In vitro evaluation of the effect of dibutyl phthalate on electrogenic sodium-linked glucose transport in isolated rabbit ileum

Dibutyl phthalate, a known endocrine disruptor, is a commonly used plasticizer that influences the glucose homeostasis. The present study elucidates the effects of dibutyl phthalate (1 and 5 mmol/L) on electrogenic sodium-linked glucose transport in the isolated rabbit ileum with ‘Ussing chamber.’ Serosal addition of dibutyl phthalate has no effect on glucose-based electrogenic changes in short circuit current, and no effect of dibutyl phthalate is observed on ileal tissue conductance and catalase activity. However, mucosal addition of dibutyl phthalate in the presence of glucose shows a trend of decrease in short circuit current compared with the control. This indicates that dibutyl phthalate may have a deleterious effect on the electrogenic intestinal glucose transport.     

Quality of tube well water intended for irrigation and human consumption with special emphasis on arsenic contamination at the area of Punjab,Pakistan

In the present study, the tube well water quality and the associated health risks, emphasizing on arsenic contamination, were investigated in rural and urban samples from Tehsil Mailsi located in Punjab, Pakistan. Arsenic concentrations (μg/L) were ranged from 12 to 448.5 and which exceeded the WHO recommended limit (10 μg/L) in all cases. The calculated average daily dose (3.3 × 10^?0.4 to 1.2 × 10^?0.2 mg/kg day) and hazard quotient (1.1–40) reflected the potential health risk to local population due to tube well water consumption as drinking purpose. Sodium percent (Na%), sodium absorption ratio, residual sodium carbonate, Kelly’s index and magnesium absorption ratio were also determined to assess the suitability of tube well water for irrigation purpose. The resulting piper plot revealed the Na–Ca–HCO₃ type water chemistry of the area and generally alkaline environment. The spatial distribution of arsenic in the tube well waters pinpoints the significant contribution of anthropogenic activities to arsenic pollution. Nevertheless, different statistical tools, including principal component analysis, hierarchical cluster analysis and correlation matrices, revealed the contribution of both natural and anthropogenic activities and alkaline type of aquifers toward the high level of arsenic contamination.     

Flow injection online spectrophotometric determination of uranium after preconcentration on XAD-4 resin impregnated with nalidixic acid

In this work, spectrophotometer was used as a detector for the determination of uranium from water, biological, and ore samples with a flow injection system coupled with solid phase extraction. In order to promote the online preconcentration of uranium, a minicolumn packed with XAD-4 resin impregnated with nalidixic acid was utilized. The system operation was based on U(VI) ion retention at pH 6 in the minicolumn at flow rate of 15.2 mL min^?1. The uranium complex was removed from the resin by 0.1 mol dm^?3 HCl at flow rate of 3.2 mL min^?1 and was mixed with arsenazo III solution (0.05 % solution in 0.1 mol dm^?3 HCl, 3.2 mL min^?1) and driven to flow through cell of spectrophotometer where its absorbance was measured at 651 nm. The influence of chemical (pH and HCl (as eluent and reagent medium) concentration) and flow (sample and eluent flow rate and preconcentration time) parameters that could affect the performance of the system as well as the possible interferents was investigated. At the optimum conditions for 60 s preconcentration time (15.2 mL of sample volume), the method presented a detection limit of 1.1 μg L^?1, a relative standard deviation (RSD) of 0.8 % at 100 μg L^?1, enrichment factor of 30, and a sample throughput of 42 h^?1, whereas for 300 s of the preconcentration time (76 mL of sample volume), a detection limit of 0.22 μg L^?1, a RSD of 1.32 % at 10 μg L^?1, enrichment factor of 150, and a sampling frequency of 11 h^?1 were reported.     

Heavy metal accumulation in edible fish species from Rawal Lake Reservoir, Pakistan

The aim of the present study was to describe the accumulation of trace metals in the liver, kidney, gills, muscles, and skin of four edible fish species (Tor putitora, Cirrhinus mrigala, Labeo calbasu, and Channa punctatus) of Rawal Lake Reservoir, Pakistan. The fish samples were collected in the pre-monsoon (May 2008) and post-monsoon (October 2007) seasons and were analyzed for heavy metals by using an atomic absorption spectrometer. Kidney and liver showed relatively high concentrations of heavy metals. The accumulation of metals in the different organs of the fish (skin, muscles, and gills) in post-monsoon was higher than in pre-monsoon. In pre-monsoon, the metals followed the trend Zn > Pb > Fe > Cr > Ni > Mn > Co > Cu > Cd > Li, while in the post-monsoon season, the trend was Fe > Pb > Cr > Ni > Zn > Cu > Co > Mn > Cd > Li. The concentrations of Ni, Cr, and Pb in the muscle of all fish species were higher than the WHO guideline values of heavy metals in fishes for human consumption except in T. putitora. Cu level was nearly equal to the WHO maximum levels in C. mrigala and L. calbasu, while it was lower in T. putitora and C. punctatus. It is strongly advocated that risk assessment studies should be conducted and there is an urgent need for water quality restoration and management of Rawal Lake Reservoir.     

