MASS BALANCE MODEL ESTIMATION OF PHOSPHORUS CONCENTRATIONS IN RESERVOIRS1

ABSTRACT: Mass balance models have been common tools in lake quality management for some years. However, verification for use on reservoirs, especially in the Western United States, has been seriously lacking, In this study, such a verification is attempted using data from the U.S EPA National Eutrophication Survey. Several models from the literature are compared for accuracy in application to the western reservoir data. Model standard error and correlation between estimated and observed reservoir phosphorus concentrations are the Criteria used for comparison. Standard errors am further used to calculate uncertainty of trophic state classification based on estimated phosphorus concentration. The model proposed by Dillon and Rigler (1974) proved most accurate, with a correlation coefficient of 0.86 and standard error of 0.2, based on logarithmic transformed values. Deficiencies in the other models appear to & from coefficients fit to lake data and from inappropriate model formulation.     

Occurrence of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs) in Lake Maggiore (Italy and Switzerland)

Samples of air (gas and particulate phases), bulk deposition, aquatic settling material and sediments were collected in Lake Maggiore (LM) in order to determine their content of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). Air (gas and particulate phases) concentrations were 0.5 pg m(-3), 80 pg m(-3), 13 pg m(-3) and 106 pg m(-3) for SigmaPCDD/Fs, SigmaPCBs, Sigma dioxin-like PCBs (DL-PCBs) and SigmaPBDEs, respectively. Deposition fluxes ranged from 0.7 ng m(-2) d(-1) for SigmaPCDD/Fs to 32 ng m(-2) d(-1) for SigmaPCBs. Aquatic settling material presented concentrations of 0.4 ng g(-1) dry weight (dw) for SigmaPCDD/Fs, 13 ng g(-1) dw for SigmaPCB, 3.4 ng g(-1) dw for SigmaDL-PCBs and 5.7 ng g(-1) dw for SigmaPBDEs. Mean sediment concentrations were 0.4 ng g(-1) dw for SigmaPCDD/Fs, 11 ng g(-1) dw for SigmaPCB, 3 ng g(-1) dw for SigmaDL-PCBs and 5.1 ng g(-1) dw for SigmaPBDEs. Similar PCDD/F and DL-PCB congener patterns in all the environmental compartments of LM point to an important, if not dominant, contribution of atmospheric deposition as source of these pollutants into LM. In contrast, PBDE congener distribution was not similar in the different environmental compartments. BDE 47 dominated air and settling material, while BDE 209 was the predominant congener in the bulk atmospheric deposition. Moreover, sediments showed two distinct PBDE congener profiles. Lower PBDE concentrated sediments were dominated by congeners 47 and 99, while BDE 209 dominated in higher PBDE concentrated samples. This suggests the influence of local sources as well as atmospheric input of PBDEs into LM.     

Spatial mapping of city-wide PBDE levels using an exponential decay model

Passive air samplers (PAS) consisting of polyurethane foam (PUF) disks were deployed at 6 outdoor air monitoring stations in different land use categories (commercial, industrial, residential and semi-rural) to assess the spatial distribution of polybrominated diphenyl ethers (PBDEs) in the Brisbane airshed. Air monitoring sites covered an area of ~1143 km(2) and PAS were allowed to accumulate PBDEs in the city's airshed over three consecutive seasons commencing in the winter of 2008. The average sum of five (∑(5)) PBDEs (BDEs 28, 47, 99, 100 and 209) levels were highest at the commercial and industrial sites (12.7 ± 5.2 ng PUF(-1)), which were relatively close to the city center and were a factor of 8 times higher than residential and semi-rural sites located in outer Brisbane. To estimate the magnitude of the urban 'plume' an empirical exponential decay model was used to fit PAS data vs. distance from the CBD, with the best correlation observed when the particulate bound BDE-209 was not included (∑(5)-209) (r(2) = 0.99), rather than ∑(5) (r(2) = 0.84). At 95% confidence intervals the model predicts that regardless of site characterization, ∑(5)-209 concentrations in a PAS sample taken between 4-10 km from the city centre would be half that from a sample taken from the city centre and reach a baseline or plateau (0.6 to 1.3 ng PUF(-1)), approximately 30 km from the CBD. The observed exponential decay in ∑(5)-209 levels over distance corresponded with Brisbane's decreasing population density (persons/km(2)) from the city center. The residual error associated with the model increased significantly when including BDE-209 levels, primarily due to the highest level (11.4 ± 1.8 ng PUF(-1)) being consistently detected at the industrial site, indicating a potential primary source at this site. Active air samples collected alongside the PAS at the industrial air monitoring site (B) indicated BDE-209 dominated congener composition and was entirely associated with the particulate phase. This study demonstrates that PAS are effective tools for monitoring citywide regional differences however, interpretation of spatial trends for POPs which are predominantly associated with the particulate phase such as BDE-209, may be restricted to identifying 'hotspots' rather than broad spatial trends.     

