Anoxic-aerobic treatment of the liquid fraction of cattle manure

Cattle manure from a dairy farm was treated in order to reduce its pollution potential. The manure came from a farm with 120 cows kept in stables in a free stall barn. As pretreatment, the manure is usually filtered on the farm using a screw press separator with a 0.5 mm mesh. Approximately 70% of the total filtered volume passes through the screen, thus constituting the liquid fraction. This fraction, with a composition of around 64,500 mg COD/l, 5770 mg total-N/l and 800 mg total-P/l, was subjected to centrifugation followed by a two-step biological treatment (anoxic-aerobic) to reduce organic matter (COD), nitrogen and phosphorus compounds. Centrifugation led to the following removal efficiencies: 35% total solids, 60% COD, 75% total phosphorus and 20% total nitrogen (mainly organic nitrogen). With the subsequent anoxic-aerobic treatment, average removal efficiencies of 85% for COD, 90% for total phosphorus and 75% for total nitrogen were achieved.     

Bench-scale composting of source-separated human faeces for sanitation

In urine-diverting toilets, urine and faeces are collected separately so that nutrient content can be recycled unmixed. Faeces should be sanitized before use in agriculture fields due to the presence of possible enteric pathogens. Composting of human faeces with food waste was evaluated as a possible method for this treatment. Temperatures were monitored in three 78-L wooden compost reactors fed with faeces-to-food waste substrates (F:FW) in wet weight ratios of 1:0, 3:1 and 1:1, which were observed for approximately 20 days. To achieve temperatures higher than 15 degrees C above ambient, insulation was required for the reactors. Use of 25-mm thick styrofoam insulation around the entire exterior of the compost reactors and turning of the compost twice a week resulted in sanitizing temperatures (>or=50 degrees C) to be maintained for 8 days in the F:FW=1:1 compost and for 4 days in the F:FW=3:1 compost. In these composts, a reduction of >3 log(10) for E. coli and >4 log(10) for Enterococcus spp. was achieved. The F:FW=1:0 compost, which did not maintain >or=50 degrees C for a sufficiently long period, was not sanitized, as the counts of E. coli and Enterococcus spp. increased between days 11 and 15. This research provides useful information on the design and operation of family-size compost units for the treatment of source-separated faeces and starchy food residues, most likely available amongst the less affluent rural/urban society in Uganda.     

The Effect of Masterbatch Addition on the Mechanical, Thermal, Optical and Surface Properties of Poly(lactic acid)

There has been considerable interest in the use of the biodegradable polymer poly(lactic acid) (PLA) as a replacement for petroleum derived polymers due to ease of processability and its high mechanical strength. Other material properties have however limited its wider application. These include its brittle properties, low impact strength and yellow tint. In an attempt to overcome these drawbacks, PLA was blended with four commercially available additives, commonly known as masterbatches. The effect of the addition of 1.5 wt% of the four masterbatches on the mechanical, thermal, optical and surface properties of the polymer was evaluated. All four masterbatches had a slight negative effect on the tensile strength of PLA (3–5% reduction). There was a four fold increase in impact resistance however with the addition of one of the masterbatches. Differential scanning calorimetry demonstrated that this increase corresponded to a decrease in the polymer crystallinity. However there was an associated increase in polymer haze with the addition of this masterbatch. The clarity of PLA was improved through the addition of an optical brightener masterbatch, but the impact resistance remained low. The glass transition and melting temperatures of PLA were not affected by the addition of the masterbatches, and no change was observed in surface energy. Some delay in PLA degradation, in a PBS degradation medium at 50 °C, was observed due to blending with these masterbatches.     

Daily performance at work: feeling recovered in the morning as a predictor of day‐level job performance

This study examined the state of being recovered in the morning (i.e., feeling physically and mentally refreshed) as a predictor of daily job performance and daily compensatory effort at work. Ninety‐nine employees from public service organizations completed a general survey and two daily surveys on pocket computers over the course of one workweek. Hierarchical linear modeling showed that being recovered in the morning was positively related to daily task performance, personal initiative, and organizational citizenship behavior and negatively related to daily compensatory effort at work. Relationships between the state of being recovered and day‐specific job performance were moderated by job control. For persons with a high level of job control, the relationship between being recovered and daily performance was stronger. Copyright © 2008 John Wiley & Sons, Ltd.     

Injury and loss concentration by sinkings in fishing fleets

Sinkings of fishing vessels, when accompanied by human loss, are accidents which lead to a great social upheaval, especially in the local area where they occur. In order to avoid or reduce these accidents, national governments must include in their legislation for this sector the appropriate safety measures. These resources and their distribution must be assigned in accordance with the needs of the accidentality, this requiring a detailed knowledge of the concentration of accidentality of a country’s fishing sector. In this context, the aim of the present work is twofold: first, to formulate a methodology for the fishing sector of a country, allowing the inequalities in the concentration of sinking accidents to be analysed; and second, to apply this methodology to the Spanish fishing fleet. Thus, two indices are constructed per region and type of fishing, for two variables: fishermen and vessels. Results are obtained both for the concentration of accidents and the associated Lorenz curves. An increase in the inequality in the spatial and functional distribution of these accidents is verified.     

Collective work and resilience of complex systems

This article aims to describe the characteristics of collective working situations in complex systems – especially those in nuclear power plants – related to common forms of cooperation, in order to improve systems resilience. In addition, we will try to detail some aspects of collective working situations, emphasizing the differences between various forms of control. The similarities between work activities (multi-addressed messages, linkage to regulation, central and peripheral information) are nonetheless exposed. We conclude by proposing a contribution to support systems design, thus facilitating cooperation in teamwork activities.     

