Assessment of hospitalization and mortality from exposure to PM10 using AirQ modeling in Ilam,Iran

Environmental Science and Pollution Research - The aims of this study were to assess the health impact of PM10 on inhabitants and to investigate the trend of PM10 concentrations in Ilam, Iran, from...     

Optimal design of additional sampling pattern for drinking-water quality control

A crucial step in complementary studies of the water quality determination is to design the additional sampling pattern or, in other words, to determine the number and location of the additional samples. Since location and number of samples highly affect decisions’ uncertainties, and because sampling process is quite costly and time-consuming, optimization of the sampling pattern will enhance the efficiency and productivity. Solution of such an optimization problem requires defining an objective function and constraints. There exist many previous studies regarding locating additional samples in other environmental problems wherein the objective function is defined as the minimization of the kriging variance (based on the problem nature), but the point is that kriging variance is not sensitive to local variability. Since manner and extent of small-scale variations are both important and necessary in water quality studies, it is required to resolve this shortcoming of the traditional objective function. Solution is to make use of the combined variance consisting of kriging and local variances. In this study, the applicability and efficiency of the minimization of combined variance as the objective function of the additional sampling was adopted and proved for a salt marsh (east of Iran) on the basis of a simulated annealing-based algorithm. It was shown, practically, that the locational distribution of additional sampling points is quite logical and more compatible with experts’ proposed methods using this objective function (compared to the traditional one).     

Determining soil quality in urban agricultural regions by soil enzyme-based index

Urban agricultural soils are highly variable, and careful selection of sensitive indicators is needed for the assessment of soil quality. This study is proposed to develop an index based on soil enzyme activities for assessing the quality of urban agricultural soils. Top soils were collected from urban agricultural areas of Korea, and soil chemical properties, texture, microbial fatty acids, and enzyme activities were determined. The soils belonged to five textural classes with the highest frequency of sandy loam. There was no clear correlation between the soil chemical properties and soil microbial properties. Principal component analysis (PCA) and factor analysis were applied to microbial groups for identification of microbial community variation in soils. Two soil groups, namely group 1 (G1) and group 2 (G2), based on microbial community abundance were examined by PCA, and those were more prominent in factor analysis. The G1 soils showed higher microbial community abundance than G2 soils. The canonical discriminant analysis was applied to the enzyme activities of sandy loam soil to develop an index, and the index validation was confirmed using the unused soils and published data. The high-quality soils in published literature assigned the high valued index. Microbial fatty acids and soil enzyme activities can be suitable indicators for soil quality evaluation of urban agricultural soils.

     

Cadmium removal from Cd-contaminated soils using some natural and synthetic chelates for enhancing phytoextraction

The influence of a natural (citric acid) and two synthetic chelates (HEDTA, EGTA) on Cd phytoextraction with radish was studied. The experiment was conducted with Cd treatments including 0 (control), 5, 20, 60 and 100?mg?Cd?kg^?1 soil. When plants were fully developed, the designated HEDTA, EGTA and citric acid were applied to establish experimental treatments. Ten days after chelate applications, soil and plant samples were taken. Results indicated that synthetic chelates can considerably increase Cd concentration in soil solution compared with citric acid. Among the applied chelates, HEDTA provided more significant influences on soil solution. Cadmium concentration in both shoots and roots of radish was increased due to enhancing influence of chelate applications on Cd concentration in soil solution. Cadmium concentration in radish shoots was more than that of roots. This can be attributed to higher bioavailability and solubility of Cd in soil solution. In all treatments which received HEDTA, the cadmium concentration in both shoots and roots of radish was increased more than that of other applied chelates. Although HEDTA is more efficient in phytoextracting Cd than other chelates, due to durability of synthetic chelates toxic effects on soils, we recommend using larger amounts of light acids.     

Sustainable pesticide governance in Bangladesh: socio-economic and legal status interlinking environment,occupational health and food safety

Pesticides, regardless of their known toxic impacts to human health and environment, are widely used in the rapid growing agricultural sectors of developing countries. As an agricultural country with small lands and enormous population to feed, a developing country like Bangladesh rely heavily on the uses of pesticides to increase crop yields. Nevertheless, during the past decades, Peoples’ Republic of Bangladesh has experienced 26.46% decrease in total pesticide consumption. However, the presence of unregistered pesticides in the environmental samples and agricultural products has pointed out the weakness in the existing legal regime of the pesticide governance. This, in turn, is threatening the livelihood and health of the farmers, food safety and consumer health. This paper reviews the antiquity of the status of pesticide consumption, evolution and drawbacks of pesticide in the context of existing socio-economic position of Bangladesh. A consolidated uniform system is lacking to project pesticide management in the country. Existing legal policy, rules and regulations in the context of international agreements regarding pesticide management have been reviewed and suggested for further amendment. Moreover, role of green microfinance in sustainable management of pesticides and food safety were recommended. A framework is proposed for pesticide governance with a stronger pesticide surveillance program and coordination of ministries interlinking environmental, occupational health and food safety.     

