Production characteristics of lipopeptide antibiotics in biofilm fermentation of Bacillus subtilis

In biofilm fermentation, from the very early moments, surfactin was produced along with the biofilm development in the lipopeptide antibiotic production medium by using Bacillus subtilis. However, almost no iturin A was produced in its first 24 hours of cultivation and the production of iturin A began much later. Volumes of the nutrient medium and available surface area of the biofilm reactors were found to be important with the relative production of these two antibiotics. Production of iturin A was increased from 12 mg to about 50 mg per reactor when the culture size was increased from 5 mL to 20 mL, as the depth of the medium was increased. The production level was saturated thereafter with larger volumes. On the other hand, surfactin production was remained similar, which was about 10 mg per reactor, from all the 5 mL to 80 mL of biofilm culture. Optimized temperature for iturin A and surfactin production was observed at 25 and 37°C, respectively. In the biofilm fermentation, production of surfactin was increased when the incubation temperature was increased within the temperature range of 25 to 37°C, on the other hand, iturin A production was gradually decreased with the increase of the incubation temperature.     

Application of malt residue in submerged fermentation of Bacillus subtilis

Malt residue is a common waste or byproduct from beer industries after brewing and milling of malted barley. In this work, Bacillus subtilis RB14 was used to study the microbial growth and production of secondary metabolites like lipopeptide antibiotic iturin A in the malt residue for its effective recycling. B. subtilis RB14 could grow in submerged fermentation of malt residue and significant growth (10⁹ CFU/mL) was observed without any supplementation. In submerged fermentation iturin A production using malt residue was about 170 mg/L, which was found to be higher than its production in No.3 (Polypepton, glucose, KH₂PO₄, MgSO₄·7H₂O) medium where production was about 120 mg/L. More than 600 mg/L of iturin A production was observed when malt residue was combinedly used with No.3 medium. This production was significantly higher than their summation of their individual production. However, the growth of B. subtilis in combined medium was found to be similar to that of the submerged fermentation in simple malt residue. Therefore, the remarkable enhancement in production of iturin A in supplemented malt residue was attributed to the nutrients supplied from No.3 medium.     

Experimental investigation of gamma-ray attenuation in Jordanian building materials using HPGe-spectrometer

The capabilities of some building materials used in Jordan to attenuate gamma radiation were tested. Measurements of the attenuation coefficients of limestone, bricks and concrete have been carried out using a HPGe-spectrometer. Narrow beam technique was used, with a multiple gamma radiation source of different energy lines. Results indicate that variations in the attenuation coefficient for all limestone samples, at the same energy line, are within the experimental uncertainties. On the basis of the results achieved, an empirical formula mu(m)=AE(-0.44) was proposed to calculate attenuation at various incident energies. Limestone of average thickness 7cm was found to stop 75% of a gamma beam of energy 662keV. Meanwhile a brick of effective thickness 7cm was found to stop 60% of the same beam. The total attenuation coefficient of concrete calculated at 1333keV was 11.2m(-1), which is less than that of limestone and bricks.     

Inbreeding and the evolution of sociality in arthropods

Animals have evolved strategies to optimally balance costs and benefits of inbreeding. In social species, these adaptations can have a considerable impact on the structure, the organization, and the functioning of groups. Here, we consider how selection for inbreeding avoidance fashions the social behavior of arthropods, a phylum exhibiting an unparalleled richness of social lifestyles. We first examine life histories and parental investment patterns determining whether individuals should actively avoid or prefer inbreeding. Next, we illustrate the diversity of inbreeding avoidance mechanisms in arthropods, from the dispersal of individuals to the rejection of kin during mate choice and the production of unisexual broods by females. Then, we address the particular case of haplodiploid insects. Finally, we discuss how inbreeding may drive and shape the evolution of arthropods societies along two theoretical pathways.     

An equal sex ratio followed by differential sex mortality causes overestimation of females in gall midges: no evidence for sex ratio regulation

Monogeny, the production of unisexual broods by individual females, has been recognized for nearly 80?years. The genetic nature of gall midges' sex determination predicts an equal numbers of male-producing and female-producing females in the populations such that the overall sex ratio is expected to be nearly 1:1. However, observations of some strictly monogenous populations with biased sex ratio, mainly toward females, have raised the question of whether gall midges are able to adjust their offspring sex ratio in response to changes in environmental conditions, and some authors have even considered sex ratio regulation as a strong force in the course of the evolution of monogeny. In this paper, first, by studying the sex ratio variations of the predatory gall midge, Aphidoletes aphidimyza within a generation, we showed that adult males emerge up to 1?day earlier and have shorter life span than females (less than 4?days and up to 6?days, respectively). Although, the sex ratio of A. aphidimyza at the time of emergence was nearly 1:1 (52.41?% males), a simple population simulation indicated that the differential mortality of sexes can lead to a female-biased sex ratio estimation (57.88?% females) under random sampling in the natural environments. Our results imply that the primary sex ratio of monogenous gall midges is nearly 1:1 and that the arrhenogenic/thelygenic gall midges are not able to alter the number of their male/female progenies in response to changes in environmental conditions.     

