Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Application of tracer ratio and inverse dispersion methods with boat-based plume measurements to estimate ammonia emissions from seabird colonies

Ammonia emissions from two contrasting seabird colonies in Scotland were measured, based on the determination of atmospheric concentrations downwind of the colonies. Atmospheric concentrations of ammonia (NH₃) across the downwind plume were compared with the inverse application of a Gaussian dispersion model (ID) to calculate the modelled NH₃ emission that would generate the measured cross-wind-integrated plume concentration. In parallel, a tracer gas (sulphur hexafluoride, SF₆) was released from the colonies with air samples taken to allow determination of SF₆ concentrations. On the basis of the known emission rate of SF₆, the magnitude of ammonia emissions was estimated by the cross-wind-integrated tracer ratio (TR) of NH₃/SF₆ concentrations. Coupled with data on annual bird attendance, the measurements indicate annual emissions from the Isle of May and the Bass Rock of 18 and 132 tonnes NH₃-N year^–1, respectively. The measured NH₃ emissions were compared with estimates of seabird nitrogen excretion to estimate the proportion of excreted N that is volatilised as NH₃ (F_Nr). The emission estimates of the two methods compared favourably, giving 4 and 6 kg NH₃-N h^–1 (F_Nr = 15%) for the Isle of May for the ID and TR methods, respectively, and 21 and 25 kg NH₃-N h^–1 (F_Nr = 50%) for the Bass Rock for the ID and TR methods, respectively. The results provide the first measurement-based estimates to allow regional up scaling of ammonia emissions from seabirds.     

Modelling nitrogen fluxes at the landscape scale

The distribution and impacts of different nitrogen pollutants are inextricably linked. To understand the problem fully, the interactions between the different pollutants need to be taken into account. This is particularly important when it comes to abatement techniques, since measures to reduce emissions of one nitrogen pollutant can often lead to an increase in another. This project represents a step towards greater understanding of these issues by linking together new and existing nitrogen flux models into a larger framework. The modelling framework has been constructed and some of the nitrogen flows between fields, farms and the atmosphere have been modelled for a UK study area for typical farm management scenarios.     

Nitrous Oxide in Agricultural Drainage Waters Following Field Fertilisation

Dissolved nitrous oxide (N₂O), nitrate (NO₃ ^-), and ammonium (NH₄ ⁺) concentrations in an agricultural field drain were intensively measured over the period of field nitrogen (N) fertilisation and for several weeks thereafter. Supersaturations of dissolved N₂O were observed in field drain waters throughout the study. On entry to an open drainage ditch, concentrations of dissolved N₂O rapidly decreased and a total N₂O-N emission via this pathway of 13.2 g over the period of study (45 days) was calculated. This compared with a predicted emission of the order of 300 g, based on measured losses of NO₃ ^- and NH₄ ⁺ in the field drainage water, and the default IPCC emission factor of 0.01 kg N₂O-N per kg Nentering rivers and estuaries. In contrast to widespread evidence of a clear relationship between the amount of N applied to agricultural land and subsequent direct N₂O emission from the soil surface, the relationship between the amount of N₂O in soil drainage waters and the amount of N applied was poor. We conclude that the complexity, both spatially and temporally, of the processes ultimately responsible for the amount of N₂O in agricultural drainage waters make a straightforward relationship between N₂O concentration and N application rate unlikely in all but the simplest of systems.     

Measurements of PCB Fluxes into the Atmosphere from a Site Receiving Stabilized Dredged Material

A 50 ha known contaminated site in Bayonne, New Jersey, U.S.A. is permitted to receive up to 3 × 10⁶ m³ of sediment dredged from navigation channels in the New York/New Jersey Harbor. Much of the sediment is expected to contain low to moderate concentrations of industrial and agricultural chemicals, including Polychlorinated Biphenyls (PCBs). The dredged material brought to the site is stabilized with cement and then placed as a capping and grading layer. The flux of PCBs from drying stabilized dredged material has been estimated from measurements of PCB air concentrations at two heights above the ground along with micrometeorological observations. A statistically significant gradient in PCB concentrations has been consistently measured in the first 3 m above the ground. Observed PCB fluxes were highest over freshly placed stabilized dredged sediment and decreased as it cured. The highest flux observed in this study was 7214 ng/m²/h, but during subsequent sampling intervals at the same site, the flux estimates decreased by an order of magnitude over a 5-day interval.     

