Evaluation of biomarkers in caged fishes and mussels to assess the quality of waters in a bay of the NW Mediterranean Sea

Specimens of sea bass (Dicentrarchus labrax) were placed in cages for 1 month in spring and autumn at different locations in the Bay of Cannes (NW Mediterranean). Biochemical markers evaluated were: ethoxyresorufin O-deethylase (EROD) and glutathione S-transferase (GST) activities in fish livers and acetylcholinesterase (AChE) activity in fish muscle. EROD and GST activities were higher in front of the outlet for the wastewater plant of Cannes and in the harbour than outside the marina. High EROD and GST activities may be induced by petrol hydrocarbons and/or polychlorinated biphenyls (PCBs). AChE was low in the muscles of the fish caged in the harbour compared with samples from the other cages. Low AChE activity could suggest the presence of organophosphorus and carbamate compounds in seawater from the harbour. Mussels (Mytilus galloprovincialis) were caged off Cannes for the same periods as the fishes. Heavy metal, metallothionein (MT) concentrations and lysosomal membrane stability were evaluated in the digestive gland of the mussels. Results show low heavy metal and MT concentrations, implying low metal concentrations in the surrounding waters. High lysosomal membrane stability revealed a good physiological status of these animals after caging. The whole set of data indicates that seawater in the Bay of Cannes appeared to be unpolluted as regards pollutants which may induce the measured biomarkers, except in restricted areas.     

Improvement of coagulation-flocculation process using anionic polyacrylamide as coagulant aid

A physicochemical treatment (coagulation-flocculation) was applied to a slaughterhouse wastewater, using anionic polyacrylamide as coagulant aid to improve the settling velocity of the flocs formed with the coagulants used: ferric sulphate, aluminium sulphate and polyaluminium chloride. The optimum speed and stirring time for the flocculation stage were ascertained along with the optimum pH and coagulant and coagulant aid doses. The speed and coagulation time were initially set according to recommendations in the literature concerning the treatment of this type of water. Chemical oxygen demand (COD), biochemical oxygen demand at 5 days (BOD5) and total suspended solids (TSS) were recorded at the beginning and end of each experiment in order to monitor the process. Once the optimal conditions had been established, several parameters were measured in order to assess the coagulation-flocculation process: particle number and size, sludge volume, nutrients (ammonia nitrogen, total Kjeldahl nitrogen, albuminoid nitrogen, orthophosphate, total phosphorus) and the residual concentration of iron and aluminium in clarified water. Anionic polyacrylamide, when added with ferric sulphate or polyaluminium chloride led to a significant increase in the settling speed.     

Tradescantia pallida cv. purpurea boom in the characterization of air pollution by accumulation of trace elements

Tradescantia pallida cv. purpurea, a plant species widely employed for ornamentation in Brazil, has been successfully used for monitoring the genotoxicity of various agents by the micronucleus assay. To amplify knowledge about its suitability as a bioindicator species, its capacity for accumulating trace elements from urban air pollution was evaluated. T. pallida was rooted using standardized soil, and the vases were distributed in two highly polluted sites of the urban area of S?o Paulo, Brazil (Cerqueira Cesar and Congonhas districts), and in one unpolluted control site situated approximately 50 km from downtown S?o Paulo (in Caucaia do Alto). Approximately six months after exposure to pollutants, adult leaves of this plant were collected monthly for 12 months. The leaves were washed with deionized water, dried, and ground for analyses. Characterization of element levels was carried out by neutron activation analysis. Powdered samples and standards were irradiated at the IEA-R1 nuclear reactor for short and long periods, and concentrations of As, Ba, Br, Ca, Ce, Cl, Cr, Co, Fe, K, La, Mn, Na, Rb, Sb, Sc, Sr, Th, and Zn were determined. Analysis of variance applied to the results indicated that samples from polluted sites present the highest concentrations of Ba, Ce, Cr, Co, Fe, La, Sb, and Sc (p < 0.05). Discriminant analysis revealed that it was possible to distinguish the two polluted areas with a precision of 97.5%, based on the amount of pollutant elements measured in the plants at each site. The results indicated the potential use of T. pallida as an accumulator plant for air pollution biomonitoring.     