Mathematical Modeling of Column and Field Dense Nonaqueous Phase Liquid Tracer Tests

Mathematical models for the simulation of dense nonaqueous phase liquid tracer tests (DTTs) in laboratory columns and in the field are developed and examined. The DTT technique is a means of estimating the quantity of dense nonaqueous phase liquid (DNAPL) in a domain of interest in an aquifer. The two-dimensional field DTT model uses the Method of Principal Directions and an asymmetrical upwind algorithm for describing advective transport. Both models include diffusion transport of tracer into and from low-permeability porous structures such as clay lenses, as well as the mass transport kinetics of partitioning tracer to and from the DNAPL droplets. The dependence of the effluent tracer concentration curves on the parameters of the models is explored, and conclusions are drawn regarding the applicability of, and several possible problems with, the DTT technique. Model results indicate that the DTT performs well at locating distributed droplets of DNAPL, but is unlikely to be useful in the assessment of pooled DNAPL.     

Evaluation of Caging Designs and a Fingernail Clam for Use in an In Situ Bioassay

Two cage designs and fingernail clams(Sphaerium fabale) were evaluated for theirsuitability for use in in situ bioassays toassess the ecological condition of a stream andpredict ecological recovery potential. One design(referred to as tray design) was a modified plastictray about one-fourth full of small gravels andcovered with 1 mm fiberglass mesh. The second design(referred to as tube-plates) consisted of shortplexiglass tubes about one-third full of small gravelsand attached horizontally to a plexiglass plate. Oneend of each tube faced into the current; both endswere covered with mesh. Cages containing clams weredeployed at reference and impacted (test) sites forperiods of 70 to 135 d. Growth and survival were theprimary endpoints evaluated, but the tube-platesallowed isolation of individual clams so that natalityalso could be evaluated as an endpoint. Results ofbenthic macroinvertebrate surveys, performed foranother study, were included to help validate bioassayresults. Both cage designs yielded good quantitative,site-specific results for clam survival and growth;results for natality, though, were less conclusive. Clam survival and growth results were in good generalagreement with the results for the benthicmacroinvertebrate community surveys. At a site wherethe macroinvertebrate community was the mostdepauperate, clam mortality was always rapid. At asite where the condition of the macroinvertebratecommunity was only slightly less impacted than themost impacted site, clam growth was almost alwayssignificantly lower than at reference sites. Survivalof clams was significantly reduced in <25 d at thissite in some trials, but in other trials there waslittle mortality. At a minimally impacted site, clamsurvival was similar to that found at reference sites,and differences in clam growth were not detectableuntil after 40 to 50 d of exposure. The tube-platedesign was easier to use, allowed more flexibility inselection of response parameters, and required lesshandling time of test animals, thus, this was thepreferred design. Our results demonstrated thateither in situ bioassay design can be used toaugment monitoring and assessment programs. Their useas a predictor of ecological recovery, however,requires further evaluation.     

Adaptation Scenarios of Agriculture in Poland to Future Climate Changes

This paper demonstrates the ability of Polish agriculture to adapt to predicted climate change according to GISS and GFDL scenarios. Both climate-change scenarios will significantly affect farming conditions in Poland through water deficit, shifts in planting and harvesting seasons, changes in crop yields and crop structure. Neither scenario seems to endanger the self-sufficiency of Poland as long as preventative measures are taken. Moreover, the realization of GISS creates the possibility of a surplus in production. It must be emphasized that regardless of the scenario, the adaptation of agriculture to an expected climate change cannot be handled by the farming community itself.     

Restored Riparian Buffers as Tools for Ecosystem Restoration in the MAIA; Processes, Endpoints, and Measures of Success for Water, Soil, Flora, and Fauna

Riparian buffer restorations are used as management tools to produce favorable water quality impacts, moreover among the many benefits riparian buffers may provide, their application as instruments for water quality restoration rests on a relatively firm foundation of research. However, the extent to which buffers can restore riparian ecosystems; their functionality and species composition, are essentially unknown. In light of the foregoing, two broad areas of research are indicated. First, data are needed to document the relative effectiveness of riparian buffers that differ according to width, length, and plant species composition. These questions, of managing buffer dimension and species composition for functionality, are of central importance even when attenuation of nutrient and sediment loads alone are considered. Second, where ecosystem restoration is the goal, effects to in-stream and terrestrial riparian biota need to be considered. Relatedly, the effects of the restoration on the landscape need to be considered. Particularly, at what rate do the effects of the riparian buffer on in-stream water quality, biota, and habitat diminish downstream from restored sites? Answers to these important questions are needed, for streams and watersheds of different size and for areas of differing soil type within watersheds. U.S. EPA-NRMRL has initiated as research project that will document the potential for buffers to restore riparian ecosystems; focusing on water quality effects, but also, importantly, documenting effects on biota. While substantial riparian buffer management initiatives are already underway, the extent of landscapes that influence riparian ecosystems in the eastern United States is large; leaving ample opportunity for this suggested research to provide improved buffer designs in the future. The ultimate goal of research projects developed under this paradigm of ecosystem restoration is to develop data that are needed to implement riparian buffer restorations in the mid-Atlantic and elsewhere, especially the eastern United States.