Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

Determining the robust optimal set of BMPs for urban runoff management in data-poor catchments

Mismanagement of urban runoff can result in inundation which causes serious problems in providing urban services. Best management practices (BMPs) are used for urban runoff management. In this study, a method is proposed to determine the robust optimal set of BMPs for runoff management in data-poor catchments in urban areas. This method includes five main steps: (1) Sensitivity analysis to determine effective parameters in rainfall-runoff simulation model, (2) Calibration of the rainfall-runoff model based on selected effective parameters, (3) Developing a multi-objective optimization model to obtain the optimal sets of BMPs, (4) Selecting the final solutions using the Nash approach for ranking, (5) Evaluation of the robustness of the selected solution using the Management Option Rank Equivalence method. The proposed method is examined in an urban basin located in the north of Tehran, Iran. The results show that the proposed approach provides reliable results for urban runoff management in data-poor areas.     

Evaluation of PCA and Gamma test techniques on ANN operation for weekly solid waste prediction

Artificial neural networks (ANNs) are suitable for modeling solid waste generation. In the present study, four training functions, including resilient backpropagation (RP), scale conjugate gradient (SCG), one step secant (OSS), and Levenberg–Marquardt (LM) algorithms have been used. The main goal of this research is to develop an ANN model with a simple structure and ample accuracy. In the first step, an appropriate ANN model with 13 input variables is developed using the afore-mentioned algorithms to optimize the network parameters for weekly solid waste prediction in Mashhad, Iran. Subsequently, principal component analysis (PCA) and Gamma test (GT) techniques are used to reduce the number of input variables. Finally, comparison amongst the operation of ANN, PCA-ANN, and GT-ANN models is made. Findings indicated that the PCA-ANN and GT-ANN models have more effective results than the ANN model. These two models decrease the number of input variables from 13 to 7 and 5, respectively.     

Acute and chronic toxicity of nickel to nitrifiers at different temperatures

This study investigated the acute nickel toxicity on nitrification of low ammonia synthetic wastewater at 10, 23, and 35°C. The nickel inhibition half-velocity constants(K_(I,Ni)) for ammonia oxidizing bacteria(AOB) and nitrite oxidizing bacteria(NOB) based on Ni/MLSS ratio at 10, 23, and 35°C were 5.4 and 5.6 mg Ni/g MLSS, 4.6 and 3.5 mg Ni/g MLSS, and 9.1 and 2.7 mg Ni/g MLSS, respectively. In addition, chronic toxicity of nickel to nitrification of low ammonia synthetic wastewater was investigated at 10°C in two sequencing batch reactors(SBRs). Long-term SBRs operation and short-term batch tests were comparable with respect to the extent of inhibition and corresponding Ni/MLSS ratio. The μ_(max), b, and K_o of AOB were 0.16 day~(-1), 0.098 day~(-1) and 2.08 mg O_2/L after long-term acclimatization to nickel of 1 mg/L at 10°C, high dissolved oxygen(DO)(7 mg/L) and long solids retention time(SRT) of 63–70 days. Acute nickel toxicity of nitrifying bacteria was completely reversible.     

Spatial and temporal variability of fluoride concentrations in groundwater resources of Larestan and Gerash regions in Iran from 2003 to 2010

Environmental Geochemistry and Health - There is discrepancy about intervals of fluoride monitoring in groundwater resources by Iranian authorities. Spatial and temporal variability of fluoride in...     

Statistical analysis of arsenic contamination in drinking water in a city of Iran and its modeling using GIS

In this research, probable arsenic contamination in drinking water in the city of Ardabil was studied in 163 samples during four seasons. In each season, sampling was carried out randomly in the study area. Results were analyzed statistically applying SPSS 19 software, and the data was also modeled by Arc GIS 10.1 software. The maximum permissible arsenic concentration in drinking water defined by the World Health Organization and Iranian national standard is 10 μg/L. Statistical analysis showed 75, 88, 47, and 69% of samples in autumn, winter, spring, and summer, respectively, had concentrations higher than the national standard. The mean concentrations of arsenic in autumn, winter, spring, and summer were 19.89, 15.9, 10.87, and 14.6 μg/L, respectively, and the overall average in all samples through the year was 15.32 μg/L. Although GIS outputs indicated that the concentration distribution profiles changed in four consecutive seasons, variance analysis of the results showed that statistically there is no significant difference in arsenic levels in four seasons.     

Determination of radioactive elements and heavy metals in sediments and soil from domestic water sources in northern peninsular Malaysia

Soil serves as a major reservoir for contaminants as it posseses an ability to bind various chemicals together. To safeguard the members of the public from an unwanted exposure, studies were conducted on the sediments and soil from water bodies that form the major sources of domestic water supply in northern peninsular Malaysia for their trace element concentration levels. Neutron Activation Analysis, using Nigeria Research Reactor-1 (NIRR-1) located at the Centre for Energy Research and Training, Zaria, Nigeria was employed as the analytical tool. The elements identified in major quantities include Na, K, and Fe while As, Br, Cr, U, Th, Eu, Cs, Co, La, Sm, Yb, Sc, Zn, Rb, Ba, Lu, Hf, Ta, and Sb were also identified in trace quantities. Gamma spectroscopy was also employed to analyze some soil samples from the same area. The results indicated safe levels in terms of the radium equivalent activity, external hazard index as well as the mean external exposure dose rates from the soil. The overall screening of the domestic water sources with relatively high heavy metals concentration values in sediments and high activity concentration values in soil is strongly recommended as their accumulation overtime as a consequence of leaching into the water may be of health concern to the members of the public.     