Carbon dioxide adsorption and cycloaddition reaction of epoxides using chitosan–graphene oxide nanocomposite as a catalyst

One of today's major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide(CO2) adsorption and conversion to valuable products by an ecofriendly approach based in chitosan/graphene oxide(CSGO) nanocomposite film. Rheological behavior indicates that the CSGO has a better solvation property than the pure chitosan. An adsorption capacity of 1.0152 mmol CO_2/g of CSGO nanocomposite at4.6 bar was observed. The catalytic behavior of the CSGO nanocomposite in the presence of tetra-n-butylammonium iodide(n-Bu4 NI) as co-catalyst was evaluated for the cycloaddition of CO_2 to epoxides, to give cyclic carbonates, in the absence of any solvent. These results strongly suggest that the CSGO nanocomposite may open new vistas towards the development of ecofriendly material for catalytic conversion and adsorption of CO_2 on industrial scale.     

Carbon and hydrogen isotope effects during sorption of organic contaminants on carbonaceous materials

Stable carbon and hydrogen isotopes can be an efficient means to validate biodegradation of organic contaminants in groundwater since it results in an isotopic fractionation. A prerequisite in applying this method in the field is the proof that other processes decreasing the contaminant concentration are conservative with respect to isotope effects. In this paper we show for carbon isotopes of halogenated hydrocarbon compounds [trichloroethene (TCE), cis-dichloroethene (c-DCE), vinylchloride (VC)] and carbon and hydrogen isotopes of BTEX compounds (benzene, toluene, p-xylene) that no significant fractionation occurs during equilibrium sorption onto activated carbon, lignite coke and lignite. In general, effects were in the range of the reproducibility limit of the analytical instrument (0.5 per thousand for delta13C, and 8 per thousand for delta2H). This observation was made for fractions sorbed of less than 5% to more than 95%. Also for rate-limited sorption of TCE onto activated carbon, no significant fractionation in carbon isotopes could be observed. These findings support the assumption that for these classes of compounds, sorption processes in aquifer systems are conservative with respect to isotope effects.     

Measurements of carbonyls in a 13-story building

BACKGROUND, AIM AND SCOPE: Formaldehyde and acetaldehyde are emitted by many mobile and stationary sources and secondary aldehydes are intermediates in the photo-oxidation of organic compounds in the atmosphere. These aldehydes are emitted indoors by many materials such as furniture, carpets, heating and cooling systems, an by smoking. Carbonyls, mainly formaldehyde and acetaldehyde, have been studied because of their adverse health effects. In addition, formaldehyde is a suspected carcinogen. Therefore, the concentrations of formaldehyde and acetaldehyde were determined to assess the inhalation exposure doses to carbonyls for people who work in a 13-story building and in order to evaluate the cancer hazard. METHODS: Carbonyl compounds in indoor and outdoor air were measured at a 13-story building located in Mexico City. The mezzanine, fifth and tenth floors, and the third level-parking garage were selected for sampling. Samples were collected in two sampling periods, the first from April 20 to 29, 1998 and the second from December 1 to 20, 1998. Carbonyls were sampled by means of DNHP-coated cartridges at a flow rate of 1 l min(-1) from 9:00 to 19:00 hours, during 2-hour time intervals and analyzed by HPLC with hours, during 2-hour time intervals and analyzed by HPLC with UV/VIS detection. RESULTS: Mean carbonyl concentrations were highest in the 3rd level-parking garage, with the formaldehyde concentration being the highest ranging from 108 to 418 microg m(-3). In working areas, the highest carbonyl arithmetic mean concentrations (AM) were observed on the 5th floor. Acetone and formaldehyde concentrations were highest in April ranging from 161 to 348 microg m(-3) (AM = 226) and from 157 to 270 microg m(-3) (AM = 221), respectively. Propionaldehyde and butyraldehyde were present in smaller concentrations ranging from 2 to 25 and 1 to 28 microg m(-3), respectively, considering all the samples. Mean indoor/outdoor ratios of carbonyls ranged from 1.8 to 9.6. A reduction of inhalation exposure doses of 41% and 45% was observed in the fifth floor air after the air conditioning systems had been repaired. Formaldehyde and acetaldehyde concentrations were higher in smoking environments. CONCLUSION: Indoor carbonyl concentrations were significantly greater than outdoor concentrations. Tobacco smoke seems to be the main indoor source of formaldehyde. After the air conditioning system was maintained and repaired (as was recommended), an important reduction in the emission of formaldehyde and acetaldehyde was achieved on all floors, except for the 3rd level parking garage, thereby reducing the inhalation exposure doses. RECOMMENDATION: The results obtained in this research demonstrated that maintenance of air conditioning systems must be carried out regularly in order to avoid possible adverse effects on health. Additionally, it is mandatory that isolated smoking areas, with air extraction systems, be installed in every public building.     

