Tunnel study of on-road vehicle emissions and the photochemical potential in Taiwan

Motor vehicle emission factors of carbon monoxide (CO) and non-methane volatile organic compounds (NMVOCs) were calculated inside the Chung-Cheng Tunnel of Kaohsiung in Taiwan. The results were compared with those model predictions from the Mobile Taiwan 2.0 model. Individual concentrations of 21 species of NMVOCs were also determined. Photochemical potential of NMVOCs was evaluated by using the maximum incremental reactivity (MIR). Field data showed that the integrated emission factors of CO and NMVOCs for actual fleet were 6.3 and 1.5 g/veh km, respectively. The error range of these factors may be up to 45%. The predicted values by the Mobile Taiwan 2.0 model closely matched the observed data. Concentrations of isopentane, 2-methylpentane, toluene and m,p-xylene were the dominant species of NMVOCs. The ratio of maximum incremental reactivity to NMVOCs concentration was 3.9, similar to those of the studies in the US Fort McHenry and Tuscarora Tunnel.     

The reuse of biosludge as an adsorbent from a petrochemical wastewater treatment plant

Biosludge was obtained from a petrochemical industry's biological wastewater treatment plant. Zinc chloride (ZnCl2) was used as a sludge activation agent during the pyrolytic process. Scanning electron microscope (SEM) image photographs, element composition, surface functional group, and pore structure were analyzed for the sludge adsorbent characteristics. Results indicated the proper ZnCl2-immersed concentration, pyrolytic temperature, and time could produce adsorbent from the biosludge. The optimal conditions for a larger surface area adsorbent were 3 M ZnCl2-immersed sludge pyrolyzed at 600 degrees C for 30 min and washed with 3 N hydrochloric acid (HCl) solution and distilled water. The predominant pore size of the sludge adsorbent was the mesopore.     

Effect of metal ions on decomposition of chlorinated organic substances by ozonation in acetic acid

The objective of this study is to find metal ions that enhance the ozone decomposition of chlorinated organic substances in acetic acid. Although the pseudo-first order degradation rate constant for 2,4-DCP by ozone in acetic acid in addition of Ca2+, Mg2+, Al3+ and Fe2+ were almost the same as that with no metal ion, the degradation rate in addition of Mn2+ and Fe3+ were 2.4 and 4.5 times as high as that with no metal ion, respectively. The presence of Fe3+ enhanced the degradation of 2,4-DCP by ozone in acetic acid because Fe3+-phenolate complex which have high reactivity with ozone was produced by the reaction between 2,4-DCP and Fe3+ in acetic acid.     

Statistical determination of the optimal sample size of secondary effluent BOD5 and SS

A statistical technique is presented for determining the optimal sample size required to estimate the true geometric mean with an allowable error at a desired level of confidence. Attention is focused on its application in the monitoring of secondary effluent BOD₅ and SS. It is concluded that continuous monitoring of effluent BOD₅ or SS throughout the year may generate much more data than are required for practical purposes. This statistical method may be used by operators or regulatory agencies to formulate cost-effective monitoring schemes. Records of the sample size data of secondary effluent BOD₅ and SS across Canada are also discussed.     

Pilot on-site tests to evaluate the permeability of infiltration gutters.

This study assessed the performance and developed a simple approach for estimating infiltration capacity of two infiltration gutters by using on-site tests. Permeable-brick and redbrick infiltration gutters were constructed on-site. Water infiltrated from the surfaces of two vertical sides (NFS-2S), bottom (NFS-B), and three faces (NFS-3S) of two gutters were measured under nonflowing and steady-state conditions. Tests results from NFS-2S and NFS-3S indicate that the permeability and water depth for both gutters are linearly dependent on each other. Experimental results also indicate that, when the bottom of the gutter is clogged, the permeable-brick gutter still retains approximately 93 and 79% for redbrick gutter of their infiltration capacity for NFS-3S. On the whole, permeable-brick gutter has an advantage over redbrick gutter in stormwater infiltration. Based on these results, the permeability for different water depths and widths of these two gutters can be obtained.     

Characterization of chemical species in atmospheric aerosols in a metropolitan basin

Ambient PM10 aerosol samples were collected from Taiwan's Taichung metropolitan basin between October 1997 and January 1998, and their chemical characteristics studied. The average mass concentration of PM10 was 109.0 +/- 54.1 microg/m3. Carbonaceous materials, sulfate, nitrate, and ammonium were the most important contributors to the PM10 component. On average, 64% of the PM10 was made up of fine particles. During PM10 episodes, average wind speed was 0.7 m/s and relative humidity was high, 83% on average, probably giving rise to stagnation of air pollutants and their entrapment close to the surface. With relative humidity < 70%, NO3-, NH4+, SO4(2-), carbonaceous materials, and PM10 mass showed high correlation with maximum hourly average ozone (O3M). Variation in atmospheric humidity may affect the gas-to-particle interactions of S and N species. The most significant contribution to PM10 in the Taichung urban basin was from the photochemical formation of secondary aerosols and carbonaceous materials in the atmospheric environment.     

Tissue distribution of absorbed humic acids

Distribution of humic acids (HA) in rats was studied using radioiodinated HA injected intraperitoneally. Distribution of ¹²⁵I was also studied for comparison. The distribution pattern of HA differed greatly from that of ¹²⁵I. Except in the thyroid and skin, ¹²⁵I was excreted from the body within 24 hours, whereas a large proportion of HA remained in the liver, kidney, skin, thyroid, bone and muscle. The difference in the distribution pattern and organ/serum radioactivity ratio suggests different kinetics for ¹²⁵I and ¹²⁵I-HA. The distribution pattern of HA correlated very well with the increased prevalences of organ diseases in the blackfoot disease endemic area, as reflected in epidemiologic studies. It is hypothesised that HA-metal complexes are possible etiological factors of diseases such as goitre, hepatoma, bladder cancer, vascular disease and diabetes mellitus, and that free radicals are the common causative factor.     

VOC concentration characteristics in Southern Taiwan

The field investigations were conducted at four air quality monitoring sites in Southern Taiwan during northeasterly prevailing monsoon to collect 160 data sets on volatile organic compounds (VOCs) to evaluate the ozone formation potential (OFP) of the air mass. The gas chromatograph and high performance liquid chromatography analyzed 58 VOCs and two aldehydes, respectively. Among the four sampling sites, the order of the five VOC classes based on the reactivity approach was different from the concentration-based method. Alkenes as well as aromatics provided a major contribution for the OFP. The relative ranking of the species at the four sites were quite dissimilar. Toluene was the most in abundance at each site. The most abundant species at the windward and leeward sites was different. The reactivity of the air mass at the leeward sites showed a similar pattern and had higher reactivity than the windward sites. Comparisons of the two ratios, xylene/benzene and toluene/benzene were used to assess the relative age of the air parcels and provide evidence of transport.     

VELOCITY AND CONCENTRATION DISTRIBUTIONS OF SEDIMENT‐LADEN OPEN CHANNEL FLOW1

ABSTRACT: A mathematical model to predict both velocity and concentration distributions for sediment‐laden open channel flow is developed. Velocity profiles are derived by theoretical analysis and numerical method. Logarithmic law and semi‐empirical wake function concept are not adopted. An empirical equation for the ratio of sediment exchange and fluid diffusion coefficients is considered to solve the diffusion equation for suspended‐sediment concentration profiles. Four sets of experimental data from previous researchers are compared to numerical calculation. In the engineering applications, velocity and concentration profiles of sediment‐laden flow can be predicted simultaneously by the present model with the measured velocity and sediment‐concentration at reference level.