The Chemical Recycling of PET in the Framework of Sustainable Development

In this investigation, all the techniques used in the chemical recycling of polyethylene terephthalate (PET) are critically reviewed according to the overall benefits together with the environmental surcharge that they cause. Those, which are consistent with the principles of sustainable development, are indicated. Experimental data are presented for the acid hydrolysis of PET and compared with previous results on the alkaline hydrolysis of PET with, or without, the use of a phase transfer catalyst. Overall material balances are carried out for the hydrolysis of PET. Finally, it can be postulated that recycling according to the scheme: is the only one within the framework of sustainable development. Therefore, the recycling of PET does not only serve as a partial solution to the solid waste problem but also contributes to the conservation of raw petrochemical products and energy.     

Application of the operating window concept to remediation‐option selection

An Erratum has been published for this article in Remediation 14(4) 2004, 141. The selection of remediation options for the management of unacceptable risks at contaminated sites is hindered by insufficient information on their performance under different site conditions. Therefore, there is a need to define “operating windows” for individual remediation options to summarize their performance under a variety of site conditions. The concept of the “operating window” has been applied as both a performance optimization tool and decision support tool in a number of different industries. Remediation‐option operating windows could be used as decision support tools during the “options appraisal” stage of the Model Procedures (CLR 11), proposed by the Environment Agency (EA) for England and Wales, to enhance the identification of “feasible remediation options” for “relevant pollutant linkages.” The development of remediation‐option operating windows involves: 1) the determination of relationships between site conditions (“critical variables”) and option performance parameters (e.g., contaminant degradation or removal rates) and 2) the identification of upper‐ and lower‐limit values (“operational limits”) for these variables that define the ranges of site conditions over which option performance is likely to be sufficient (the “operating window”) and insufficient (the “operating wall”) for managing risk. Some research has used case study data to determine relationships between critical variables and subsurface natural attenuation (NA) process rates. Despite the various challenges associated with the approach, these studies suggest that available case study data can be used to develop operating windows for monitored natural attenuation (MNA) and, indeed, other remediation options. It is envisaged that the development of remediation‐option operating windows will encourage the application of more innovative remediation options as opposed to excavation and disposal to landfill and/or on‐site containment, which remain the most commonly employed options in many countries. © 2004 Wiley Periodicals, Inc.     

Gender in the boss–subordinate relationship: a Nigerian study

The present study examines the interaction effect of gender of both subordinates and supervisors on subordinates' perception of differentiation of boss–subordinate relationship in an African setting. Data was collected from a total of 60 boss–subordinate dyads in four‐sex combinations obtained through a survey of a large five‐star hotel in Abuja, Nigeria. Results revealed that subordinates in opposite‐sex dyads perceived better quality of exchange than those in same‐sex dyads. The strongest quality of exchange was perceived in male boss–female subordinate dyad, while the weakest was perceived in female boss–female subordinate dyad. This emphasizes the importance of gender in the differentiation of boss–subordinate relationships in an African setting. Copyright © 2004 John Wiley & Sons, Ltd.     

Evidence of integration of air quality management in the decision-making processes and procedures of English local government

The air quality management (AQM) framework in the UK is a risk management approach using effects-based objectives for air pollutants to determine the need for action. The Environment Act 1995 required a National Air Quality Strategy to be published, setting out health-based standards and objectives for eight pollutants, of which seven are to managed at a local scale. Because of the variety of sources of air pollution, if the AQM process is to succeed in the long term, solutions to identified problems will be required from transport, land use and economic planning sectors of local government in liaison with various other agencies, regulators and outside bodies. As such the task is inherently multi-disciplinary and an integrated, collaborative approach will be necessary. Although this observation is now fairly well documented, there is still little guidance relating to how, in relation to air quality management, integration can actually be accomplished. This paper presents some observations from case studies undertaken as part of a longer-term research study and in particular focuses on the identified problems of involving non-air-quality professionals in a highly technical scientific process. Various approaches to the collaborative aspects of air quality management will be presented. These case studies represent local authorities of different sizes in different political and organisational situations facing a range of air quality challenges. The creation of project teams or task forces is judged particularly useful for local air quality management. Methods that could be applied more widely include appointing individuals as integrators, and rotation of key personnel.