Mechanical Properties, Water Vapor Permeability and Water Affinity of Feather Keratin Films Plasticized with Sorbitol

In poultry industry chicken feathers are normally hydrolyzed and used to prepare animal feed. In this work the use of this material to prepare films was investigated. Keratins were extracted from chicken feathers with 2-mercaptoethanol in concentrated urea solution using sodium dodecyl sulfate (SDS). The effect of varying the amount of sorbitol on properties of chicken feather keratin (CFK) was investigated. As the concentration of plasticizer increased, the moisture content (MC) of these films increase, the monolayer MC increased from 0.060 (without plasticizer) to 0.482 g water/g dry matter (0.30 g sorbitol/g keratin). The water vapor permeability (WVP) varied between 0.096 g/m s Pa and 8.098 g/m s Pa for films without sorbitol and with 0.30 g sorbitol/g keratin, respectively. Film strength decreased from 5.13 MPa to 0.45 MPa and the elongation at break achieved the maximum value of 52.75% for samples with 0.02 g sorbitol/g keratin. The dry matter density didn’t change significantly, varying between 0.86–0.89 g/cm³ for all samples. Films with potential applications in food packaging can be obtained from CFKs. However, further researches are necessary to decrease film solubility and increase mechanical resistance.     

Physical and chemical characterisation of metal finishing industrial wastes

In EU countries approximately 150,000 tons/year of galvanic sludges are generated by 4000 industrial units from the corresponding wastewater treatment plants. These sludges are generally classified as hazardous (European Waste Catalogue as adopted in Council Decision 2000/532/CE and as amended by Decisions 2001/118/EC, 2001/119/EC and 2001/573/CE), basically due to the presence of heavy metals. This work attempts to better understand the physical and chemical characteristics of these sludges, by studying 39 samples collected in different Portuguese industries that should represent all kinds of similar wastes independent of their place of generation. Chemical composition and leaching characteristics are given, together with density, grain size distribution, and specific surface area values. Statistical analysis was used for grouping the wastes according to chemical parameters, which might be useful to predict potential reuse as raw materials for different applications.     

Heterochromatin decondensation in chromosomes from chorionic villus samples

The spontaneous decondensation of constitutive heterochromatic regions of chromosomes 1, 9, 16, and Y has been observed in 46.6 per cent of chorionic villus samples. This type of decondensation is occasionally observed in amniotic fluid cells (9 per cent) and has never been found in fetal lymphocytes. The phenomenon is similar to that described in spermatogonial metaphases, in primary and secondary spermatocytes and in human sperm chromosomes, although decondensation of the heterochromatin of chromosome 15 has never been recorded in chorionic villus samples.     

Donax trunculus and Venus verrucosa as bioindicators of trace metal concentrations in Mauritanian coastal waters

Trace-metal concentrations (Cd, Cu, Fe, Mn and Zn) were investigated in two species of abundant filter-feeding molluscs from Mauritania, the wedge shell Donax trunculus L. and the clam Venus verrucosa L. D. trunculus were collected on the beach of Nouakchott at low tide and V. verrucosa were sampled at the Banc d'Arguin at depths varying from 10 to 20 m, in mid-February 1987. D. trunculus contains significantly higher Fe and Zn concentrations than the clam. Total trace-metal content per individual (Y) in D. trunculus could be related to body weight (W) as the power function Y=aW ^b . The subsequent regression coefficient b was >1 for Cu, Fe, Mn and Zn and >1 for Cd. Metal concentrations in both species decreased in the order: Fe>Zn>Mn>Cu>Cd. Comparison of trace-metal concentrations in the small D. trunculus and the large V. verrucosa revealed lower contents in V. verrucosa, except for Cd. The trace-metal distribution in the various organs of V. verrucosa indicates that gills seem to concentrate metals, except Cu, to a greater degree than the other organs (visceral mass and remainder). The relatively elevated content of Fe in D. trunculus and of Cd, Fe and Zn in the gills of V. verrucosa seem to be of natural origin. In view of the scarcity of Mytilus sp. along the Mauritania coast, the molluscs D. trunculus and V. verrucosa are proposed as useful bioindicators of trace-metal concentrations.