Assessment of cadmium accumulation,toxicity, and tolerance in Brassicaceae and Fabaceae plants—implications for phytoremediation

This study, based on a greenhouse pot culture experiment conducted with 15-day-old rapeseed (Brassica campestris L. cv. Pusa Gold; family Brassicaceae) and moong bean (Vigna radiata L. Wilczek cv. Pusa Ratna; family Fabaceae) plants treated with cadmium (Cd) concentrations (0, 50, and 100 mg kg^?1 soil), investigates their potential for Cd accumulation and tolerance, and dissects the underlying basic physiological/biochemical mechanisms. In both species, plant dry mass decreased, while Cd concentration of both root and shoot increased with increase in soil Cd. Roots harbored a higher amount of Cd (vs. shoot) in B. campestris, while the reverse applied to V. radiata. By comparison, root Cd concentration was higher in B. campestris than in V. radiata. The high Cd concentrations in B. campestris roots and V. radiata shoots led to significant elevation in oxidative indices, as measured in terms of electrolyte leakage, H₂O₂ content, and lipid peroxidation. Both plants displayed differential adaptation strategies to counteract the Cd burden-caused anomalies in their roots and shoots. In B. campestris, increasing Cd burden led to a significantly decreased reduced glutathione (GSH) content but a significant increase in activities of GSH reductase (GR), GSH peroxidase (GPX), and GSH sulfotransferase (GST). However, in V. radiata, increasing Cd burden caused significant increase in GSH content and GR activity, but a significant decline in activities of GPX and GST. Cross talks on Cd burden of tissues and the adapted Cd tolerance strategies against Cd burden-accrued toxicity indicated that B. campestris and V. radiata are good Cd stabilizer and Cd extractor, respectively, wherein a fine tuning among the major components (GR, GPX, GST, GSH) of the GSH redox system helped the plants to counteract differentially the Cd load-induced anomalies in tissues. On the whole, the physiological/biochemical characterization of the B. campestris and V. radiata responses to varying Cd concentrations can be of great help in elaborating the innovative plant-based remediation technologies for metal/metalloid-contaminated sites.     

Genotypic Variation in the Phytoremediation Potential of Indian Mustard for Chromium

The term “phytoremediation” is used to describe the cleanup of heavy metals from contaminated sites by plants. This study demonstrates phytoremediation potential of Indian mustard (Brasicca juncea (L.) Czern. & Coss.) genotypes for chromium (Cr). Seedlings of 10 genotypes were grown hydroponically in artificially contaminated water over a range of environmentally relevant concentrations of Cr (VI), and the responses of genotypes in the presence of Cr, with reference to Cr accumulation, its phytotoxity and anti-oxidative system were investigated. The Cr accumulation potential varied largely among Indian mustard genotypes. At 100 μM Cr treatment, Pusa Jai Kisan accumulated the maximum amount of Cr (1680 μg Cr g⁻¹ DW) whereas Vardhan accumulated the minimum (107 μg Cr g⁻¹ DW). As the tolerance of metals is a key plant characteristic required for phytoremediation purpose, effects of various levels of Cr on biomass were evaluated as the gross effect. The extent of oxidative stress caused by Cr stress was measured as rate of lipid peroxidation. The level of thiobarbituric acid reactive substances (TBARS) was enhanced at all Cr treatments when compared to the control. Inductions of enzymatic and nonenzymatic antioxidants were monitored as metal-detoxifying responses. All the genotypes responded to Cr-induced oxidative stress by modulating nonenzymatic antioxidants [glutathione (GSH) and ascorbate (Asc)] and enzymatic antioxidants [superoxide dismutase (SOD), ascorbate peroxidase (APX), and glutathione reductase (GR)]. The level of induction, however, differed among the genotypes, being at its maximum in Pusa Jai Kisan and its minimum in Vardhan. Pusa Jai Kisan was grown under natural field conditions with various Cr treatments, and Cr-accumulation capacity was studied. The results confirmed that Pusa Jai Kisan is a hyperaccumulator of Cr and hypertolerant to Cr-induced stress, which makes this genotype a viable candidate for use in the development of phytoremediation technology of Cr-contaminated sites.     

