Evaluation of metals in several varieties of sweet potatoes (Ipomoea batatas L.): comparative study

Sweet potatoes are a staple in the diet of some people and an excellent source of minerals. Metal monitoring in food, like sweet potatoes, provides basic information on safety aspects in regulatory processes as well as nutritional values. One hundred five samples of three varieties of sweet potatoes were randomly obtained from supermarkets, farmers markets, and farmers' plots in Tenerife (Canary Islands, Spain). The edible portion (pulp) was the only part considered for analysis. Flame atomic absorption spectrometry was used to determine the contents of sodium (Na), potassium (K), calcium (Ca), magnesium (Mg), copper (Cu), iron (Fe), manganese (Mn), and zinc (Zn), while the levels of chromium (Cr), nickel (Ni), cadmium (Cd), and lead (Pb) were determined using graphite furnace atomic absorption spectrometry. The mean concentrations were 500 Na, 4409 K, 564 Ca, 609 Mg, 1.291 Cu, 6.554 Fe, 2.324 Mn, 2.348 Zn, 0.028 Cr, 0.048 Ni, 0.001 Cd, and 0.003 Pb mg/kg, respectively. Potassium presented the highest contents in all varieties of sweet potatoes. Iron was the most abundant microelement. The orange fleshed sweet potato variety offered greater nutritional contributions to the recommended intakes than the rest of the varieties studied. The estimated mean daily intake of Ni (0.72 mg/day) detected in our samples was highly consistent with other studies. Average daily intakes of Cd (0.015 μg/day) and Pb (0.045 μg/day) were below toxicological reference values. In conclusion, the levels of Cd and Pb detected in the sweet potatoes analyzed do not represent any toxicological risk to consumers.     

A methodology to identify representative configurations of sensors for monitoring soil moisture

Soil moisture is the key link among hydroecological compartments, responding dynamically to sequences of atmospheric processes and management conditions and modulating physical, chemical, and biological processes in the soil. Currently, there are a variety of monitoring techniques to measure, directly or indirectly, the soil moisture. However, some practical issues remain open like the definition a priori of the number, location and depth of the monitoring points, and the impact of failing or poor performance soil moisture sensors. Here, we present a set of techniques, namely Δθ time series, wavelet filtering, and time stability, to identify representative points and monitoring depths through an analysis of hourly soil moisture time series for different configuration of the monitoring network. We used real data from a monitoring network consisting of seven monitoring points, each one with four EC-5 probes (Decagon Devices Inc., Pullman, WA) at 20, 40, 60, and 100?cm. The use of simple time series of Δθ allowed us to assess the spatiotemporal influence of the monitoring points, while the wavelet periodograms allowed us to get insight about the response of the monitoring points at different time scales. Both methods are easy to implement or adapt to specific conditions, being coherent to the results derived from time stability analysis. For our case study, we concluded that we could reallocate 16 sensors (out of 28) without a significant loss of information. However, the final decision strongly relies on a deep knowledge of the site features and the objectives of the monitoring network.     

Fractionation of heavy metals and assessment of contamination of the sediments of Lake Titicaca

Chemical weathering is one of the major geochemical processes that control the mobilization of heavy metals. The present study provides the first report on heavy metal fractionation in sediments (8–156 m) of Lake Titicaca (3,820 m a.s.l.), which is shared by the Republic of Peru and the Plurinational State of Bolivia. Both contents of total Cu, Fe, Ni, Co, Mn, Cd, Pb, and Zn and also the fractionation of these heavy metals associated with four different fractions have been determined following the BCR scheme. The principal component analysis suggests that Co, Ni, and Cd can be attributed to natural sources related to the mineralized geological formations. Moreover, the sources of Cu, Fe, and Mn are effluents and wastes generated from mining activities, while Pb and Zn also suggest that their common source is associated to mining activities. According to the Risk Assessment Code, there is a moderate to high risk related to Zn, Pb, Cd, Mn, Co, and Ni mobilization and/or remobilization from the bottom sediment to the water column. Furthermore, the Geoaccumulation Index and the Enrichment Factor reveal that Zn, Pb, and Cd are enriched in the sediments. The results suggest that the effluents from various traditional mining waste sites in both countries are the main source of heavy metal contamination in the sediments of Lake Titicaca.     

