Inhibition and recovery of serum,liver and brain acetylcholinesterase activities in rats exposed to new groups of O-ethyl phosphoramidates and benzo-1,3,2-dioxaphospholenes

Searching for new organophosphorus compounds with minimum effects on acetylcholinesterase of non-target organism especially mammals has gained an increased attention in the public concern. In this effort, the effects of some recently introduced O-ethyl phosphoramidates and benzo-1,3,2-dioxaphospholenes on rat acetylcholinesterase in different tissues have been evaluated in vivo and compared with the effects of fenitrothion, a commercial pesticide with reported moderate toxicity to mammals. The tested compounds were introduced orally in a single dose of 85?mg/kg body weight. Results indicated that the tested phosphoramidates lowered the enzyme activity to 54–69, 36–71 and 70–76% of its normal activity in serum, liver and brain, respectively. Meanwhile, the enzyme activity was depressed by fenitrothion to 11, 2 and 11% in the mentioned organs respectively. The lower anticholinesterase activity of the examined phosphoramidates than that of fenitrothion was attributed to their low hydrophobicity and low electrophilicity of their phosphorus atom, which reduces their interaction with the enzyme active site.     

Experimental investigation on the impact sensitivity of a match head composition influenced by the surface roughness of in-process contact materials

This study is aimed to investigate the influence of contact materials and their surface roughness on impact sensitivity of a match head composition. It was found that there were variations to the impact sensitivity, ranging from 2 to 14.7 J. The sensitivity response was quicker in case of steel–steel anvil combinations than with aluminium–aluminium anvil and brass–brass anvil combinations. The match head composition was found to be highly hazardous at the surface roughness values of 1.67, 1.80, and 1.60 μm for steel, aluminium and brass material surfaces, respectively. Such data are not available hitherto.     

Hazardous healthcare waste management in the Kingdom of Bahrain

Hazardous healthcare waste has become an environmental concern for many developing countries including the Kingdom of Bahrain. There have been several significant obstacles facing the Kingdom in dealing with this issue including; limited documentation regarding generation, handling, management, and disposal of waste. This in turn hinders efforts to plan better healthcare waste management. In this paper, hazardous waste management status in the Kingdom has been investigated through an extensive survey carried out on selected public and private healthcare premises. Hazardous waste management practices including: waste generation, segregation, storage, collection, transportation, treatment, and disposal were determined. The results of this study along with key findings are discussed and summarized. In addition; several effective recommendations and improvements of hazardous waste management are suggested.     

Tributyltin pollution in sediments from Alexandria's coastal areas

Presence of Tributyltin (TBT) in Alexandria's coastal water areas has been demonstrated by measuring concentrations of this compound. The TBT was measured in sediments from three docking areas namely: Western Harbour, Eastern Harbour and Abu Qir Bay. The sediment of those areas has been affected by marine traffic and other industrial activities. This is reflected by the distribution of TBT in the sediments nearby the shipyards in the three docking areas of the region where the average values of 258.6 ηg TBT/g for Western Harbour; 126.4 ηg TBT/g dw for Abu Qir Bay and 42.3 ηg TBT/g dw for the Eastern Harbour were recorded. This fact reflects the effect of industry and marine traffic on the marine environments of the Alexandria region.     

Synthesis and characterization of drinking water treatment plant sludge-incorporated Portland cement

Kinetic analysis of thermally activated phase transformations in drinking water treatment plant (DWTP) sludge suggests its applicability in the materials of construction. The suggested prediction has already been verified on the sludge-based bricks. The present study deals with incorporating the same sludge in the raw meal for the synthesis of Portland cement clinkers. For this purpose, two raw meals are prepared with varying sludge loadings. The sludge effect on reactivity of the crude mixture is evaluated on the basis of the free lime content sintered at various elevated temperatures. The results of chemical and mineralogical and scanning electron microscopic analyses reveal fine mineralogical contents of Portland clinkers calcined at 1450 and 1500 °C. Moreover, the cements prepared from these clinkers by the introduction of certain proportions of gypsum, depict significant durability. The obtained results elucidate that the studied DWTP sludge-incorporated Portland cement shows considerable potential to be commercialized.     

