Marine litter in coral reef areas along the Jordan Gulf of Aqaba, Red Sea

Composition and abundance of submerged marine litter at six selected sites within a coral reef area along the Jordanian coast of the Gulf of Aqaba have been estimated. The litter was collected in clean up voluntary campaigns that took place in the period between 25 August 2003 and 29 February 2004. A total of 10,506 items weighing 1159 kg were collected during the survey. Mean litter density in the individual sampling sites varied between 1 and 6 items/m(2) with an overall mean density of 2.8 items/m(2). The mean weight of the collected items per sampling site varied between 0.06 and 1.06 kg/m(2) with an overall mean of 0.31 kg/m(2). Plastic accounted for 42% of the collected items, fishing gear was the second most abundant (31%) while metal was the third most abundant item (17%). By comparison, cardboard constituted 1%, and rubber and other items accounted for less than 1% of the total items collected during the campaigns. Approximately 61% of the plastics consisted of bags followed by bottles (24%), plastic containers and sheets accounted for 13 and 2%, respectively. Statistical analysis indicates no significant differences between the sites in terms of litter count and weight. Potential sources are pointed out and recommendations and actions to address the problem are suggested.     

Effects of lead and cadmium nitrate on biomass and substrate utilization pattern of soil microbial communities

A study was conducted to evaluate the effects of different concentrations of lead (Pb) and cadmium (Cd) applied as their nitrates on soil microbial biomass carbon (C(mic)) and nitrogen (N(mic)), and substrate utilization pattern of soil microbial communities. The C(mic) and N(mic) contents were determined at 0, 14, 28, 42 and 56 days after heavy metal application (DAA). The results showed a significant decline in the C(mic) for all Pb and Cd amended soils from the start to 28 DAA. From 28 to 56 DAA, C(mic) contents changed non-significantly for all other treatments except for 600 mgkg(-1) Pb and 100 mgkg(-1) Cd in which it declined significantly from 42 to 56 DAA. The N(mic) contents also decreased significantly from start to 28 DAA for all other Pb and Cd treatments except for 200 mgkg(-1) Pb which did not show significant difference from the control. Control and 200 mgkg(-1) Pb had significantly lower soil microbial biomass C:N ratio as compared with other Pb treatments from 14 to 42 DAA, however at 56 DAA, only 1000 mgkg(-1) Pb showed significantly higher C:N ratio compared with other treatments. No significant difference in C:N ratio for all Cd treated soils was seen from start to 28 DAA, however from 42 to 56 DAA, 100 mgkg(-1) Pb showed significantly higher C:N ratio compared with other treatments. On 56 DAA, substrate utilization pattern of soil microbial communities was determined by inoculating Biolog ECO plates. The results indicated that Pb and Cd addition inhibited the functional activity of soil microbial communities as indicated by the intensity of average well color development (AWCD) during 168 h of incubation. Multivariate analysis of sole carbon source utilization pattern demonstrated that higher levels of heavy metal application had significantly affected soil microbial community structure.     

Assessment of sulfurous springs in the west of Iraq for balneotherapy,drinking, irrigation and aquaculture purposes

This research deals with the sulfurous spring waters flow along the course of the Euphrates River in western Iraq in the area extended between Haqlaniya and Hit within the Al-Anbar governorate. Eleven springs (3 in Haqlanya, 4 in Kubaysa and 4 in Hit) have been addressed for the purpose of water evaluation for balneology, drinking, irrigation and aquaculture (fish farming). In order to meet the objectives of this research, all springs were sampled and analyzed for the total dissolved solid, electrical conductivity, pH, temperature, major cations (Ca²⁺, Mg²⁺, Na⁺ and K⁺), major anions (SO₄ ^2?, Cl^?, HCO₃ ^? and CO₃ ^2?), minor anions (PO₄ ^3?and NO₃ ^?) as well as the trace elements that included Pb, Zn, Cd, Ni, Fe, Mn, Cu, Br, F, Ba, B, Sr, Al, As, Cr, Hg and Se. The International Standards of World Health Organization are used for assessing the water quality. The results revealed that the springs belong to the tepid springs of 27–30 °C and classified as hypothermal to the thermal springs. Lithochemistry and geochemical processes clearly affected the water chemistry. The hydrogeochemical processes are responsible for the element enrichment in water by the chemical dissolution of carbonate and gypsum and evaporation as well. The results of the study indicate the possibility of using spring water for therapeutic purposes, but not allowed for drinking and aquaculture (fish farming), except those free of H₂S gas. On the other hand, it can be used for irrigation with risk. However, soil type as well as proper selection of plants should be taken into consideration.     

