50 Hz alternating extremely low frequency magnetic fields affect excitability,firing and action potential shape through interaction with ionic channels in snail neurones

In spite of growing concern about the influence of magnetic fields on biological systems, the interaction between extremely low frequency magnetic field (ELF magnetic fields) and biological structures at the cellular level remains obscure. The aim of this study was to investigate if 50 Hz magnetic fields could have an effect on the neuronal excitability and firing responses. Under Current-Clamp condition, exposure to 50 Hz ELF magnetic fields at 2 mT or 0.8 mT intensities resulted in an increase in the peak amplitude of action potential and after hyperpolaization potential in a time dependent manner. Both magnetic field intensities decreased also the firing frequency and the duration of action potential. Taken together, these data suggest that 50 Hz ELF magnetic fields at 2 mT or 0.8 mT intensities may change the electrophysiological behavior of neuronal cells and underlying ion channel currents.     

Optimizing stabilization of waste-activated sludge using Fered-Fenton process and artificial neural network modeling (KSOFM,MLP)

Sludge management is a fundamental activity in accordance with wastewater treatment aims. Sludge stabilization is always considered as a significant step of wastewater sludge handling. There has been a progressive development observed in the approach to the novel solutions in this regard. In this research, based on own initially experimental results in lab-scale regarding Fered-Fenton processes in view of organic loading (volatile-suspended solids, VSS) removal efficiency, a combination of both methods towards proper improving of excess biological sludge stabilization was investigated. Firstly, VSS removal efficiency has been experimentally studied in lab-scale under different operational conditions taking into consideration pH [Fe²⁺]/[H₂O₂], detention time [H₂O₂], and current density parameters. Therefore, the correlations of the same parameters have been determined by utilizing Kohonen self-organizing feature maps (KSOFM). In addition, multi-layer perceptron (MLP) has been employed afterwards for a comprehensive evaluation of investigating parameters correlation and prediction aims. The findings indicated that the best proportion of iron to hydrogen peroxide and the optimum pH were 0.58 and 3.1, respectively. Furthermore, maximum retention time about 6 h with a hydrogen peroxide concentration of 1,568 mg/l and a current density of 650–750 mA results to the optimum VSS removal (efficiency equals to 81 %). The performance of KSOFM and MLP models is found to be magnificent, with correlation ranging (R) from 0.873 to 0.998 for the process simulation and prediction. Finally, it can be concluded that the Fered-Fenton reactor is a suitable efficient process to reduce considerably sludge organic load and mathematical modeling tools as artificial neural networks are impressive methods of process simulation and prediction accordingly.     

Biofiltration of gas-phase hexane and toluene mixture under intermittent loading conditions

This paper reports the performance of a compost biofilter subjected to periodic intermittent loads of gas-phase hexane and toluene. The biofilter was operated for 10 h per day, at different empty bed residence times (4, 2 and 1.3 min), and at different inlet concentrations of hexane and toluene, varying between 2 and 3.8 g m^?3, respectively. Steady-state removal efficiency profiles, reaching more than 90% for both the pollutants, was observed after 44 days of operation. Periodic operation of the compost biofilter was characterized by an adsorption step, followed by biological conversion of the pollutants by the microorganisms inherent to the compost. After resuming daily biofilter operation, the required times for biochemical reaction to dominate the initial adsorption step was observed to be 2.5 and 1 h, respectively, for toluene and hexane. The maximum elimination capacity due to the biological step was found to be 61.6 g m^?3 h^?1. The results from this study showed the effectiveness of the biofilter to handle mixtures of gas-phase pollutants, subjected to regular intermittent operations, thus proving their worthiness for industrial use.     

A STOCHASTIC DYNAMIC PROGRAMMING MODEL FOR THE OPTIMUM OPERATION OF A MULTI-PURPOSE RESERVOIR1

ABSTRACT: The main objective of this paper is to present a stockastic dynamic programming model useful in determining the optimal operating policy of a single multipurpose surface reservoir. It is the unreliability of forecasting the amount of future streamflow which makes the problem of a reservoir operation a stochastic process. In this paper the stochastic nature of the streamflow is taken into account by considering the correlation between the streamflows of each pair of consecutive time intervals. This interdependence is used to calculate the probability of transition from a given state and stage to its succeeding ones. A dynamic programming model with a physical equation and a stochastic recursive equation is developed to find the optimum operational policy. For illustrative purposes, the model is applied to a real surface water reservoir system.     

PEAKING STORAGE TANKS FOR WATER SUPPLY SYSTEMS1

ABSTRACT: Construction of a “peaking storage tank” may reduce the operational cost of municipal water in the availability of a time-of-use energy rate. A peaking storage tank is used for storing water that is pumped from wells or other sources of supply during off-peak periods when energy costs are less for use during periods of on-peak water demand. The optimal size of a peaking storage tank is that which results in the minimum total cost, which includes both the storage construction cost and the cost of operation of the pumps. The operational cost for a given time-of-use rate is determined by help of a pipe network simulation model solved by the Newton-Raphson technique and a dynamic programming optimization model. A more simplified method is also introduced. Analyses show that low off-peak energy costs make the construction of peaking storage tanks economically attractive and reduce on-peak energy use, which results in electrical load leveling.     

