolved oxygen, electrical conductivity, temperature and maximum/minimum pH were measured systematically for 12 months in the stations, where the water samples were collected. Chemical analyses of the water samples were carried out by using Cadas 50 S brand UV spectrometer to find out the Pb, Fe, Cu, Zn, Ni, Cr, Cd, S, F and Cn concentrations. These concentration were determined in μg/lt as 80–850; 180–4,920; 10–6,100; 440–25,530; 130–2,400; 120–280; 20–150; 214,250–1,113,580; 1,560–4,270 and 40–690, respectively. To determine metal levels of the water samples, multivariate analyses (element coefficient correlation, coefficient correlation dendrogram, hierarchical cluster analysis dendrogram, model summary and ANOVA) were used. The analyses yielded highly accurate results. There were positive correlations between some elements and their possible sources were the same. The stations which resembled each other along the creek were divided into three groups. The water quality of the creek was low and had toxic qualities. Eutrophication developed in Akkaya Dam along the creek. The source of pollution was thought to be industrial and residential wastes. Absolute (0–100 m), short distance (100–500 m) and medium distance (500–2,000 m) conservation areas should be determined in pollution areas along Karasu Creek and they should be improved.     

Modulation of branchial ion transport protein expression by salinity in glass eels (<Emphasis Type="Italic">Anguilla anguilla</Emphasis> L.)

The Anguillid juvenile glass eel must deal with the osmoregulatory consequences of highly variable environmental salinities on its recruitment migration from coastal to fresh waters. Changes in ionoregulatory parameters and branchial ion transport protein [Na⁺/K⁺-ATPase, Na⁺:K⁺:2Cl⁻ cotransporter (NKCC), cystic fibrosis transmembrane regulator (CFTR) anion channel, V-type proton ATPase] expression (activities, protein and/or mRNA level expression and/or cellular localization) in response to acclimation to a broad range of ionic strengths [distilled water (DW) to hypersaline water (HSW; 150%) sea water (SW 32‰)] was studied. The estuarine glass eels were very euryhaline and successfully acclimated to acute changes in environmental ionic strength from 50% SW, with high mortality only observed in HSW (51%) and sublethal osmoregulatory indicators (whole body water content and sodium levels) disturbed at the extremes (DW and HSW). Central to a high salinity acclimation were elevated branchial Na⁺/K⁺-ATPase, NKCC and CFTR expression. At lower salinity, Na⁺/K⁺-ATPase expression was maintained and NKCC and CFTR expressions were reduced. Branchial chloride cells increased in size up to SW but decreased in HSW. During hypotonic disturbance (DW), no compensatory elevation in V-ATPase or Na⁺/K⁺-ATPase expression was observed.     

Production patterns of packaging waste categories generated at typical Mediterranean residential building worksites

The construction sector is responsible for around 28% of the total waste volume generated in Europe, which exceeds the amount of household waste. This has led to an increase of different research studies focusing on construction waste quantification. However, within the research studies made, packaging waste has been analyzed to a limited extent. This article focuses on the packaging waste stream generated in the construction sector. To this purpose current on-site waste packaging management has been assessed by monitoring ten Mediterranean residential building works. The findings of the experimental data collection revealed that the incentive measures implemented by the construction company to improve on-site waste sorting failed to achieve the intended purpose, showing low segregation ratios. Subsequently, through an analytical study the generation patterns for packaging waste are established, leading to the identification of the prevailing kinds of packaging and the products responsible for their generation. Results indicate that plastic waste generation maintains a constant trend throughout the whole construction process, while cardboard becomes predominant towards the end of the construction works with switches and sockets from the electricity stage. Understanding the production patterns of packaging waste will be beneficial for adapting waste management strategies to the identified patterns for the specific nature of packaging waste within the context of construction worksites.     