Characterization of dry fractions contained in municipal solid waste in developing countries: a case study of a region in Morocco

Journal of Material Cycles and Waste Management - Despite its impact on the environment, the most widely used method for waste management in African countries is landfilling. Energy recovery, in...     

Climate change risks in Sahelian Africa

Analyses of Sahel regional and country-specific rainfall and temperature time series derived from a fixed subset of stations show the well-documented large-scale decreasing trend in rainfall that occurred between 1970 and 2000 and also, an increasing trend in summertime maximum and wintertime minimum temperatures. The evolution of summertime mean maximum temperature is almost opposite to that of rainfall, and a significant correlation is observed between the evolution of this quantity and millet yields, in comparison with correlation with summertime rainfall. It appears that quantifying future vulnerability of the Sahel zone to climate change is rather difficult because climate models have not in general shown yet a satisfactory reproduction of the observed climate variability of this area.     

Risk assessment of heavy metal toxicity of soil irrigated with treated wastewater using heat shock proteins stress responses: case of El Hajeb,Sfax, Tunisia

Heavy metal contamination of soil resulting from treated wastewater irrigation can cause serious concerns resulting from consuming contaminated crops. Therefore, it is crucial to assess hazard related to wastewater reuse. In the present investigation, we suggest the use of biomarker approach as a new tool for risk assessment of wastewater reuse in irrigation as an improvement to the conventional detection of physicochemical accumulation in irrigated sites. A field study was conducted at two major sites irrigated with treated wastewater and comparisons were made with a control site. Different soil depths were considered to investigate the extent of heavy metal leaching, the estrogenic activity, and the biomarker response. Results have shown that a longer irrigation period (20 years) caused a slight decrease in soil metal levels when compared to the soil irrigated for 12 years. The highest levels of Cr, Co, Ni, Pb, and Zn were detected at 20 and 40 cm horizons in plots irrigated with wastewater for 12 years. The latter finding could be attributed to chemical leaching to deeper plots for longer irrigation period. Furthermore, the treated wastewater sample showed a high estrogenic activity while none of the soil samples could induce any estrogenic activity. Regarding the stress response, it was observed that the highest stress shown by the HSP47 promoter transfected cells was induced by a longer irrigation period. Finally, the treated wastewater and the irrigated soils exhibited an overexpression of HSP60 in comparison with reference soil following 1 h exposure. In conclusion, in vitro techniques can be efficiently used to assess potential hazard related to wastewater reuse.     

Behavior of two phenyl urea herbicides in clayey soils and effect of alternating dry-wet conditions on their availability

Adsorption and mobility of linuron (3-(3,4-dichlorophenyl)-1-methoxy-1-methylurea) and diuron (3-(3,4-dichlorophenyl)-1, 1-dimethylurea) were studied in clayey soils from the Gharb area (Morocco). Soils A and B were planted with sun flower (Helianthus annuus) while soil C was planted with sugar cane (Saccharum offcinarum). Adsorption was studied for linuron in soils A and B, while mobility was studied only in soil B. Adsorption data were found to fit the Freundlich equation with correlation coefficients r2 > 0.9. Freundlich coefficients (Kf, nf) were in agreement with L and S isotherm types for soils A and B, respectively. Values of Koc (195 and 102) indicate moderate adsorption. Desorption isotherms for linuron showed hysteresis for both soils. The pesticide would be more bound to soil A (H = 8.44) than to soil B (H = 4.01). The effect of alternating wet and dry conditions was tested for soils A and B. Results showed that retention would increase in soil subject to an additional wet and dry cycle. In the case of diuron isotherm was of type L in soil C. Desorption was noticeable at high concentrations and tended to decrease when concentrations diminished. Mobility of linuron was tested in polyvinyle chloride (PVC) columns, which received different treatments before their percolation. The pesticide was more mobile in a previously saturated column. In columns subject to a drying step after saturation with water, linuron mobility was greatly reduced.