Phosphorus effect on Zn adsorption-desorption kinetics in acid soils

The adsorption-desorption kinetics of Zn in the absence and presence of P was studied by using the stirred flow chamber technique. The results thus obtained were compared with those previously obtained for Cu. As with copper, the simultaneous addition of P and Zn in a 1:1 mole ratio to soil was found to significantly increased Zn adsorption relative to the absence of P. Unlike Cu, however, Zn was only adsorbed at fast adsorption sites in the absence of P. In any case, the increased adsorption of Zn in the presence of P was largely due to slow adsorption sites, where Zn²⁺ ion acted as a bridging element between P and organic matter. Following adsorption in both the presence and absence of P, Zn was desorbed to a much higher extent than was Cu. However, the proportion of Zn desorbed after adsorption in the presence of P was significantly lower than in the absence of P. This indicates that Zn binds more strongly to adsorbing surfaces in the presence of P than in its absence.     

Oxidative stress, cytoxicity, and cell mortality induced by nano-sized lead in aqueous suspensions

This paper reports on the effect of aqueous and nano-particulated Pb on oxidative stress (lipid peroxidation), cytoxicity, and cell mortality. As determined by the Thiobarbituric Acid Reactive Substances (TBARS) method, only 6 h after incubation aqueous suspensions bearing nano-sized PbO₂, soluble Pb(II), and brain-homogenate only suspensions, were determined to contain as much as ca. 7, 5, and 1 nmol TBARS mg protein⁻¹, respectively. Exposure of human cells (central nervous system, prostate, leukemia, colon, breast, lung cells) to nano-PbO₂ led to cell-growth inhibition values (%) ca. ≤18.7%. Finally, as estimated by the Artemia salina test, cell mortality values were found to show high-survival larvae rates. Microscopic observations revealed that Pb particles were swallowed, but caused no mortality, however.     

Lichens as an integrating tool for monitoring PAH atmospheric deposition: A comparison with soil, air and pine needles

The aim of this study was to validate lichens as biomonitors of PAH atmospheric deposition; for that, an inter-comparison between the PAH profile and concentrations intercepted in lichens with those of air, soil and pine needles was performed. The study was conducted in a petro-industrial area and the results showed that PAH profiles in lichens were similar to those of the air and pine needles, but completely different from those of soils. Lichens accumulated higher PAH concentrations when compared to the other environmental compartments and its concentrations were significantly and linearly correlated with concentrations of PAHs in soil; we showed that a translation of the lichen PAHs concentrations into regulatory standards is possible, fulfilling one of the most important requirements of using lichens as biomonitors. With lichens we were then able to characterize the air PAHs profile of urban, petro-industrial and background areas.     

Effect of liquid cow manure on andisol properties and atrazine adsorption

Application of animal manure amendments to agricultural soils is a common practice to improve soil fertility through the addition of essential plant nutrients. This practice may increase the potential for atrazine (2-chloro-4-ethylamino-6-isopropylamino-1, 3, 5-triazine) leaching due to competition for adsorption sites between the pesticide and dissolved organic carbon (DOC) added through manure. We evaluated the influence of liquid cow manure (LCM) application on soil properties, atrazine adsorption, and the physicochemical controlling mechanisms in an Andisol. The LCM was applied at rates equivalent to 0, 100,000, 200,000, and 300,000 L ha(-1), resulting in treatments S-0, S-100, S-200, and S-300, respectively. The LCM application increased DOC and pH of the soils immediately on addition, but pH returned to S-0 values 30 d after application. The LCM application did not modify atrazine adsorption with the two lowest application rates (S-100 and S-200), but atrazine adsorption was decreased in S-300 (K(f) = 0.96) compared with the control (S-0) (K(f) = 1.19), possibly due to the competitive adsorption of DOC with the pesticide. The Fourier-transformed infrared analysis showed that LCM increased aliphaticity and presence of N-containing groups and polysaccharide-like groups in amended soils; however, these properties did not modify the atrazine interaction in the studied amended soils. Interestingly the addition of DOC to soil at the high application rate (S-300) reduced atrazine adsorption in this rich OM Andisol despite the LCM not raising the concentration of stable organic matter. The application of high rates of liquid manure containing DOC incurs an increased risk of pesticide leaching.     

Arsenic removal from water employing heterogeneous photocatalysis with TiO2 immobilized in PET bottles

Arsenic oxidation (As(III) to As(V)) and As(V) removal from water were assessed by using TiO₂ immobilized in PET (polyethylene terephthalate) bottles in the presence of natural sunlight and iron salts. The effect of many parameters was sequentially studied: TiO₂ concentration of the coating solution, Fe(II) concentration, pH, solar irradiation time; dissolved organic carbon concentration. The final conditions (TiO₂ concentration of the coating solution: 10%; Fe(II): 7.0 mg l⁻¹; solar exposure time: 120 min) were applied to natural water samples spiked with 500 μg l⁻¹ As(III) in order to verify the influence of natural water matrix. After treatment, As(III) and total As concentrations were lower than the limit of quantitation (2 μg l⁻¹) of the voltammetric method used, showing a removal over 99%, and giving evidence that As(III) was effectively oxidized to As(V). The results obtained demonstrated that TiO₂ can be easily immobilized on a PET surface in order to perform As(III) oxidation in water and that this TiO₂ immobilization, combined with coprecipitation of arsenic on Fe(III) hydroxides(oxides) could be an efficient way for inorganic arsenic removal from groundwaters.     