Faecal and nitrate contamination in the groundwater of Mardan district,Pakistan

Environmental Geochemistry and Health - This study aimed to determine the status of groundwater contamination with faecal coliform and nitrate in the rural areas of Mardan district, Pakistan. Both...     

Correction to: Health risk assessment of hexachlorocyclohexane in soil,water and plants in the agricultural area of Potohar region,Punjab, Pakistan

Environmental Geochemistry and Health - A correction to this paper has been published: https://doi.org/10.1007/s10653-021-00910-5     

Occurrence,abundance, and distribution of microplastics pollution: an evidence in surface tropical water of Klang River estuary,Malaysia

Environmental Geochemistry and Health - Microplastics have been considered as contaminants of emerging concern due to ubiquity in the environment; however, the occurrence of microplastics in river...     

Solar photo-oxidation of recalcitrant industrial wastewater: a review

Conventional methods to clean wastewater actually lead to incomplete treatments, calling for advanced technologies to degrade recalcitrant pollutants. Herein we review solar photo-oxidation to degrade the recalcitrant contaminants in industrial wastewater, with focus on photocatalysts, reactor design and the photo-Fenton process. We discuss limitations due to low visible-light absorption, catalyst collection and reusability, and production of toxic by-products. Photodegradation of refractory organics by solar light is controlled by pH, photocatalyst composition and bandgap, pollutant properties and concentration, irradiation type and intensity, catalyst loading, and the water matrix.

     

Factors affecting the distribution of microplastics in soils of China

● Microplastic (MP) abundance in soil of China was highly heterogeneous. ● MP abundance was higher near large rivers and central land affected by monsoons. ● MP abundance was correlated with longitude, mulching film, and average temperature. ● Factors suitable for predicting MP pollution using models were discussed. Microplastics (MPs) are found worldwide in high abundance, posing a potential threat to ecosystems. Despite the ubiquity of MPs in the environment, very little is known about the regional distribution of MPs and underlying factors affecting this distribution in the field, which likely include human activity, but also features of the environment itself. Here, out of a total of 1157 datapoints investigated in 53 Chinese studies, 9.68% datapoints were removed as outliers in the heterogeneity analysis. This review revealed that the abundance of MPs was highly heterogeneous. In addition, microplastic (MP) distribution maps based on China demonstrated that the highest abundance of MPs tended to occur near large rivers and central land affected by the intersection of two monsoons. The model-fitting and previous studies showed that MP abundance in China was correlated with longitude, agricultural mulching film usage per capita, temperature, and precipitation. However, due to the heterogeneity of MPs and the low matching degree between the current environmental data and the sampling points, this pattern was not as evident as reported in any single study. Factors affecting the distribution of MPs can not be captured by linear relationships alone, and systematic selection of suitable environmental factors and further model optimization are needed to explore the cause of MP pollution in soil. Overall, this review revealed an uneven distribution of MPs and serves as a reference for model prediction to assess and control plastic pollution in natural soil environments.     

Preparation of Cellulose Nanocrystals Using an Ionic Liquid

In this paper cellulose nanocrystals were prepared by treating microcrystalline cellulose with 1-butyl-3-methylimidazolium hydrogen sulphate ionic liquid. Cellulose nanocrystals, after separation from ionic liquid, were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR), Field emission scanning electron microscopy (FESEM) Transmission Electron Microscope (TEM) and Thermogravimetric analysis. XRD results showed no changes in type of cellulose after the treatment with ionic liquid, however, high crystallinity index was observed in the ionic liquid treated sample. Cellulose nanocrystals, having length around 50–300 nm and diameter around 14–22 nm were observed in the ionic liquid treated sample under FESEM and TEM, and similar patterns of peaks as that of microcrystalline cellulose were observed for cellulose nanocrystals in the FTIR spectra. The thermal stability of the cellulose nanocrystals was measured low as compare to microcrystalline cellulose.