Assessing reliable indicators to sewage pollution in coastal soft-bottom communities

Physicochemical characteristics of sediment and benthic communities were studied in the proximity of seven sewage outfalls with differences in flow and wastewater treatment in the Western Mediterranean Sea. Redox potential was the only abiotic parameter which showed a pattern related with distance to outfalls, whereas granulometry, percentage of organic matter, metal concentrations or pH did not show changes related with outfall presence. Benthic community analysis proved to be the most suitable monitoring tool. The results showed that the highest impacted stations corresponded with those closest to outfall with the highest flow and only pre-treatment, whilst a decrease of this tendency was detected in the locations where secondary treatment takes place. Meta-analysis showed a decrease of amphipods and tanaids abundance as well as redox potential, as the indicators with the clearest response to sewage presence.     

Reducing external costs of nitrogen pollution by relocation of pig production between regions in the European Union

This paper tests the hypothesis that relocation of pig production within the EU27 can reduce the external costs of nitrogen (N) pollution. The external cost of pollution by ammonia and nitrate from agriculture in the European Union (EU27) in 2008 was estimated at 61–215 billion € (0.5 to 1.8% of the GDP). Per capita it ranged from more than 1000 € in north-west EU27 to 50 € in Romania. The average contribution of pig production was 15%. Using provincial data (224 NUTS2 regions in EU27), the potential reduction of external N cost by relocation of pig production was estimated at 14 billion € (10% of the total). Regions most eligible for decreasing the pig stock were in western Germany, Flemish region, Denmark, the Netherlands and Bretagne, while Romania is most eligible for increasing pig production. Relocating 20 million pigs (13% of the total EU stock) decreased average external costs per capita from 900 to 785 € in the 13 NUTS2 regions where pigs were removed and increased from 69 to 107 € in 11 regions receiving pigs. A second alternative configuration of pig production was targeted at reducing exceedance of critical N deposition and closing regional nutrient cycles. This configuration relocates pigs within Germany and France, for example from Bretagne to Northern France and from Weser-Ems to Oberbayern. However, total external cost increases due to an increase of health impacts, unless when combined with implementation of best N management practices. Relocation of the pig industry in the EU27 will meet many socio-economic barriers and realisation requires new policy incentives.     

Evaluation of the sensitivity spectrum of a video tracking system with zebrafish (<Emphasis Type="Italic">Danio rerio</Emphasis>) exposed to five different toxicants

The aim of this study was to develop a biological early warning system for the detection of aquatic toxicity and test it with five toxicants with distinct chemical nature. This was done in order to verify the spectrum of sensitivities of the proposed system, as well as the potential identification capability of the tested contaminants, using only the analysis of zebrafish’s behavior. Six experimental conditions were tested: negative control and five toxicants (bleach, lindane, tributyltin, mercury, and formaldehyde). The exposure time was 45 min, and the concentrations used corresponded to 9% of LC₅₀’s-96 h for the tested compounds, to ensure ecologically relevant results. A total of 108 fish were used, with each individual experimental condition being tested 18 times. A statistical model of diagnosis was used, combining self-organizing map and correspondence analysis. The values of sensitivity, specificity, accuracy, false positive, false negative, positive predictive value (PPV), and negative predictive value (NPV) were calculated. The objectives of the work were accomplished and the system showed a good overall diagnostic performance with 79% in accuracy, 77% in sensitivity, and 88% in specificity. The lowest result of the predictive values was 78% (lindane and mercury), in the case of the NPV, and 86% (bleach and lindane), in the case of the PPV. The best result of the predictive values was 100% (bleach and tributyltin), for the NPV, and 89% (tributyltin), for the PPV. Regarding the five tested toxicants, the system was able to correctly identify the agent responsible for the contamination in 40% of the positive diagnoses.     

