The effect of protected areas on forest disturbance in the Carpathian Mountains 1985–2010

Protected areas are a cornerstone for forest protection, but they are not always effective during times of socioeconomic and institutional crises. The Carpathian Mountains in Eastern Europe are an ecologically outstanding region, with widespread seminatural and old‐growth forest. Since 1990, Carpathian countries (Czech Republic, Hungary, Poland, Romania, Slovakia, and Ukraine) have experienced economic hardship and institutional changes, including the breakdown of socialism, European Union accession, and a rapid expansion of protected areas. The question is how protected‐area effectiveness has varied during these times across the Carpathians given these changes. We analyzed a satellite‐based data set of forest disturbance (i.e., forest loss due to harvesting or natural disturbances) from 1985 to 2010 and used matching statistics and a fixed‐effects estimator to quantify the effect of protection on forest disturbance. Protected areas in the Czech Republic, Slovakia, and the Ukraine had significantly less deforestation inside protected areas than outside in some periods; the likelihood of disturbance was reduced by 1–5%. The effectiveness of protection increased over time in these countries, whereas the opposite was true in Romania. Older protected areas were most effective in Romania and Hungary, but newer protected areas were more effective in Czech Republic, and Poland. Strict protection (International Union for Conservation of Nature [IUCN] protection category Ia‐II) was not more effective than landscape‐level protection (IUCN III‐VI). We suggest that the strength of institutions, the differences in forest privatization, forest management, prior distribution of protected areas, and when countries joined the European Union may provide explanations for the strikingly heterogeneous effectiveness patterns among countries. Our results highlight how different the effects of protected areas can be at broad scales, indicating that the effectiveness of protected areas is transitory over time and space and suggesting that generalizations about the effectiveness of protected areas can be misleading.     

土壤中4-溴苯胺降解动力学及其生态毒性追踪

秀谷隆是一种被广泛应用的取代脲类除草剂,其主要降解产物为４－溴苯胺（４－ＢＡ）,研究４－溴苯胺在不同土壤中的降解动力学规律,并用土壤环境指示动物弹尾目跳虫Ｃｏｌｌｅｍｂｏｌａ（Ｆｏｌｓｏｍｉａ ｃａｎｄｉｄａ）跟踪指示该化合物在进一步降解过程中的毒性,结果表明：４－溴苯胺在土壤中的降解行为可用一级反应动力学方程来较好地描述,其生态毒性明显高于母体化合物秀谷隆,该化合物在粘土中的残留量低于砂土,但毒     

Acetone and 2‐butanone creation associated with biological and chemical remediation of environmental contamination

Remediating environmental contamination by either biological or chemical methods typically results in the generation of temporary chemical intermediates as part of the process. These intermediate compounds may be related to either contaminant degradation pathways or reactions generated from the amendment itself. This article summarizes previously researched pathways and representative case studies discussing the authors' experience in generating relatively high concentrations of acetone and 2‐butanone (also referred to as methyl ethyl ketone [MEK]) during both biological and chemical treatments. Experience shows that even relatively high concentrations of acetone and MEK intermediates are quickly attenuated and prove not to be a hazard outside of the treatment area. © 2011 Wiley Periodicals, Inc.     

Assessing the biodegradation potential of polymers in screening- and long-term test systems

This paper presents a test scheme for assessing the biodegradation potential of polymers, starting with aquatic screening systems (aerobic and anaerobic) and continuing to long-term systems. At the end of the scheme the material has to prove its behavior under the relevant disposal conditions. Aerobic screening was performed mainly under aquatic conditions, but also in soil, using BOD-respirometry. Carbon balances were performed to obtain a better evaluation of the biodegradation potential. Under anaerobic conditions, biodegradation in an aquatic medium was followed by measuring CH₄ and CO₂ production. Polymers not fully degraded in the screening systems were tested in aquarium systems for at least 1 year. Biodegradation was followed by monitoring the DOC released in the water, mass loss, and microbial growth on the samples and in the water as well as via FTIR spectroscopy and SEM pictures. Results are presented for the polymers PHB, PHBV, PCL, Mater-Bi AI05H and ZF03U, and Bioceta. By combining the data from the screening with the aquarium system, a good picture of the degradation behavior of the polymers is obtained.Paper presented at the Bio/Environmentally Degradable Polymer Society—Third National Meeting, June 6–8, 1994, Boston, Massachusetts.     

Modeling of potential power plant plume impacts on Dallas-Fort Worth visibility

During wintertime, haze episodes occur in the Dallas-Ft. Worth (DFW) urban area. Such episodes are characterized by substantial light scattering by particles and relatively low absorption, leading to so-called "white haze." The objective of this work was to assess whether reductions in the emissions of SO2 from specific coal-fired power plants located over 100 km from DFW could lead to a discernible change in the DFW white haze. To that end, the transport, dispersion, deposition, and chemistry of the plume of a major power plant were simulated using a reactive plume model (ROME). The realism of the plume model simulations was tested by comparing model calculations of plume concentrations with aircraft data of SF6 tracer concentrations and ozone concentrations. A second-order closure dispersion algorithm was shown to perform better than a first-order closure algorithm and the empirical Pasquill-Gifford-Turner algorithm. For plume impact assessment, three actual scenarios were simulated, two with clear-sky conditions and one with the presence of fog prior to the haze. The largest amount of sulfate formation was obtained for the fog episode. Therefore, a hypothetical scenario was constructed using the meteorological conditions of the fog episode with input data values adjusted to be more conducive to sulfate formation. The results of the simulations suggest that reductions in the power plant emissions lead to less than proportional reductions in sulfate concentrations in DFW for the fog scenario. Calculations of the associated effects on light scattering using Mie theory suggest that reduction in total (plume + ambient) light extinction of less than 13% would be obtained with a 44% reduction in emissions of SO2 from the modeled power plant.     

