Relationship between Pb and Cd accumulations in house crow,their habitat,and food content from Klang area,Peninsular Malaysia

Heavy metal pollution has become a global concern due to accumulation in tissue and transferable effects to humans via the food chain. This study focused on monitoring the accumulation of cadmium (Cd) and lead (Pb) in surface soil and body content: bone, heart, brain, liver, lung, muscle, kidney, feathers, feces, and gizzard contents of house crow Corvus splendens in the Klang region, Malaysia. The results revealed the occurrence of Pb and Cd in all biological samples from house crows, food contents, and surface soil samples. Heart and kidney accrued high amounts of Cd, while high amounts of Pb were found to accumulate in bones and feathers. Major discrepancies were also discovered in the concentrations of metals between juvenile and adults, as well as female and male bird samples. Concentrations of Pb and Cd in house crow internal tissues correlated significantly with that of bird feathers, but none could be established with that of surface soil. In addition, a significant correlation was observed between Pb concentration in the internal tissues to that of the feces, but the same was not the case when compared with the surface soil concentration. Metal accrual in the house crows feathers and feces may be through a long-term transmission via the food chain, which are eliminated from feathers via molting. This may suggest the utility of molted breast feathers of house crow in the bio-monitoring of Cd and Pb contamination, whereas feces of house crow appear only to be suitable for the bio-monitoring of Pb contamination.     

Behavior of As,Cd, Co,Cr, Cu,Pb, Ni,and Zn at the soil/plant interface around an uncontrolled landfill (Casablanca,Morocco)

The present work undertaken in the environmental context aims to study the distribution of heavy metals in plants that grow naturally around uncontrolled landfills. The study's goal was to identify plants that can be used to remediate contaminated soils. For this purpose, 14 plants species and their rhizospheric soil samples were collected and analyzed for arsenic, cadmium, cobalt, chromium, copper, lead, nickel, and zinc by inductively coupled plasma‐atomic emission spectrometry. The results showed the presence of elevated metal concentrations in soil, many exceeding the regulatory values, and that many species exhibited an ability to accumulate multiple metals in their shoots and roots without sustaining toxicity. This was confirmed by bioconcentration and translocation factors generally higher than 1.     

Recovery of Chromium(III) from Tannery Wastewater by Nanoparticles and Whiskers of Chitosan

Chitosan, its nanoparticles and whiskers present an excellent capacity to complex chromium ions. However, this phenomenon is influenced by different parameters. In our search, we determined the appropriate range of pH to form chitosan–Cr(III), nanoparticles Cr(III) and whiskers–Cr(III) complex. We studied also the influence of chromium concentration and nature of chitosan-based materials on complexation process. Our main aim is approximate the optimal conditions to remove chromium(III) from tanning bath, recuperated from tannery wastewater of Marrakech in Morocco. However, the results of adsorption kinetic in tannery wastewater revealed that chitosan, its nanoparticles, whiskers and biocomposites are good sorbent of chromium as well, even if the adsorbed quantity is less compared to chromium solution. Although, according to ICP-OES analysis in this real effluent, nanoparticles are the best complexing ligand, after 24 h of contact nanoparticles can remove 70% of chromium from this tannery wastewater.     

Phosphogypsum Waste Used as Reinforcing Fillers in Polypropylene Based Composites: Structural,Mechanical and Thermal Properties

The industrial production of wet phosphoric acid in Morocco led to controversial stockpiling of waste phosphogypsum by-products resulting in the release of significant amounts of toxic impurities in salt marshes. In the framework of fighting against global climate change and efforts to reduce toxic industrial wastes (phosphate industry), this work presents a new polymer composite based on phosphogypsum (PhG) and polypropylene (PP).The compounds were produced by twin-screw extrusion and injection molding. The morphological results show that good affinity between PhG and PP led to good particle dispersion/distribution in the polymer matrix. Thermal characterizations showed that PhG particles improved the thermal stability of PP with a 50 °C increase at 40 wt%. The optimum tensile modulus was also obtained at 40 wt% with a 74 % increase over neat PP. Dynamical mechanical analysis showed that PhG addition can improve the viscoelastic properties of PP for potential applications under dynamic stress. Overall, it can be concluded that PhG is potential reinforcing filler for the production of PP composites and represents a promising avenue for the valorization of this waste as a new raw material while resolving some environmental issues.     

Green examination: integration of technology for sustainability

The recent development of infrastructure all around the world has resulted in an increasing trend of online examination in universities. The paper is an approach in theory and practical aimed at analyzing the feasibility of sustainable examination in four universities and its environmental impact reducing the paper use terming it as green examination. The paper studied the integration of sustainability through the use of computers and technology in the examination of the universities viz. King Khalid University (KKU), Saudi Arabia, Integral University (IU), India, Aligarh Muslim University (AMU), India, and The Hague University (HU), The Netherlands. The study has analyzed the trend of paper requirement, paper utilized and paper wasted in all the four universities. The environmental impact resulting from reduced paper use has been also analyzed. The feasibility of e-examination, its implementation and the implications has been undertaken in the study. The study concludes that the e-examination can almost make the examinations paperless and feasible in the four universities.     

