Dibenzothiophene oxidation by horseradish peroxidase in organic media: effect of the DBT:H2O2 molar ratio and H2O2 addition mode

Its is well known that in the biodesulfurization (BDS) process the low water solubility of sulfur compounds hinders its transference from the oil phase to the cells being the rate-limiting step in the metabolism of dibenzothiophenes (DBT). Thus sulfur compounds derivatives with high water solubility could be more easily transported increasing the BDS efficiency. The present work performed a stepwise evaluation of the enzymatic oxidation of DBT by horseradish peroxidase (HRP). Reactions were carried out in monophasic organic media containing 25% (v/v) acetonitrile. The following parameters were evaluated: DBT:H2O2 molar ratio (1:1-1:20); H2O2 addition mode (single or stepwise); pH (6.0-8.0) and temperature (37-50 degrees C). Best results were observed in a reaction medium at pH 8.0 presenting HRP 0.06IUml(-1), DBT 0.267mM, DBT:H2O2 molar ratio of 1:20 (stepwise hydrogen peroxide addition) and incubated at 45 degrees C for 60min. Under these conditions 60% of DBT was converted into dibenzothiophene sulfoxide (12%) and dibenzothiophene sulfone (46%). The DBT oxidation rate observed in this work, of 5mmolmin(-1)g(-1) of HRP, was 250-fold higher than the BDS rate, 20mumolmin(-1)g(-1) of catalyst. As such a combined enzyme-microbial desulfurization process could be envisaged. Products were determined by HPLC RP C-18.     

Metallothionein levels in Algerian mice (Mus spretus) exposed to elemental pollution: an ecophysiological approach

The potential use of metallothioneins (MTs) as biomarkers of trace metal contamination was evaluated for the first time in the Algerian mouse (Mus spretus). Mice were collected seasonally in an abandoned mining area (Aljustrel) and in a reference area, both located in southern Portugal. MT levels were quantified in liver and kidney by differential pulse polarography and hepatic elemental concentrations (Mn, Fe, Cu, Zn, Se) were determined by particle-induced X-ray emission. Hepatic iron and selenium concentrations were elevated in mice from Aljustrel mine when compared to reference animals. MTs levels were averagely higher in mice from Aljustrel than those originated from the reference area. A season-dependent significant effect was found on the hepatic and renal MT concentrations, characterized by higher levels in winter and lower in autumn. In contaminated mice positive relationship between liver elemental contents (Cu in autumn and Fe in winter) and MTs were found. The seasonal variation of MT suggests that probably physiological and environmental factors could influence hepatic and renal MT induction. Results seem to imply that some environmental disturbance occur in the vicinity of the Aljustrel mine. Therefore, for the management purposes MT levels should be followed in liver of M. spretus, especially in winter. Furthermore, other physiological factors that could influence MT expression and turnover in Algerian mouse should also be monitored.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Effect of irrigation on the survival of total coliforms in three semiarid soils after amendment with sewage sludge

Sewage sludges are increasingly used in soil amendment programmes, although not without risk since they contain, among other potential hazards, high concentrations of total coliform bacteria. In this paper we have studied the effect of irrigation on the survival of total coliforms in three semiarid degraded soils with different agricultural practices. Fresh sewage sludge was added at 50 g kg(-1) soil, and incubated in both the presence and absence of irrigation. The absence of irrigation led to a sharp decrease in the number of total coliforms in all soils, with the bacteria disappearing in 40 days. Irrigation produced a substantial initial increase in the number of coliforms in the three soils, although after 80 days there was none growing in any of the soils. The results showed that there were significant differences in the survival of coliform bacteria due to the presence or absence of irrigation.     

Recovery of PET from packaging plastics mixtures by wet shaking table

Recycling requires the separation of materials appearing in a mass of wastes of heterogeneous composition and characteristics, into single, almost pure, component/material flows. The separation of materials (e.g., some types of plastics) with similar physical properties (e.g., specific gravity) is often accomplished by human sorting. This is the case of the separation of packaging plastics in municipal solid wastes (MSW). The low cost of virgin plastics and low value of recycled plastics necessitate the utilization of low cost techniques and processes in the recycling of packaging plastics. An experimental study was conducted to evaluate the feasibility of production of a PET product, cleaned from PVC and PS, using a wet shaking table. The wet shaking table is an environmentally friendly process, widely used to separate minerals, which has low capital and operational costs. Some operational variables of the equipment, as well as different feed characteristics, were considered. The results show that the separation of these plastics is feasible although, similarly to the mineral field, in somewhat complex flow sheets.     

Enhancement of biodegradation of oil adsorbed on fine soils in a bioslurry reactor

Techniques for enhancing the biodegradation of oil-contaminated fine soils in a slurry-phase bioreactor were investigated. Using a model system consisting of kaolin particles containing adsorbed n-dodecane as a diesel fuel surrogate, we investigated how increasing the temperature and adding a surfactant and various hydrophobic support media affected the biodegradation rate of n-dodecane. Increasing the temperature from 25 to 35 degrees C decreased the time required for complete degradation of n-dodecane by 30%, from 110h to 80h. Addition of the surfactant polyethylene glycol p-1,1,3,3-tetramethylbutylphenyl ether decreased the degradation time to less than 48h at 35 degrees C, although a high concentration of the surfactant (3000mgl(-1)) was required. We suspect that the surfactant increased the degradation rate by solubilizing the n-dodecane into the solution phase in which the microorganisms were suspended. We tested five types of organic polymers as support media for the microorganisms and found that the biodegradation time could be reduced by approximately 50% with a support medium made from polyurethane; in the presence of this medium, only 36h was required for complete decomposition at 35 degrees C. The reduction in the degradation time was probably due to transfer of the n-dodecane from the soil to the support medium, which improved contact between the n-dodecane and the microorganisms. The polyurethane support medium bearing the microorganisms was stable and could be reused.     