Distribution and risk assessment of organochlorine contaminants in surface water from River Chenab, Pakistan

Concentrations in surface waters (including particulate phase) of the River Chenab ranged from 27-1100 ng L(-1) and 25-1200 ng L(-1) for OCPs and 7.7-110 ng L(-1) and 13-99 ng L(-1) for PCBs during summer and winter, respectively from 2007-2009. DDTs exhibited the highest concentration, followed by HCHs > chlordane > ∑(24)PCBs > ∑other OCPs. Different indicative ratios for organochlorines suggest that current use, long range transport and also past application of these chemicals contribute to the total burden. Statistical analysis highlighted agricultural and industrial activities and municipal waste disposal as main sources of OCPs and PCBs in the riverine ecosystem of the River Chenab. Risk Quotients (RQ(CCCs)) > 10 for DDTs and PCBs levels in collected water samples from the River Chenab suggest that risk from DDTs and PCBs is moderate to severe and fluxes calculated for OCPs and PCBs from the River Chenab to the Indus River were 7.5 tons per year and 1.0 tons per year, respectively.     

Source identification of polycyclic aromatic hydrocarbons (PAHs) in sediment samples from the northern part of the Persian Gulf,Iran

Samples of surface sediments from the Iranian coast of the Persian Gulf were examined to determine the levels and sources of 15 polycyclic aromatic hydrocarbons (PAHs). Samples were collected from 30 sampling sites and analyzed for PAHs by gas chromatography–mass spectrometry (GC-MS). Total concentrations of PAHs ranged from 93 to 4,077 ng g^?1 dry weight. The PAH composition from 30 sampling sites was dominated by four-ring PAH compounds. Molecular indices based on the ratios of PAH concentrations were used to differentiate PAHs from pyrolitic to petrogenic and mixed origins. The results suggested that the main sources of PAHs in sediments from the studied region were mixed pyrolitic and petrogenic. Furthermore, benthic organisms in most of the investigated areas were not at ecotoxicological risk, according to the results from the effects range low (ERL)/effects range median (ERM) techniques suggested by the US Sediment Quality Guidelines (SQGs).     

Hydride generation coupled to microfunnel-assisted headspace liquid-phase microextraction for the determination of arsenic with UV–Vis spectrophotometry

In this research, a microfunnel-assisted headspace liquid-phase microextraction technique has been used in combination with hydride generation to determine arsenic (As) by UV–Vis spectrophotometry. The method is based on the reduction of As to arsine (AsH₃) in acidic media by sodium tetrahydroborate (NaBH₄) followed by its subsequent reaction with silver diethyldithiocarbamate (AgDDC) to give an absorbing complex at 510 nm. The complexing reagent (AgDDC) has been dissolved in a 1:1 (by the volume ratio) mixture of chloroform/chlorobenzene microdroplet and exposed to the generated gaseous arsine via a reversed microfunnel in the headspace of the sample solution. Several operating parameters affecting the performance of the method have been examined and optimized. Acetonitrile solvent has been added to the working samples as a sensitivity enhancement agent. Under the optimized operating conditions, the detection limit has been measured to be 0.2 ng mL^?1 (based on 3s_b/m criterion, n _b?=?8), and the calibration curve was linear in the range of 0.5–12 ng mL^?1. The relative standard deviation for eight replicate measurements was 1.9 %. Also, the effects of several potential interferences have been studied. The accuracy of the method was validated through the analysis of JR-1 geological standard reference material. The method has been successfully applied for the determination of arsenic in raw and spiked soft drink and water samples with the recoveries that ranged from 91 to 106 %.     

Field application of SPME as a novel tool for occupational exposure assessment with inhalational anesthetics

Occupational exposure to inhalational anesthetics occurs routinely in operating rooms. It could induce serious health hazards and diseases. This exposure assessment is a crucial step in determining risks. In this study, a pen-shaped holder for solid-phase microextraction (SPME) sampler was successfully applied as a time-weighted average sampling tool for workshift exposure assessment of operation room staff to halothane. It proved to be very convenient for use in occupational environments such as operation rooms. Samples were analyzed by a gas chromatography-mass spectrometry. The validity of the SPME method was checked in real-world conditions with Occupational Safety and Health Administration (OSHA) 103 standard method for the determination of inhalational anesthetics. A good agreement between OSHA 103 and SPME methods was obtained and results demonstrated no statistically significant differences in anesthetic concentrations determined by the two analytical methods (p?≥?0.05). It is concluded that SPME in retracted mode could successfully be applied in occupational exposure assessment purposes.     

Effect of fishing vessels on trace metal contamination in sediments of three harbors along Iranian Oman Sea coast

In this study, the levels of natural and anthropogenic metal contamination (aluminum (Al), iron (Fe), manganese (Mn), arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), and zinc (Zn)) in surface sediments of three harbors along the Iranian coast of Gulf of Oman were examined and reported for the first time. Effect of grain size, mineralogy, normalization technique using Fe concentrations, and different sediment quality guidelines were discussed. Data from the harbors were compared with other harbors worldwide. Sediments inside the harbors are characterized by moderate and high levels of pollution by trace metals Cu (12–287 μg/g), Pb (11–1,780 μg/g), Zn (38–547 μg/g), Cr (70–2,370 μg/g), and Ni (31–116 μg/g). However, As and Cd did not show considerable pollution inside and outside the harbors. Considering that there is no industrial activity around the study harbors, the major sources of contamination in the harbors are repairing, fueling, greasing, and painting of fishing ships and boats. Mineralogy of sediments in the study area as well as trace metal concentration in reference samples taken from onshore geological units confirmed that natural inputs of Cd, Cu, Pb, and Zn in the harbors are very low while most of Ni and Cr contamination in the study area comes from erosion of ophiolitic mélange units at the North of Makran mountains.