Bioaccumulation of organochlorine contaminants in fish species from Lake Qarun,a protected area of Egypt

The purpose of this study was to determine concentrations of organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in Nile tilapia (Oreochromis niloticus) and Bouri fish (Mugil cephalus) from Lake Qarun, a protected area of Egypt, and evaluate the relative ecological risk of these compounds. Different tissues of the fish species were analyzed for 26 chlorinated pesticides and 29 PCB congeners. Total concentrations (µg/kg wet weight, ww) of OCPs ranged between 1487 and 6217 (mean: 3260) and of PCBs between 9.0 and 61 (mean: 34). The trend of detected organochlorine pollutants was: endrin aldehyde > dieldrin > hexachlorobenzene > PCBs > endrin > 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethanes (DDTs). Heptachlor epoxide; oxy-, cis-, and trans-chlordane; trans-nonachlor; β-hexachlorocyclohexane; δ-hexachlorocyclohexane; and endosulfan I and endosulfan sulfate levels were below the detection limit. The ratios of (1,1-dichloro-2,2-bis(p-chlorophenyl)ethylenes [DDEs] + 1,1-dichloro-2,2-bis(p-chlorophenyl)ethanes [DDDs])/ΣDDTs in fish tissues indicated no recent DDT exposure. Concentrations of DDTs and PCBs were generally comparable or higher than those found in studies of similar species worldwide. The concentrations of hexachlorobenzene, dieldrin, and endrin aldehyde in fish muscles exceeded the maximum residue level recommended by various organizations.     

The depositional setting of the Late Quaternary sedimentary fill in southern Bannu basin,Northwest Himalayan fold and thrust belt,Pakistan

Geostatistical variogram and inversion techniques combined with modern visualization tools have made it possible to re-model one-dimensional electrical resistivity data into two-dimensional (2D) models of the near subsurface. The resultant models are capable of extending the original interpretation of the data to depict alluvium layers as individual lithological units within the 2D space. By tuning the variogram parameters used in this approach, it is then possible to visualize individual lithofacies and geomorphological features for these lithologic units. The study re-examines an electrical resistivity dataset collected as part of a groundwater study in an area of the Bannu basin in Pakistan. Additional lithological logs from boreholes throughout the area have been combined with the existing resistivity data for calibration. Tectonic activity during the Himalayan orogeny uplifted and generated significant faulting in the rocks resulting in the formation of a depression which subsequently has been filled with clay-silt and dirty sand facies typical of lacustrine and flood plain environments. Streams arising from adjacent mountains have reworked these facies which have been eroded and replaced by gravel-sand facies along channels. It is concluded that the sediments have been deposited as prograding fan shaped bodies, flood plain, and lacustrine deposits. Clay-silt facies mark the locations of paleo depressions or lake environments, which have changed position over time due to local tectonic activity and sedimentation. The Lakki plain alluvial system has thus formed as a result of local tectonic activity with fluvial erosion and deposition characterized by coarse sediments with high electrical resistivities near the mountain ranges and fine sediments with medium to low electrical resistivities towards the basin center.     

Quality assessment of various bottled waters marketed in Saudi Arabia

This study focuses on the chemical analysis of the available brands of domestic bottled water in Riyadh City, Saudi Arabia. The distribution of the chemical constituents (major, minor, and trace elements) is determined and compared with the chemical content labeled on the bottles and with drinking water standards of Saudi Arabian, World Health Organization, and U.S. Environmental Protection Agency. The obtained results indicated that except for fluoride and bromate, the concentrations of dissolved salts, soluble cations and anions, nitrate, and trace elements of most bottled waters on sale were within the permissible limits set by standards used. On the other hand, the comparison between determined and reported label values recorded a substantial variation in some parameter values. Results indicated that more than 18 % of the sampled bottled waters exceeded the allowable limits for drinking water. Generated Piper diagrams revealed that the majority of investigated waters were sodium chloride–sulfate type; however, the hydrochemical modeling indicated that all water samples were undersaturated for anhydrite, gypsum, and halite.     

Impact of storm water on groundwater quality below retention/detention basins

Groundwater from 33 monitoring of peripheral wells of Karachi, Pakistan were evaluated in terms of pre- and post-monsoon seasons to find out the impact of storm water infiltration, as storm water infiltration by retention basin receives urban runoff water from the nearby areas. This may increase the risk of groundwater contamination for heavy metals, where the soil is sandy and water table is shallow. Concentration of dissolved oxygen is significantly low in groundwater beneath detention basin during pre-monsoon season, which effected the concentration of zinc and iron. The models of trace metals shown in basin groundwater reflect the land use served by the basins, while it differed from background concentration as storm water releases high concentration of certain trace metals such as copper and cadmium. Recharge by storm water infiltration decreases the concentration and detection frequency of iron, lead, and zinc in background groundwater; however, the study does not point a considerable risk for groundwater contamination due to storm water infiltration.