Monitoring the levels of brominated and organophosphate flame retardants in passenger cars: Utilisation of car air filters as active samplers

Filters in residential and office air conditioning(A/C) systems have been used as sampling devices for monitoring different pollutants.However,cabin air filters(CAFs) in the A/C system of passenger cars have not been utilised for this purpose.In this study,we collected22 used CAFs from passenger cars in Hanoi,Vietnam to analyse for 8 polybrominated diphenyl ethers(PBDEs) and 10 organophosphate esters(OPEs).All the analytes were detected in more than 50% of samples with the exception of BDE153 an...     

Interactions between biological and abiotic pathways in the reduction of chlorinated solvents

While biologically mediated reductive dechlorination continues to be a significant focus of chlorinated solvent remediation, there has been an increased interest in abiotic reductive processes for the remediation of chlorinated solvents. In situ chemical reduction (ISCR) uses zero‐valent iron (ZVI)–based technologies, such as nanoscale iron and bimetallic ZVI, as well as naturally occurring reduced minerals incorporating dual‐valent iron (DVI), such as magnetite, green rust, and iron sulfides that are capable of dechlorinating solvents. A more recent area of development in ISCR has been in combining biological and abiotic processes. There are several ways in which biological and abiotic processes can be combined. First, the interaction between the two may be “causative.” For example, the Air Force Center for Engineering and the Environment's biogeochemical reductive dechlorination (BiRD) technology combines a mulch barrier with hematite and gypsum to create an iron‐sulfide‐based reducing zone. Biodegradation under sulfate‐reducing conditions produces sulfide that combines with the hematite to form iron sulfides. As such, the BiRD technology is “causative”; the biological processes create reducing minerals. The biological generation of other reducing minerals such as magnetite, siderite, and green rust is feasible and is, with magnetite, observed in nature at some petroleum sites. A second type of interaction between abiotic and biotic processes is “synergistic.” For example, biological processes can enhance the activity of reduced metals/minerals. This is the basis of the EHC® ISCR technologies, which combine ZVI with a (slowly) degradable carbon substrate. This combination rapidly creates buffered, strongly reducing conditions, which result in more complete solvent degradation (i.e., direct mineralization). The extent and level of reducing activity commonly observed are much greater when both the carbon substrate and the ZVI are present. When the carbon substrate is expended, the reducing activity due to ZVI alone is much less. The understanding of biogeochemical processes and their impact on abiotic processes is still developing. As that understanding develops, new and improved methods will be created to enhance volatile organic compound destruction. © 2009 Wiley Periodicals, Inc.     

Emission factors for PCDD/PCDF and dl-PCB from open burning of biomass

The Stockholm Convention on Persistent Organic Pollutants includes in its aims the minimisation of unintentional releases of polychlorinated dibenzo-dioxins and dibenzofurans (PCDD/PCDF) and dioxin like PCB (dl-PCB) to the environment. Development and implementation of policies to achieve this aim require accurate national inventories of releases of PCDD/PCDF/dl-PCB. To support this objective, the Conference of Parties established a process to review and update the UNEP Standardized Toolkit for Identification and Quantification of Dioxin and Furan Releases. An assessment of all emission inventories was that for many countries open burning of biomass and waste was identified as the major source of PCDD/PCDF releases. However, the experimental data underpinning the release estimates used were limited in number and, consequently, confidence in the accuracy of the emissions predictions was low. There has been significant progress in measurement technology since the last edition of the Toolkit in 2005. In this paper we reassess published emission factors for release of PCDD/PCDF and dl-PCB to land and air.In total, four types of biomass and 111 emission factors were assessed. It was found that there are no systematic differences in emission factors apparent between biomass types or fire classes. The data set is best described by a lognormal distribution. The geometric mean emission factors (EFs) for releases of PCDD/PCDF to air for the four biomass classes used in the Toolkit (sugarcane, cereal crops, forest and savannah/grass) are 1.6 μg TEQ (t fuel)⁻¹, 0.49 μg TEQ (t fuel)⁻¹, 1.0 μg TEQ (t fuel)⁻¹ and 0.4 μg TEQ (t fuel)⁻¹, respectively. Corresponding EFs for release of PCDD/PCDF to land are 3.0 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹, 1.1 ng TEQ (kg ash)⁻¹ and 0.67 ng TEQ (kg ash)⁻¹. There are now also sufficient published data available to evaluate EFs for dl-PCB release to air for sugarcane, forest and grass/savannah; these are 0.03 μg TEQ (t fuel)⁻¹, 0.09 μg TEQ (t fuel)⁻¹ and 0.01 μg TEQ (t fuel)⁻¹, respectively. The average EF for dl-PCB release to land is 0.19 ng TEQ (kg ash)⁻¹. Application of these EFs to national emissions of PCDD/PCDF for global estimates from open burning will lower previous estimates of PCDD/PCDF releases to air and to land by 85% and 90%, respectively. For some countries, the ranking of their major sources will be changed and open burning of biomass will become less significant than previously concluded.