Morphological relationships of the Wheatears (genus Oenanthe)

The genus Oenanthe comprises approximately 22 species, of which 16 species are restricted to the desert belt of the Palaearctic and Afrotropic regions, where they are often the most conspicuous passerines. Although they have been the subjects of some morphological and ecological studies, no complete morphometrical data has been used to verify their taxonomic relationships, and, the species relationships are still debated. Overall morphometrical similarities between Wheatears and their relationships in size and shape were assessed using measurements of 27 biometrical variables on 417 museum specimens. The 22 Wheatear species comprise some morphological groups: long migratory vegetation-tolerant species (O. pleschanka, O. hispanica, O. cypriaca and O. deserti), ground-dwelling migratory (O. isabellina and O. oenanthe), and sedentary (O. bottae, O. heuglini and O. pileata) of steppe-like habitants, relatively heavy and rock-dwelling species (O. leucura and O. monticola), inhabiting the most arid areas (O. monacha, O. leucopyga and O. alboniger), and finally a central core of medium-sized partial migrants, largely overlapping in morphometric space, that do not present any evident specialization (O. lugens, O. chrysopygia, O. xanthoprymna and O. finschii). It seems Wheatear species are well distributed in a morpho-space of size and shape with moderate overlaps and few hiatuses corresponding to a morphological continuum of species. Furthermore, our results largely hiatuses corresponding to a morphological continuum of species. Furthermore, our results largely differ from previous phylogenetic hypotheses (based on ecological, behavioural, and chromatic characters), but, are in congruence with molecular data.     

Synthesis and optimization of spherical nZVI (20–60 nm) immobilized in bio-apatite-based material for efficient removal of phosphate: Box-Behnken design in a fixed-bed column

In the present study, bio-apatite/nZVI composite was synthesized through Fe(III) reduction with sodium borohydride and was fully characterized by FTIR, XRD, SEM–EDX, TEM, BET, BJH, and pH_PZC. Column experiments were carried out for the removal of phosphate as a function of four operational parameters including initial phosphate concentration (100–200 mg L^?1), initial solution pH (2–9), bed height (2–6 cm), and influent flow rate (2.5–7.5 mL min^?1) using a response surface methodology (RSM) coupled with Box-Behnken design (BBD). 2D contour and 3D surface plots were employed to analyze the interactive effects of the four operating parameters on the column performance (e.g., uptake capacity and saturation time). According to ANOVA analysis, the influent flow rate and bed height are the most important factor on phosphate uptake capacity and saturation time, respectively. A quadratic polynomial model was excellently fitted to experimental data with a high coefficient of determination (>?0.96). The RSM-BBD model predicted maximum phosphate adsorption capacity of 85.71 mg g^?1 with the desirability of 0.995 under the optimal conditions of 135.35 mg L^?1, 2, 2 cm, and 7.5 mL min^?1 for initial phosphate concentration, initial solution pH, bed height, and influent flow rate, respectively. The XRD analysis demonstrated that the reaction product between bio-apatite/nZVI composite and phosphate anions was Fe₃ (PO₄)₂. 8H₂O (vivianite). The suggested adsorbent can be effectively employed up to five fixed-bed adsorption–desorption cycles and was also implemented to adsorb phosphate from real samples.

     

Novel semi-decentralised mobile system for the sanitization and dehydration of septic sludge: a pilot-scale evaluation in the Jordan Valley

Environmental Science and Pollution Research - The provision of effective sanitation strategies has a significant impact on public health. However, the treatment of septic sludge still presents...     

Spatiotemporal analysis of COVID-19, air pollution,climate, and meteorological conditions in a metropolitan region of Iran

The COVID-19 pandemic has a close relationship with local environmental conditions. This study explores the effects of climate characteristics and air pollution on COVID-19 in Isfahan province, Iran. A number of COVID-19 positive cases, main air pollutants, air quality index (AQI), and climatic variables were received from March 1, 2020, to January 19, 2021. Moreover, CO, NO₂, and O₃ tropospheric levels were collected using Sentinel-5P satellite data. The spatial distribution of variables was estimated by the ordinary Kriging and inverse weighted distance (IDW) models. A generalized linear model (GLM) was used to analyze the relationship between environmental variables and COVID-19. The seasonal trend of nitrogen dioxide (NO₂), wind speed, solar energy, and rainfall like COVID-19 was upward in spring and summer. The high and low temperatures increased from April to August. All variables had a spatial autocorrelation and clustered pattern except AQI. Furthermore, COVID-19 showed a significant association with month, climate, solar energy, and NO₂. Suitable policy implications are recommended to be performed for improving people’s healthcare and control of the COVID-19 pandemic. This study could survey the local spread of COVID-19, with consideration of the effect of environmental variables, and provides helpful information to health ministry decisions for mitigating harmful effects of environmental change. By means of the proposed approach, probably the COVID-19 spread can be recognized by knowing the regional climate in major cities. The present study also finds that COVID-19 may have an effect on climatic condition and air pollutants.

     

Integrated multitrophic aquaculture (IMTA) as an environmentally friendly system for sustainable aquaculture: functionality,species, and application of biofloc technology (BFT)

Environmental Science and Pollution Research - Aquaculture is one of the fastest-growing industries in the world, and its prominent role has been proven in supplying food for the growing world...