RESISTANCE TO FLOW OVER RIPRAP IN STEEP CHANNELS1

ABSTRACT: A series of flume tests were conducted to determine the flow resistance of angular shaped riprap in steep channels. Flow resistance was expressed in terms of the Darcy-Weisbach friction factor and the Manning's roughness coefficient. Prototype channels of 4 ft. (1.2 m) and 12 ft. (3.7 m) in width were constructed at slopes ranging from 0.01 to 0.20. The channel beds were comprised of angular riprap of median diameters of 1, 2, 4, 5, and 6 inches (2.59, 5.59, 10.41, 12.95, and 15.75 cms). The Darcy-Weisbach and Manning's coefficients were determined for each test condition prior to bed failure. The resulting Darcy-Weisbach coefficients were related to the channel energy gradient and the bed relative submergence for highly turbulent flow. Also, Manning's roughness coefficients were related to the product of the median stone diameter and energy gradient. Because of the angular shape of the riprap and the wedging and/or packing of the bed materials, the resistance to flow was found to exceed the flow resistance values predicted by previous studies. Expressions were presented for estimating the resistance to flow for angular riprap in steep channels.     

Quality of drinking water in the Aligarh Muslim University Campus,Aligarh, U.P. (India) with respect to heavy metals

The physico-chemical characteristics of the drinking water in nine residential halls of the Aligarh Muslim University, Aligarh, U.P. (India), were studied. Nine samples each of running and standing water were taken four times over a period of one month at weekly intervals from all of the residential halls and were analysed for physico-chemical characteristics and heavy metal contents. The temperature, pH and electrical conductivity of water samples ranged between 20.0–26.0°C; 7.00–8.00 and 116.00–199.04 micromhos cm^–1 respectively whereas the values of total alkalinity, total hardness, Cl^–, SO ₄ ^– , F^–, NH₃–N, NO₂–N; NO₃–N were found between 261.00–396.00; 128.00–200.00; 8.00–69.00; 12.00–46.00; 0.90–1.35; 0.20–0.44; ND; 1.60–6.50 mg l^–1 respectively. The ranges of heavy metal concentrations in the running water samples were as follows: Cd (0.70–3.75); Cr (ND-5.00); Co (9.50–18.75); Cu (0.75–15.00); Fe (ND-13.50); Mn (3.50–51.00); Ni (7.00–17.50); Pb (0.50–2.50) and Zn (10.00–176.50) g l^–1. The heavy metal concentrations in standing water samples were found to be: Cd (1.20–4.90); Cr (ND-10.00); Co (10.25–19.00); Cu (1.75–20.00); Fe (ND-18.00); Mn (5.00–66.50); Ni (8.75–19.75); Pb (0.75–5.50) and Zn (28.60–364.00) g l^–1. The concentrations of heavy metals in drinking water supplies of the Aligarh Muslim University campus were well below the guidelines for drinking water quality as prescribed by World Health Organisation (1984). It is evident from the results that the drinking water may not cause any significant health hazard to water consumers due to heavy metals but these may be hazardous if they get accumulated in the body due to continuous consumption of water.     

A short review on hydrothermal liquefaction of livestock manure and a chance for Korea to advance swine manure to bio-oil technology

Due to the abundant supply and suitable physicochemical characteristics of livestock manure, it may be a useful biomass to produce biofuels, such as “bio-oil.” Hydrothermal liquefaction is a promising method for converting such wet biomasses into a liquid fuels and has attracted attention worldwide. In this review, the current state of research on the hydrothermal liquefaction of livestock manure biomasses is summarized. The effect of operating parameters on the yield of bio-oil is also reviewed. The fundamental characteristics of raw manure biomasses and converted oils are outlined and discussed in the paper. To reduce the use of fossil fuel and nuclear energy, the South Korean government has pledged to increase renewable energy. Based on findings from a literature review, it can be concluded that there is a chance for Korea to advance bio-oil production from the abundant and tremendous energy potential of swine manure by a hydrothermal liquefaction process.     

Potential Impact of Climate Change on Residential Energy Consumption in Dhaka City

This study aimed to assess the impacts of climate change on residential energy consumption in Dhaka city of Bangladesh. The monthly electricity consumption data for the period 2011–2014 and long-term climate variables namely monthly rainfall and temperature records (1961–2010) were used in the study. An ensemble of six global circulation models (GCMs) of coupled model intercomparison project phase 5 (CMIP5) namely, BCCCSM1-1, CanESM2, MIROC5, MIROC-ESM, MIROC-ESM-CHEM, and NorESM1-M under four representative concentration pathway (RCP) scenarios were used to project future changes in rainfall and temperature. The regression models describing the relationship between historical energy consumption and climate variables were developed to project future changes in energy consumptions. The results revealed that daily energy consumption in Dhaka city increases in the range of 6.46–11.97 and 2.37–6.25 MkWh at 95% level of confidence for every increase of temperature by 1 °C and daily average rainfall by 1 mm, respectively. This study concluded that daily total residential energy demand and peak demand in Dhaka city can increase up to 5.9–15.6 and 5.1–16.7%, respectively, by the end of this century under different climate change scenarios.     

Simultaneous effect of shift work on blood pressure and lipid profile: a path analysis

The aim of this study was to assess the direct and indirect effects of shift work (SW) on the systolic blood pressure (SBP) and lipid profile of male workers. For this purpose, a cross-sectional study was conducted involving 6539 male workers of Esfahan Mobarakeh Steel Company. From all of the participants, 3065 (46.8%) were day workers and the remainder were shift workers. The results of path analysis revealed that the most effective variables on SBP were body mass index, fasting blood sugar, triglycerides and SW with a total effect of 0.241, 0.095, 0.064 and 0.056, respectively.