Persistent organic pollutants in atmospheric deposition and biomonitoring with Tillandsia Usneoides (L.) in an industrialized area in Rio de Janeiro state, south east Brazil--Part I: PCDD and PCDF

Monitoring of immission of persistent organic pollutants in the industrialized area of Volta Redonda (V.R.) and in the National Park of Itatiaia (PNI) in southeast Brazil was performed using an endemic Bromeliad species as biomonitor and measuring total deposition rates on funnels covered with polyurethane foams. Samples were collected during 78 days in V.R. and 95 days in PNI in winter (dry season, June-August 2003) and during 114 days in both areas in summer (rainy season, December 2003-February 2004). The PCDD/PCDF deposition rates ranged from 0.10 to 1.9 pg WHO-TEQ/(m2 day) in winter and from 0.11 to 2.2 pg WHO-TEQ/(m2 day) in summer. Deposition rates found in V.R. in summer were four- to ninefold higher than those measured in PNI, while in winter deposition rates in both regions were in the same range. Deposition rates in V.R. in summer were about five fold lower than those measured in 1996. PCDD/PCDF levels in biomonitor samples were between 0.95 and 14.6 ng WHO-TEQ/kg d.m. in winter and between 2.2 and 5.2 ng WHO-TEQ/kg d.m. in summer. In winter, concentrations found in V.R. were up to 11 times higher than those found in PNI, while in summer the levels measured in both areas were comparable. The homologue and isomer profiles found in the deposition as well as in the biomonitor samples from V.R. indicate that steel production is the main source of contamination in the region, whereas in PNI, the long range transport of these pollutants is the predominant contamination pathway.     

Environmental assessment of water-courses of the Turvo Limpo River basin at the Minas Gerais State, Brazil

A study was performed to evaluate the environmental contamination in the Turvo Limpo River basin which receives effluent discharges from domestic (residential and commercial) activities. The watercourses examined were the São Bartolomeu Stream, Turvo Sujo River, and Turvo Limpo River, located in the Minas Gerais State, Brazil. Water samples were collected at the river-side and analyzed for evaluation of pollutant inputs. The pH, temperature, electrical conductivity, redox potential (Eh), dissolved oxygen (DO), total and settleable solids, visual color, hardness, chemical oxygen demand (COD), biochemical oxygen demand (BOD), chloride, total phosphate, total nitrogen, ammonia nitrogen, nitrate, total coliforms and E. coli, as well as the Cd, Pb, Cu, and Zn speciation were determined in the watercourses. The data obtained were compared with those of the Brazilian Environmental Standards and with data from non-contaminated areas. River water characteristics in some sites were far from the limit values established for superficial waters with satisfactory quality. For instance, the BOD values reached 411 mg L^?1 for a maximum limit of 10.0 mg L^?1, while the ammonia nitrogen concentration reached 28 mg L^?1 for a maximum limit of 13.3 mg L^?1. Some sites showed E. coli values above those of non-contaminated regions. Besides the effects of sewage discharges into the water-courses, agriculture activities and the use of the area for cattle husbandry influenced the quality of the river waters, for instance, the pH of a spring-water sample reached the value of 4.3. The São Bartolomeu Stream has been contributing to the deterioration of the water quality of the Turvo Sujo River, while the Turvo Limpo River has also been affected by anthropogenic discharges in the Turvo Sujo River. The speciation of Cd, Cu and Pb showed that these metals were mainly found in the particulate fraction (i. e., associated with the suspended material). Fifty five percent of the water samples showed labile Zn concentrations greater than that of the nonlabile Zn.     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

The environmental behaviour of polychlorinated phenols and its relevance to cork forest ecosystems: a review

Pentachlorophenol (PCP) has been used as a herbicide, biocide and preservative worldwide since the 1930s and as a result, extensive and prolonged contamination exists. The environmental impact increases when its many degradation products are taken into consideration. A number of chloroanisols and their related chlorophenols have been found in cork slabs collected from Portuguese oak tree forests before stopper manufacturing, and contamination by PCP and polychlorinated anisole (PCA) has been detected in Canadian forests. It is suggested that the use of polychlorinated phenols, in particular PCP, is thought to be a cause of the cork taint problem in wine, a major socio-economic impact not only for industry but on sensitive and highly biodiverse ecosystems. It also highlights particular issues relating to the regional regulation of potentially toxic chemicals and global economics world wide. To fully understand the impact of contamination sources, the mechanisms responsible for the fate and transport of PCP and its degradation products and assessment of their environmental behaviour is required. This review looks at the current state of knowledge of soil sorption, fate and bioavailability and identifies the challenges of degradation product identification and the contradictory evidence from field and laboratory observations. The need for a systematic evaluation of PCP contamination in relation to cork forest ecosystems and transfer of PCP between trophic levels is emphasised by discrepancies in bioaccumulation and toxicity. This is essential to enable long term management of not only transboundary contaminants, but also the sustainable management of socially and economically important forest ecosystems.