Dental enamel as biomarker for environmental contaminants in relevant industrialized estuary areas in São Paulo,Brazil

Heavy metal contamination is a long-standing and very well-known public health problem, and its exposure can cause damage to several organs of human body, especially on the central nervous system of young children and teenagers. The aim of this article is to evaluate lead, cadmium, and manganese contamination in 125 children from 6 to 13 years old living in contaminated areas during the period from 2006 to 2009 (São Vicente, Cubatão Downtown, Bertioga and Cubatão Pilões/Água Fria). This estuary area is the most important example of environmental degradation by chemicals from industrial sources. This is a cross-sectional study through clinical examinations and dental enamel tests. All mothers from these children lived in the area since before the pregnancy. Lead, cadmium, and manganese levels (μg/g) were measured on dental enamel samples through graphite furnace atomic absorption spectrometry, searching for the occurrence of heavy metals. The mean lead concentrations were 139.48 μg/g in Cubatão Pilões/Água Fria, 170.45 μg/g in Cubatão Downtown, 213.52 μg/g in São Vicente, and 151.89 μg/g in Bertioga. The mean cadmium concentrations were 10.83 μg/g in Cubatão Pilões/Água Fria, 12.58 μg/g in Cubatão Downtown, 10.92 μg/g in São Vicente, and 14.57 μg/g in Bertioga. The mean manganese concentrations were 23.49 μg/g in Cubatão Pilões/Água Fria, 30.90 μg/g in Cubatão Downtown, 41.46 μg/g in São Vicente, and 42.00 μg/g in Bertioga. Dental surface enamel may be used as an efficient biomarker of past environmental exposure to lead, manganese, and cadmium which are associated to well-known sources of heavy metal contamination. The results suggest that the evaluated children were exposed to sources of lead, cadmium, and manganese since before their conceptions. Although Bertioga initially was chosen as a control area of this study, it was also was verified to have heavy metal contamination on examined children.     

On the influence of environmental factors on harvest: the French Guiana shrimp fishery paradox

Environmental Economics and Policy Studies - The purpose of this paper is to investigate the environmental nature of the French Guiana shrimp fishery dynamics through an empirical analysis. To do...     

Copper distribution in surface and subsurface soil horizons

The horizons of four natural soils were treated with Cu²⁺ in an acid medium to study the retention capacity of Cu. The possible mineralogical changes arising because of the treatment were also studied. The soil properties and characteristics with the greatest influence on the metal retention and its distribution among the different soil fractions were determined. Crystalline phases of each horizon were determined by X-ray diffraction (XDR). The morphology, structural distribution and particle chemical composition of soil samples were investigated using field emission scanning electron microscopy. Cu distribution in the different geochemical phases of the soil was studied using a sequential extraction. The treatment led to an increase in the amorphous phases and the formation of new crystalline phases, such as rouaite (Cu₂(NO₃)(OH)₃) and nitratine (NaNO₃). Cu was also found superficially sorbed on amorphous hydroxy compounds of Fe that interact with albite, muscovite and gibbsite, and also on spherical and curved particles of aluminium clays. The largest amount of Cu retained was in an exchangeable form, and the smallest amount associated with the crystalline Fe oxides and residual fraction. In the surface horizons, the predominant Cu retention process is complexation in organomineral associations, while in the subsurface horizons it is adsorption.     

Assessment of Aquifer Vulnerability in an Agricultural Area in Spain Using the DRASTIC Model

The assessment of aquifer vulnerability is a very important task, especially in agricultural areas because the quality and availability of groundwater affects both the sustainability of agriculture and the quality of life. In this study, an integrated approach is considered, with the use of the generic and agricultural DRASTIC models as well as a geographic information system (GIS), to assess groundwater vulnerability in the agricultural area of Barrax, in the province of Albacete, in Spain. Seven parameters—depth to water, net recharge, aquifer media, soil media, topography, impact of vadose zone media, and hydraulic conductivity of the aquifer (DRASTIC)—have been considered as weighted layers to enable an accurate groundwater risk mapping. The results of the generic DRASTIC model indicated very low vulnerability to contamination for Barrax groundwater due to limited urban and industrial development in the wider area. However, agricultural activities impose pressure to groundwater resources and the results of the agricultural DRASTIC model show that 6.86% of the study area is characterized by very high, 2.29% by high, 47.28% by medium, 38.28% by low, and the remaining 5.29% by no vulnerability to groundwater contamination. The distribution of nitrate concentration in groundwater in the area under study is quite well correlated with the agricultural DRASTIC vulnerability index. Sensitivity analysis was also performed to acknowledge statistical uncertainty in the estimation of each parameter used, to assess its impact, and thus to identify the most critical parameters that require further investigation. Depth to water and impact of vadose zone are the parameters that had the most noticeable impact on the generic DRASTIC vulnerability index followed by the soil media and topography. In contrast, the agricultural DRASTIC method is more sensitive to the removal of the depth to water parameter followed by the topography and the soil media parameters.