Performance of oil palm kernel shell gasification using a medium-scale downdraft gasifier

This article focused on the performance of oil palm kernel shell (PKS) gasification using a medium-scale downdraft gasifier with a feedstock capacity of 500 kg at a temperature range of 399–700°C and at a feed rate of 177 kg/h. This article is important for evaluating the reliability of PKS gasification for commercial power generation activities from biomass. The process performance was evaluated based on the syngas calorific value (CV), syngas flow rate, and its cold gas efficiency (CGE). The syngas flow rates and CVs were measured using a gas flow meter and a gas analyzer in real time. The data obtained were then analyzed to evaluate the performance of the process. The results showed that the CGE of the process was moderately high (51%) at 681°C, with a high syngas CV (4.45–4.89 MJ/Nm³) which was ideal for gas engine applications. The PKS gasification performance increased when the reactor temperature increased. Projections were made for the CGE and the syngas CV for the PKS gasification with increased reactor temperatures and it was found that these values could be increased up to 80% and 5.2 MJ/Nm^3, respectively at a reactor temperature of 900°C. In addition, the estimated power that could be generated was about 600 kW_e at a maximum operation of 500 kg/h of feed rate. Based on the analysis, a medium-scale PKS gasification is observed to be a promising process for power generation from biomass due to the favorable performance of the process.     

Biodiesel synthesis and characterization using welted thistle plant (Carduus acanthoides) as source of new non-edible seed oil

In this work we applied base catalyzed transesterification to convert non-edible welted thistle oil (Carduus acanthoides) as new non-edible feedstock into biodiesel (Fatty acid methyl esters). The highest biodiesel yield of 88% was obtained using optimized reaction conditions of 70°C and 5:1 molar ratio (methanol:oil). The synthesized esters were characterize and confirmed by the application of NMR and FT-IR techniques. Gas chromatography and mass spectroscopy identified different fatty acids as palmatic acid (C16:0), oleic acid (C18:1), linoleic acid (18:2), arachidic acid (C20:0), eicosanic acid (C20:1), and erucic acid (C22:1) in the oil of welted thistle. Six corresponding methyl esters reported in welted thistle oil biodiesel includes 9-hexadecenoic acid, hexadecanoic acid, 9-octadecadienoic acid, 11-eicosanoic acid, eicosanoic acid and 13-docosenoicacid. Fuel properties, such as density @40°C Kg/L (0.8470), kinematic viscosity @ 40°C c St (4.37), flash point (95°C), cloud point (+4°C), pour point (?5°C), and sulfur contents (0.0112% wt) of the biodiesel produced were compatible with American Society for Testing and Materials D 6751 specifications.     

Ethanol production from alkali-pretreated oil palm empty fruit bunch by simultaneous saccharification and fermentation with mucor indicus

Oil palm empty fruit bunch (OPEFB) is a potential raw material for production of lignocellulosic bioethanol. The OPEFB was pretreated with 8% sodium hydroxide (NaOH) solution at 100°C for 10 to 90 min. Enzymatic digestion was carried out using cellulase and β-glucosidase at 45°C for 24 h. It was then inoculated with Mucor indicus spores suspension and fermented under anaerobic conditions at 37°C for 96 h. Sodium hydroxide pretreatment effectively removed 51–57% of lignin in the OPEFB and also its hemicellulose (40–84%). The highest glucan digestibility (0.75 g/g theoretical glucose) was achieved in 40-min NaOH pretreatment. Fermentation by M. indicus resulted in 68.4% of the theoretical ethanol yield, while glycerol (16.2–83.2 mg/g), succinic acid (0–0.4 mg/g), and acetic acid (0–0.9 mg/g) were its by-products. According to these results, 11.75 million tons of dry OPEFB in Indonesia can be converted into 1.5 billion liters of ethanol per year.     

Recent progress in bioethanol production from lignocellulosic materials: A review

Natural energy sources like petrol and diesel are going to be diminished in the coming future which will lead to increase in the prices and demands of fossil fuels. Therefore, it is important to find a sustainable alternate of fossil fuels. Bioethanol is one of the alternatives, which is produced from different feedstocks including sugar-based, starch-based and lignocellulose-based materials through fermentation. Since sugar-based (sugar cane and sugar beet) and starch-based (corn) materials are sources of staple food, therefore, research on lignocellulosic materials for bioethanol production is a subject of recent studies. Ethanol production from lignocellulosic materials involves different steps, such as pretreatment, hydrolysis, followed by fermentation process and finally ethanol purification. In this review, we have summarized the recent progresses in bioethanol production and processing from lignocellulosic materials.