Metallothionein levels in Algerian mice (Mus spretus) exposed to elemental pollution: an ecophysiological approach

The potential use of metallothioneins (MTs) as biomarkers of trace metal contamination was evaluated for the first time in the Algerian mouse (Mus spretus). Mice were collected seasonally in an abandoned mining area (Aljustrel) and in a reference area, both located in southern Portugal. MT levels were quantified in liver and kidney by differential pulse polarography and hepatic elemental concentrations (Mn, Fe, Cu, Zn, Se) were determined by particle-induced X-ray emission. Hepatic iron and selenium concentrations were elevated in mice from Aljustrel mine when compared to reference animals. MTs levels were averagely higher in mice from Aljustrel than those originated from the reference area. A season-dependent significant effect was found on the hepatic and renal MT concentrations, characterized by higher levels in winter and lower in autumn. In contaminated mice positive relationship between liver elemental contents (Cu in autumn and Fe in winter) and MTs were found. The seasonal variation of MT suggests that probably physiological and environmental factors could influence hepatic and renal MT induction. Results seem to imply that some environmental disturbance occur in the vicinity of the Aljustrel mine. Therefore, for the management purposes MT levels should be followed in liver of M. spretus, especially in winter. Furthermore, other physiological factors that could influence MT expression and turnover in Algerian mouse should also be monitored.     

Dibenzothiophene oxidation by horseradish peroxidase in organic media: effect of the DBT:H2O2 molar ratio and H2O2 addition mode

Its is well known that in the biodesulfurization (BDS) process the low water solubility of sulfur compounds hinders its transference from the oil phase to the cells being the rate-limiting step in the metabolism of dibenzothiophenes (DBT). Thus sulfur compounds derivatives with high water solubility could be more easily transported increasing the BDS efficiency. The present work performed a stepwise evaluation of the enzymatic oxidation of DBT by horseradish peroxidase (HRP). Reactions were carried out in monophasic organic media containing 25% (v/v) acetonitrile. The following parameters were evaluated: DBT:H2O2 molar ratio (1:1-1:20); H2O2 addition mode (single or stepwise); pH (6.0-8.0) and temperature (37-50 degrees C). Best results were observed in a reaction medium at pH 8.0 presenting HRP 0.06IUml(-1), DBT 0.267mM, DBT:H2O2 molar ratio of 1:20 (stepwise hydrogen peroxide addition) and incubated at 45 degrees C for 60min. Under these conditions 60% of DBT was converted into dibenzothiophene sulfoxide (12%) and dibenzothiophene sulfone (46%). The DBT oxidation rate observed in this work, of 5mmolmin(-1)g(-1) of HRP, was 250-fold higher than the BDS rate, 20mumolmin(-1)g(-1) of catalyst. As such a combined enzyme-microbial desulfurization process could be envisaged. Products were determined by HPLC RP C-18.     

Soil vapor extraction in sandy soils: influence of airflow rate

Airflow rate is one of the most important parameters for the soil vapor extraction of contaminated sites, due to its direct influence on the mass transfer occurring during the remediation process. This work reports the study of airflow rate influence on soil vapor extractions, performed in sandy soils contaminated with benzene, toluene, ethylbenzene, xylene, trichloroethylene and perchloroethylene. The objectives were: (i) to analyze the influence of airflow rate on the process; (ii) to develop a methodology to predict the remediation time and the remediation efficiency; and (iii) to select the most efficient airflow rate. For dry sandy soils with negligible contents of clay and natural organic matter, containing the contaminants previously cited, it was concluded that: (i) if equilibrium between the pollutants and the different phases present in the soil matrix was reached and if slow diffusion effects did not occur, higher airflow rates exhibited the fastest remediations, (ii) it was possible to predict the remediation time and the efficiency of remediation with errors below 14%; and (iii) the most efficient remediation were reached with airflow rates below 1.2 cm(3)s(-1) standard temperature and pressure conditions.     

Vegetation as an Indicator of Soil Properties and Water Quality in the Akarçay Stream (Turkey)

In this study, the relationship among water quality, soil properties, and plant coverage in the region of the Akarçay stream was examined. Correlation analyses were carried out between soil samples taken from each of four plant communities in the Akarçay basin and water in the Akarçay stream. The four plant communities in the study area are as follows: Limonium lilacinum (Boiss. et Bal.) Wag., Alhagi pseudalhagi (M. Bieb.) Desv. Peganum harmala L., and Hordeum marinum Huds. subsp. marinum. B, Cl, EC, K, Mg, Na, pH, and SO₄ data from both soil and water samples were subjected to statistical analysis, and significant correlations were obtained (p < 0.05). These correlations indicated that the chemical features of the soil had a major effect on water quality. The important parameters were B, Cl, EC, K, Mg, Na, pH, and SO₄ for Limonium lilacinum communities; Ca, K, and pV for Peganum harmala; and B, Cl, Mg, pH, and pV for Alhagi pseudalhagi. There were also statistically significant relationships (p < 0.05) among the parameters examined. These findings strongly suggested that these plant communities can be used as indicators for soil chemistry and water quality.     

Recovery of PET from packaging plastics mixtures by wet shaking table

Recycling requires the separation of materials appearing in a mass of wastes of heterogeneous composition and characteristics, into single, almost pure, component/material flows. The separation of materials (e.g., some types of plastics) with similar physical properties (e.g., specific gravity) is often accomplished by human sorting. This is the case of the separation of packaging plastics in municipal solid wastes (MSW). The low cost of virgin plastics and low value of recycled plastics necessitate the utilization of low cost techniques and processes in the recycling of packaging plastics. An experimental study was conducted to evaluate the feasibility of production of a PET product, cleaned from PVC and PS, using a wet shaking table. The wet shaking table is an environmentally friendly process, widely used to separate minerals, which has low capital and operational costs. Some operational variables of the equipment, as well as different feed characteristics, were considered. The results show that the separation of these plastics is feasible although, similarly to the mineral field, in somewhat complex flow sheets.