Air Quality Criteria—Toxicological Appraisal for Oxidants,Nitrogen Oxides,and Hydrocarbons

The ultimate aim of toxicological studies is to determine the effects of pollutants on the health and welfare of human beings. To get this it is essential to conduct animal studies to evaluate the potential toxicity of different pollutants. Toxicological appraisal of the photochemical oxidant type of air pollution shows: (1) The effects are primarily on the lungs and the senses. (2) There is impairment of pulmonary function in humans at concentrations found in polluted air. (3) Both ozone and nitrogen dioxide tend to oxidize in animals the lung tissue for a time. This process creates agents which have the potential for cross-linking structural proteins, and this process initiates inflammation which accelerates cell turnover rates. Both crosslinking and cell turnover rates are factors in aging, which may thus be accelerated by years of repeated exposure to oxidants. (4) Long-term exposure to low levels of nitrogen dioxide can produce pre-emphasematous lesions in the lungs of rats and mice. Studies with other species are needed. (5) Ozone, nitrogen dioxide, and dilute irradiated car exhausts increase susceptibility to respiratory infection.

The constant search for more sophisticated and sensitive techniques to detect subtle changes indicative of pre-disease conditions should not be relaxed. Such techniques will provide chronic disease predictors of great relevance as air quality criteria.     

Urea as a PCDD/F Inhibitor in Municipal Waste Incineration

ABSTRACT

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from municipal waste incineration have been widely studied because of their extensive toxicity, and many efforts have been made to restrict their emissions. Although a number of chemical compounds have been shown in laboratory-scale tests to inhibit the formation of PCDD/Fs, few have been tested in pilot- or full-scale plants. This work evaluates the effect of urea as a PCDD/F inhibitor in a pilot-scale incinerator that uses refuse-derived fuel (RDF). The decomposition of urea under the test conditions was also studied using detailed kinetic modeling. An aqueous solution of urea was injected into the flue gas stream after the furnace at ~730 °C, with varied urea concentrations and flue gas residence times used between the furnace and the sampling point. The results demonstrate that urea can successfully inhibit PCDD/F formation in waste incineration if concentrations and injection points are properly adjusted. The kinetic model showed that urea can be rapidly decomposed under appropriate flue gas conditions, indicating that in addition to the urea molecule itself, decomposition products of urea can also be responsible for the reduction of PCDD/F production during incineration.     

Neutralization/prevention of acid rock drainage using mixtures of alkaline by-products and sulfidic mine wastes

Backfilling of open pit with sulfidic waste rock followed by inundation is a common method for reducing sulfide oxidation after mine closure. This approach can be complemented by mixing the waste rock with alkaline materials from pulp and steel mills to increase the system’s neutralization potential. Leachates from 1 m³ tanks containing sulfide-rich (ca.30 wt %) waste rock formed under dry and water saturated conditions under laboratory conditions were characterized and compared to those formed from mixtures. The waste rock leachate produced an acidic leachate (pH?<?2) with high concentrations of As (65 mg/L), Cu (6 mg/L), and Zn (150 mg/L) after 258 days. The leachate from water-saturated waste rock had lower concentrations of As and Cu (<2 μg/L), Pb and Zn (20 μg/L and 5 mg/L), respectively, and its pH was around 6. Crushed (<6 mm) waste rock mixed with different fractions (1–5 wt %) of green liquid dregs, fly ash, mesa lime, and argon oxygen decarburization (AOD) slag was leached on a small scale for 65 day, and showed near-neutral pH values, except for mixtures of waste rock with AOD slag and fly ash (5 % w/w) which were more basic (pH?>?9). The decrease of elemental concentration in the leachate was most pronounced for Pb and Zn, while Al and S were relatively high. Overall, the results obtained were promising and suggest that alkaline by-products could be useful additives for minimizing ARD formation.     