Bioaccumulation of trace elements in different tissues of three commonly available fish species regarding their gender,gonadosomatic index,and condition factor in a wetland ecosystem

In the present research, accumulation of Cd, Co, Cr, Cu, Mn, Ni, Pb, V, and Zn were determined in sediments and fillet, liver, kidney, gonads, and gills of three commonly fish species in the largest wetland ecosystem that is located in southwest of Iran; Shadegan wetland. Shadegan is one of the most important wetland that posses various fauna and flora but suffers inputs from agricultural and industrial activities. So, sediment samples and fish species including Barbus grypus, Barbus sharpeyi, and Cyprinus carpio were collected during winter 2009. Results showed that mean concentrations of trace elements (except Ni and Co) were high in liver and gills of B. grypus. Also trace elements had the most accumulation in liver of B. sharpeyi except for Cd (0.26 mg kg^− 1 d.w.) and Mn (13.45 mg kg^− 1 d.w.) that were high in gills. Beside, kidney is determined as target tissue for Ni and V in B. grypus and for Pb in C. carpio, due to their high concentration. Zn levels in all tissues of C. carpio showed the highest concentrations in comparison to other fish species. Generally, accumulations of most of the studied elements in B. grypus and B. sharpeyi were higher in females than in males, while in fillet and gonads of C. carpio, this trend was inverted. Bioaccumulation factors (BAFs) were determined for different tissues of fish species with respect to elemental concentrations in sediment. BAFs results indicated that Zn, Pb, and Cu have higher BAF than other elements. Also this investigation demonstrated that trace elements have different affinities with condition factor of studied fish species. Gonadosomatic index (GSI) and Pb showed positive correlation together in both B. sharpeyi and B. grypus, respectively, in females and males. Moreover, females of C. carpio showed significantly positive relation of GSI and all studied elements.     

Determination of polychlorinated biphenyls and total mercury in two fish species (<Emphasis Type="Italic">Esox lucius</Emphasis> and <Emphasis Type="Italic">Carassius auratus</Emphasis>) in Anzali Wetland,Iran

The Anzali Wetland is one of the most important ecosystems in the north of Iran, and parts of it were registered as a Ramsar site in 1975. However, even though, due to many problems, including eutrophication produced by inflow of excess nutrients and organic materials, the wetland was also listed on the Montreux Record indicating the need to take urgent remedial action. This study was conducted to study the levels of polychlorinated biphenyls (PCBs) and total mercury (THg) in two fish species (Esox lucius and Carassius auratus) as bio-indicators of the ecosystem condition in eastern part of Anzali Wetland. The sampling was carried out in six different periods between years 2009 and 2010. The results showed that the amounts of PCBs in the muscle of northern pike were below the detection limit of gas chromatography, whereas the average concentration in goldfish was 0.449 mg/kg wet weight. Some possible reasons for the higher levels of PCBs in goldfish in comparison with pike have been discussed. No significant (p < 0.05) correlation was observed between PCBs and biological factors (weight, length, lipid content) for both species. On the other hand, the mean concentration of THg in the muscle of pike and goldfish were 182.22 and 75.27 ng/g dry weight, respectively. Although these concentrations were below US-EPA criterion for human consumption (0.3 mg/kg), it pointed up a significant deterioration of the ecosystem condition during the past years. Finally, statistical analysis revealed a significant correlation between THg with weight and an insignificant correlation with length for pike specimens.     

Performance evaluation of a bipolar electrolysis/electrocoagulation (EL/EC) reactor to enhance the sludge dewaterability

The present study aimed to evaluate the performance of a bipolar electrolysis/electrocoagulation reactor designed to enhance the sludge dewaterability. The reactor was 15 L in volume, with two series of plates used in it; Ti/RuO₂ plates for the electrolysis of the sludge, and also aluminum and iron plates for electrocoagulation process. The dewaterability of the sludge was determined in terms of its capillary suction time (CST) and specific resistance to filtration (SRF), while the degree of sludge disintegration was determined based on the value of degree of sludge disintegration (DD_SCOD). The maximum reduction in CST and SRF was observed at a detention time of 20 min and a voltage of 30 V. However, increasing of both detention time and voltage significantly increased the values of CST and SRF even to an extent that they both exceeded those of the untreated sludge. The optimal degree of sludge disintegration achieved by the present study was 2.5%, which was also achieved at a detention time of 20 min and a voltage of 30 V. As reported previously, increased DD_SCOD values led to increasing CST and SRF values, due primarily to the disruption of the sludge flocs. According to the results from the present study, it can be concluded that simultaneous application of electrocoagulation and electrolysis is effective in enhancing the sludge dewaterability, because electrocoagulation helps to achieve a higher degree of sludge disintegration while maintaining the desired sludge dewaterability.