Heavy Metal Availability in Soil Amended with Composted Urban Solid Wastes

A study was performed to evaluate the pH and the availability of Zn, Cu, Mn, Pb, and Ni in soil amended with increasing doses of composted solid wastes, collected in Rio de Janeiro, Rio de Janeiro State and in Coimbra, Minas Gerais State, Brazil. The influence of the time elapsed between compost application to the soil and the sampling of the plant growth substrate (soil + compost) for pH and metal availability analyses was also examined. The availability of heavy metals in the soil, in the compost and in the substrate was evaluated using DTPA solution for metal extraction. The increase of the compost doses added to the soil resulted in the increase of the pH in the substrate. The addition of the compost from the bigger city, Rio de Janeiro, resulted in higher increase in soil pH and available Zn, Cu, Pb, and Ni levels as compared to the addition of the compost from the smaller city, Coimbra. Increasing the time elapsed between the compost application to the soil and the sampling of the mixture resulted in higher available Zn, Cu, Mn, and Pb levels. The addition of the compost from Rio de Janeiro resulted in substrate metal concentrations in the order Zn > Pb > Ni > Cu > Mn and for the Coimbra compost the metal concentrations in the substrate was Zn > Pb > Cu > Ni > Mn. The higher values of pH and available metals obtained for the bigger city were attributed to the greatest metal contamination of its compost.     

The ability of biological and organic synthetic materials to accumulate atmospheric particulates containing copper, lead, nickel and strontium

This work was aimed at finding materials that could be used as alternatives to lichens as air quality monitors since the high natural variability and the large amount of lichen collected are two drawbacks of the use of these organisms. Lichen Flavoparmelia caperata(L.) Hale was exposed in three different forms (transplant, detached from the substratum and as a biomass-ground and homogeneized) and compared to the planetree bark (Platanus hybrida Brot.), exposed as a biomass, and two organic synthetic materials (Chelex(R) 100 resin and cellulose acetate). Materials were exposed for two months in the winter, spring and summer, at three Portuguese coastal cities. The results showed that the airborne accumulations of Cu, Ni, Pb and Sr were partially dependent on the meteorological conditions but mainly dependent on the nature of the exposed material. The standard deviations of the synthetic materials or homogenized biomass were the same or greater than lichen transplants or detached. The accumulation by biological materials, of the four studied elements, was comparable to the lichen transplant accumulation. The replacement of the traditional transplants by the biomass was not considered advantageous, since their preparation is time-consuming. Therefore lichens remain the most suitable in biomonitoring studies. The exposure of detached lichen allows the accurate measurement of the exposed area/volume so it can be useful to relate atmospheric deposition rates with the lichen metal content. The synthetic materials accumulated Cu and Ni and should only be used as an alternative to traditional transplants when these are the elements of interest.     

Development of a simple extraction cell with bi-directional continuous flow coupled on-line to ICP-MS for assessment of elemental associations in solid samples

A continuous-flow system comprising a novel, custom-built extraction module and hyphenated with inductively coupled plasma-mass spectrometric (ICP-MS) detection is proposed for assessing metal mobilities and geochemical associations in soil compartments as based on using the three step BCR (now the Measurements and Testing Programme of the European Commission) sequential extraction scheme. Employing a peristaltic pump as liquid driver, alternate directional flows of the extractants are used to overcome compression of the solid particles within the extraction unit to ensure a steady partitioning flow rate and thus to maintain constant operationally defined extraction conditions. The proposed flow set-up is proven to allow for trouble-free handling of soil samples up to 1 g and flow rates < or =10 mL min(-1). The miniaturized extraction system was coupled to ICP-MS through a flow injection interface in order to discretely introduce appropriate extract volumes to the detector at a given time and with a given dilution factor. The proposed hyphenated method demonstrates excellent performance for on-line monitoring of major and trace elements (Ca, Mn, Fe, Ni, Pb, Zn and Cd) released when applying the various extracting reagents as addressed in the BCR scheme, that is, 0.11 M CH(3)COOH, 0.1 NH(2)OH.HCl and 30% H(2)O(2), even when a well recognized matrix-sensitive detector, such as ICP-MS, is used. As a result of the enhanced temporal resolution of the ongoing extraction, insights into the breaking down of phases and into the kinetics of the metal release are obtained. With the simultaneous multielement detection capability of ICP-MS, the dynamic fractionation system presents itself as an efficient front-end for evaluation of actual elemental association by interelement comparison of metals leached concurrently during the extraction time. Thus, the intimate elemental association between Cd and Zn in contaminated soils could be assessed.