Blood dioxin biomonitoring to assess local residents' exposure from a large urban remediation project

Background

A total of 265 000 m³ of dioxin contaminated soil and sediments from past industrial activity was treated on site in an urban setting in Sydney, Australia. To respond to local community concerns about potential dioxin exposure from fugitive emissions a human biomonitoring study was undertaken.

Objective

To determine whether local residents were exposed to significant amounts of dioxin from the remediation process.Methods: Blood samples were collected from local residents around the site and a representative metropolitan control group. They were pooled within age and sex strata and the change in dioxin concentrations over the remediation period and a summary of the mid point and post remediation dioxin concentrations were compared between groups. Information on dietary intake was collected to look for possible confounding.

Results

The mean dioxin Toxic Equivalent concentrations (TeQ) decreased among both the local resident and control groups over the remediation period by 1.9 and 2.1 pg gm⁻¹ lipid respectively. Modelled blood concentrations adjusting for age and sex did not detect a significant difference between groups for changes in either TeQ or 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8 TCDD). The summary measure approach did however demonstrate that the 2,3,7,8 TCDD concentrations among the local resident group was approximately 0.7 pg g⁻¹ lipid higher compared to the control group post remediation. There were no significant changes in dietary intake sources of dioxin.

Conclusion

Biomonitoring demonstrated that local residents were not exposed to significant quantities of dioxin. Large scale remediation of dioxin contaminated land can be safely undertaken in an urban setting.     

Successful ISCR‐enhanced bioremediation of a TCE DNAPL source utilizing EHC® and KB‐1®

Remediation of chlorinated solvent DNAPL sites often meets with mixed results. This can be attributed to the diametrically opposed nature of the impacts, where the disparate dissolved‐phase plume is more manageable than the localized, high‐concentration source area. A wide range of technologies are available for downgradient plume management, but the relative mass of contaminants in a DNAPL source area generally requires treatment for such technologies to be effective over the long term. In many cases, the characteristics of DNAPL source zones (e.g., depth, soil heterogeneity, structural limitations) limit the available options. The following describes the successful full‐scale implementation of in situ chemical reduction (ISCR) enhanced bioremediation of a TCE DNAPL source zone. In this demonstration, concentrations of TCE were rapidly reduced to below the maximum contaminant level (MCL) in less than six months following implementation. The results described herein suggest that ISCR‐enhanced bioremediation is a viable remedial alternative for chlorinated solvent source zones. © 2010 Wiley Periodicals, Inc.     

Study of the relationship of distant SO2 emissions to Dallas-Fort Worth winter haze

A study was conducted to estimate the changes in wintertime visual air quality in Dallas-Fort Worth (DFW) that might occur due to proposed reductions in SO2 emissions at two steam electric generating plants in eastern Texas, each over 100 km from the city. To provide information for designing subsequent investigations, the haze was characterized broadly during the first year of the study. Meteorological data acquired then demonstrated that, during haze episodes, emissions from only one of the two plants were likely to be transported directly to DFW. Therefore, the second year of the study was centered on just one of the power plants. Air quality was then characterized within the urban area and at rural locations that would be upwind and downwind of the plant during transport to DFW. An instrumented aircraft measured plume dispersion and the air surrounding the plume on selected days. A mathematical model was used to predict the change that would occur in airborne particulate matter concentrations in DFW if SO2 emissions were reduced to reflect the proposed limitations. The contribution of particles in the atmosphere to light extinction was estimated, and simulated photographs were produced to illustrate the visibility changes. The study concluded that the proposed emission reductions would, at most, subtly change perceived wintertime visibility.